liliana/r-link-uboot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
r-link-uboot/drivers
History
Sergei Shtylyov b7598a43f2 [PATCH] Avoid assigning PCI resources from zero address 
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
core complains and IDE drivers fails to work.  Also, assigning zero to a BAR
was illegal according to PCI 2.1 (the later revisions seem to have excluded the
sentence about "0" being considered an invalid address) -- so, use a reasonable
starting value of 0x1000 (that's what the most Linux archs are using).

Alternatively, one might have fixed the calls to pci_set_region() individually
(some code even seems to have taken care of this issue) but that would have
been a lot more work. :-)

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-05-05 21:31:08 +02:00
..
nand
NAND: Wrong calculation of page number in nand_block_bad()
2007-05-05 07:04:42 +02:00
nand_legacy
Move "ar" flags to config.mk to allow for silent "make -s"
2006-10-09 01:02:05 +02:00
qe
mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
2007-03-02 11:05:53 -06:00
sk98lin
Move "ar" flags to config.mk to allow for silent "make -s"
2006-10-09 01:02:05 +02:00
3c589.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
3c589.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
5701rls.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
5701rls.h
Initial revision
2002-11-03 00:24:07 +00:00
8390.h
Coding Style cleanup
2005-01-10 00:01:04 +00:00
ahci.c
Cleanup and lindent new AHCI driver.
2006-08-23 11:04:43 -05:00
ali512x.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
atmel_usart.c
AVR32: Resource management rewrite
2007-04-14 15:20:27 +02:00
atmel_usart.h
AVR32: Resource management rewrite
2007-04-14 15:20:27 +02:00
bcm570x_autoneg.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x_autoneg.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x_bits.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x_debug.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x_lm.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x_mm.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x_queue.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
bcm570x.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
cfb_console.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
cfi_flash.c
[PATCH v3] Add sync to ensure flash_write_cmd is fully finished
2007-02-21 16:52:31 +01:00
cs8900.c
* Patches by David Müller, 14 Nov 2003:
2003-12-07 18:32:37 +00:00
cs8900.h
Code cleanup; make several boards compile & link.
2004-03-14 22:25:36 +00:00
ct69000.c
Add VGA support (CT69000) to CPCI750 board.
2006-01-18 20:05:34 +01:00
dataflash.c
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
dc2114x.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
dm9000x.c
Fix drivers/dm9000.c when configured in 32 bit mode.
2006-08-14 21:18:21 +02:00
dm9000x.h
* Code cleanup
2004-08-01 22:48:16 +00:00
ds1722.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
e1000.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
e1000.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
eepro100.c
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
fsl_i2c.c
mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
2007-03-02 11:05:54 -06:00
i8042.c
Minor code cleanup
2006-03-06 13:03:37 +01:00
i82365.c
Fix cirrus voltage detection (for CPC45)
2005-02-07 19:44:17 +00:00
inca-ip_sw.c
Patch by Markus Pietrek, 04 May 2004:
2004-06-09 00:10:59 +00:00
keyboard.c
Fix support for PS/2 keyboard on TQM85xx boards
2006-07-19 14:49:35 +02:00
ks8695eth.c
Fix compile problem
2006-03-12 22:14:20 +01:00
lan91c96.c
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
lan91c96.h
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
macb.c
Atmel MACB ethernet driver
2007-04-14 16:14:06 +02:00
macb.h
Atmel MACB ethernet driver
2007-04-14 16:14:06 +02:00
Makefile
Cleanup, update CHANGELOG
2007-04-18 17:07:26 +02:00
mpc8xx_pcmcia.c
More code cleanup
2006-07-21 15:24:56 +02:00
mw_eeprom.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
natsemi.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
ne2000.c
* Patches by Richard Woodruff, 01 Oct 2004:
2005-01-09 23:16:25 +00:00
ne2000.h
* Patches by Richard Woodruff, 01 Oct 2004:
2005-01-09 23:16:25 +00:00
netarm_eth.c
* Patch by Laurent Mohin, 10 Feb 2004:
2004-02-23 20:48:38 +00:00
netarm_eth.h
* Patch by Thomas Elste, 10 Feb 2004:
2004-02-23 19:30:57 +00:00
netconsole.c
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
nicext.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
ns7520_eth.c
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
ns8382x.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
ns9750_eth.c
* Patch by Markus Pietrek, 24 Feb 2004:
2004-02-26 23:46:20 +00:00
ns9750_serial.c
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled
2006-08-30 23:02:10 +02:00
ns16550.c
* Patches by Richard Woodruff, 01 Oct 2004:
2005-01-09 23:16:25 +00:00
ns87308.c
Initial revision
2002-11-03 00:24:07 +00:00
omap24xx_i2c.c
OMAP242x H4 board update
2005-09-25 18:41:04 +02:00
omap1510_i2c.c
Add support for Siemens SX1 mobile phone;
2004-03-12 00:14:09 +00:00
pc_keyb.c
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
pci_auto.c
[PATCH] Avoid assigning PCI resources from zero address
2007-05-05 21:31:08 +02:00
pci_indirect.c
Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 18:19:42 +02:00
pci.c
Add support for wrPPMC7xx/74xx boards
2006-06-19 11:02:41 +02:00
pcnet.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
plb2800_eth.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
ps2mult.c
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2004-01-20 23:12:12 +00:00
ps2ser.c
More code cleanup
2006-07-21 15:24:56 +02:00
pxa_pcmcia.c
Major PCMCIA Cleanup to make code better readable and maintainable.
2006-07-10 23:07:28 +02:00
rpx_pcmcia.c
More code cleanup
2006-07-21 15:24:56 +02:00
rtl8019.c
* Patch by Xue Ligong (Joe), 13 Nov 2003:
2003-12-07 00:46:27 +00:00
rtl8019.h
* Cleanup lowboot code for MPC5200
2004-01-02 14:00:00 +00:00
rtl8139.c
Change Id to symbolic name for RTL8139
2006-06-28 08:43:56 -05:00
rtl8169.c
* Patch by Sangmoon Kim, 12 Apr 2004:
2004-04-18 22:03:42 +00:00
s3c4510b_eth.c
Code cleanup
2006-07-21 20:57:53 +02:00
s3c4510b_eth.h
* Code cleanup (ARM mostly)
2004-07-01 16:30:44 +00:00
s3c4510b_uart.c
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
s3c4510b_uart.h
* Code cleanup (ARM mostly)
2004-07-01 16:30:44 +00:00
sed156x.c
* Patches by Pantelis Antoniou, 30 Mar 2004:
2004-04-15 21:16:42 +00:00
sed13806.c
* Patch by Martin Krause, 03 Aug 2004:
2004-08-04 21:56:49 +00:00
serial_max3100.c
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
serial_pl010.c
* Patch by Andreas Engel, 12 Jul 2004:
2004-08-02 23:22:59 +00:00
serial_pl011.c
* Patch by Andreas Engel, 12 Jul 2004:
2004-08-02 23:22:59 +00:00
serial_pl011.h
Code cleanup; make several boards compile & link.
2004-03-14 22:25:36 +00:00
serial_xuartlite.c
Patches by Yasushi Shoji, 29 Jun 2004:
2004-07-10 23:48:41 +00:00
serial.c
Coding style cleanup
2006-10-09 00:42:01 +02:00
sl811_usb.c
Patch by Klaus Heydeck, 12 May 2004:
2004-05-12 22:54:36 +00:00
sl811.h
* Modify KUP4X board configuration to use SL811 driver for USB memory
2004-04-23 20:32:05 +00:00
sm501.c
Patches by Martin Krause, 22 Mar 2005:
2005-03-27 23:41:39 +00:00
smc91111.c
[patch] use unsigned char in smc91111 driver for mac
2007-05-05 21:27:38 +02:00
smc91111.h
Add ADI Blackfin support
2006-03-12 02:10:00 +01:00
smiLynxEM.c
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
status_led.c
* Patches by David Müller, 12 Jun 2003:
2003-06-19 23:01:32 +00:00
sym53c8xx.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
systemace.c
Minor code cleanup.
2007-02-27 14:26:04 +01:00
ti_pci1410a.c
Fix typo
2005-08-06 01:02:27 +02:00
tigon3.c
* Code cleanup:
2003-06-27 21:31:46 +00:00
tigon3.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
tqm8xx_pcmcia.c
More code cleanup
2006-07-21 15:24:56 +02:00
tsec.c
Coding stylke cleanup; update CHANGELOG.
2007-05-05 18:23:11 +02:00
tsec.h
Enable 8544 support
2007-04-23 19:58:28 -05:00
tsi108_eth.c
Clean up the code according to codestyle:
2006-12-01 11:47:36 +08:00
tsi108_i2c.c
Some code cleanup.
2007-03-04 01:36:05 +01:00
tsi108_pci.c
Clean up the code according to codestyle:
2006-12-01 11:47:36 +08:00
usbdcore_ep0.c
Add support for Siemens SX1 mobile phone;
2004-03-12 00:14:09 +00:00
usbdcore_omap1510.c
* Add start-up delay to make sure power has stabilized before
2004-03-23 20:18:25 +00:00
usbdcore.c
Add support for Siemens SX1 mobile phone;
2004-03-12 00:14:09 +00:00
usbtty.c
Code cleanup; make several boards compile & link.
2004-03-14 22:25:36 +00:00
usbtty.h
Add support for Siemens SX1 mobile phone;
2004-03-12 00:14:09 +00:00
videomodes.c
Code cleanup
2004-03-25 15:14:43 +00:00
videomodes.h
Code cleanup
2004-03-25 15:14:43 +00:00
w83c553f.c
Initial revision
2002-09-17 21:37:55 +00:00