/* * (C) Copyright 2006 * Texas Instruments. * Richard Woodruff * Syed Mohammed Khasim * * Configuration settings for the 3430 TI SDP3430 board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options */ #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP36XX 1 /* which is a 36XX */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_3630SDP 1 /* working with SDP */ #define CONFIG_OMAP3430 1 /* 3630 is similar to 3430 */ #define CONFIG_FASTBOOT 1 /* Using fastboot interface */ #define CONFIG_TWL4030_KEYPAD 1 /* Use the keypad */ #define CONFIG_TWL4030_USB 1 /* Initialize twl usb */ #include /* get chip and board defs */ /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK V_OSCK #define PRCM_CLK_CFG2_400MHZ 1 /* VDD2=1.2v - 200MHz DDR */ #define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */ /* PER clock options, only uncomment 1 */ /* Uncomment to run PER M2 at 2x 96MHz */ /* #define CONFIG_PER_M2_192 */ /* Uncomment to run PER SGX at 192MHz */ /*#define CONFIG_PER_SGX_192*/ /* Uncommend to run PER at 2x 96MHz */ #undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 /* * Size of malloc() pool */ #define CFG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) #define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ /* * Hardware drivers */ /* * NS16550 Configuration */ #define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE (-4) #define CFG_NS16550_CLK V_NS16550_CLK #define CFG_NS16550_COM1 OMAP34XX_UART1 /* * select serial console configuration */ #define CONFIG_SERIAL1 1 /* UART1 on SDP */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} #define CONFIG_MMC 1 #define CONFIG_DOS_PARTITION 1 #define NET_CMDS (CFG_CMD_DHCP|CFG_CMD_NFS|CFG_CMD_NET) /* Config CMD*/ #define CONFIG_COMMANDS \ ((CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | \ CFG_CMD_JFFS2 | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_ONENAND | \ CFG_CMD_NAND) & ~CFG_CMD_AUTOSCRIPT) #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include #if (CONFIG_COMMANDS & CFG_CMD_NET) /* SMC91c96 Etherent */ #define CONFIG_DRIVER_LAN91C96 #define CONFIG_LAN91C96_BASE (DEBUG_BASE) #define CONFIG_LAN91C96_EXT_PHY #endif #if (CONFIG_COMMANDS & CFG_CMD_I2C) #define CFG_I2C_SPEED 400 #define CFG_I2C_SLAVE 1 #define CFG_I2C_BUS 0 #define CFG_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 #endif /* * Board NAND Info. */ #define CFG_NAND_ADDR NAND_BASE /* physical address to access nand*/ #define CFG_NAND_BASE NAND_BASE /* physical address to access nand at CS0*/ #define CFG_NAND_WIDTH_16 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 /* To use the 256/512 byte s/w ecc define CFG_SW_ECC_(256/512) */ /* Use the 512 byte ROM CODE HW ecc */ #define CFG_HW_ECC_ROMCODE 1 #define NAND_ALLOW_ERASE_ALL #define ADDR_COLUMN 1 #define ADDR_PAGE 2 #define ADDR_COLUMN_PAGE 3 #define NAND_ChipID_UNKNOWN 0x00 #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 #define NAND_NO_RB 1 #define CFG_NAND_WP #define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x81c00000\0" \ "nandloadaddr=0x81000000\0" \ "console=ttyS3,115200n8\0" \ "mmcroot=/dev/mmcblk0p2\0" \ "nandroot=/dev/ram0\0" \ "mmcargs=setenv bootargs console=${console} " \ "root=${mmcroot} rootdelay=2\0" \ "nandargs=setenv bootargs console=${console} " \ "rootdelay=2\0" \ "loaduimage=fatload mmc 0:1 ${loadaddr} uImage\0"\ "mmcboot=echo Booting from mmc ...;" \ " run mmcargs;" \ " bootm ${loadaddr}\0" \ "nandboot=echo Booting from nand ...;" \ " nand unlock;" \ " nand read.i ${nandloadaddr}" \ " ${kernel_nand_offset}" \ " ${kernel_nand_size};" \ " run nandargs;" \ " bootm ${nandloadaddr}\0" \ "autoboot=if mmc init 0; then" \ " run loaduimage;" \ " run mmcboot;" \ " else run nandboot;" \ " fi;\0" #define CONFIG_BOOTCOMMAND "run autoboot" #ifdef NFS_BOOT_DEFAULTS #define CONFIG_BOOTARGS "mem=64M console=ttyS0,115200n8 noinitrd root=/dev/nfs"\ " rw nfsroot=128.247.77.158:/home/a0393553/wtbu/rootfs ip=dhcp" #else #define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=64M console=ttyS0,115200n8 "\ "initrd=0x81600000,16M ramdisk_size=16384 rootfstype=ext2 "\ "video=omap24xxfbout:rotatio=0 " #endif #define CONFIG_NETMASK 255.255.254.0 #define CONFIG_IPADDR 128.247.77.90 #define CONFIG_SERVERIP 128.247.77.158 #define CONFIG_BOOTFILE "uImage" #define CONFIG_AUTO_COMPLETE 1 /* * Miscellaneous configurable options */ #define V_PROMPT "OMAP36XX SDP # " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT V_PROMPT #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) #define CFG_MAXARGS 24 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ #define CFG_MEMTEST_END (OMAP34XX_SDRC_CS0+SZ_31M) #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ /* 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ #define V_PVT 7 #define CFG_TIMERBASE OMAP34XX_GPT2 #define CFG_PVT V_PVT /* 2^(pvt+1) */ #define CFG_HZ ((V_SCLK)/(2 << CFG_PVT)) /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ #endif /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* SDRAM Bank Allocation method */ /*#define SDRC_B_R_C 1 */ /*#define SDRC_B1_R_B0_C 1 */ #define SDRC_R_B_C 1 /*----------------------------------------------------------------------- * FLASH and environment organization */ /* **** PISMO SUPPORT *** */ /* Configure the PISMO */ /** REMOVE ME ***/ #define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M #define PISMO1_NOR_SIZE GPMC_SIZE_64M #define PISMO1_NAND_SIZE GPMC_SIZE_128M #define PISMO1_ONEN_SIZE GPMC_SIZE_128M #define DBG_MPDB_SIZE GPMC_SIZE_16M #define PISMO2_SIZE 0 #define CFG_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ #define CFG_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ #define PHYS_FLASH_SIZE_SDPV2 SZ_128M #define PHYS_FLASH_SIZE SZ_32M #define CFG_FLASH_BASE boot_flash_base #define PHYS_FLASH_SECT_SIZE boot_flash_sec /* Dummy declaration of flash banks to get compilation right */ #define CFG_FLASH_BANKS_LIST {0, 0} #define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at start of flash */ #define CFG_ONENAND_BASE ONENAND_MAP #define CFG_ENV_IS_IN_NAND 1 #define ENV_IS_VARIABLE 1 #define CFG_ENV_IS_IN_ONENAND 1 #define CFG_ENV_IS_IN_FLASH 1 #define ONENAND_ENV_OFFSET 0x1c0000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x1c0000 /* environment starts here */ #define CFG_ENV_SECT_SIZE boot_flash_sec #define CFG_ENV_OFFSET boot_flash_off #define CFG_ENV_ADDR boot_flash_env_addr /*----------------------------------------------------------------------- * CFI FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ #define CFG_FLASH_QUIET_TEST 1 /* Dont crib abt missing chips */ #define CFG_FLASH_CFI_WIDTH 0x02 /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ /* Flash banks JFFS2 should use */ #define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) #define CFG_JFFS2_MEM_NAND #define CFG_JFFS2_FIRST_BANK CFG_MAX_FLASH_BANKS /* use flash_info[2] */ #define CFG_JFFS2_NUM_BANKS 1 #define CONFIG_LED_INFO #define CONFIG_LED_LEN 16 #ifndef __ASSEMBLY__ extern unsigned int boot_flash_base; extern volatile unsigned int boot_flash_env_addr; extern unsigned int boot_flash_off; extern unsigned int boot_flash_sec; int get_boot_type(void); void v7_flush_dcache_all(int, int); void l2cache_enable(void); void setup_auxcr(int, int); int twl4030_init_battery_charging(void); #endif #define WRITE_NAND_COMMAND(d, adr) \ __raw_writew(d, (nand_cs_base + GPMC_NAND_CMD)) #define WRITE_NAND_ADDRESS(d, adr) \ __raw_writew(d, (nand_cs_base + GPMC_NAND_ADR)) #define WRITE_NAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_DAT)) #define READ_NAND(adr) __raw_readw((nand_cs_base + GPMC_NAND_DAT)) /* Other NAND Access APIs */ #define NAND_WP_OFF() \ do { *(volatile u32 *) (GPMC_CONFIG) |= 0x00000010; } while (0) #define NAND_WP_ON() \ do { *(volatile u32 *) (GPMC_CONFIG) &= ~0x00000010; } while (0) #define NAND_DISABLE_CE(nand) #define NAND_ENABLE_CE(nand) #define NAND_WAIT_READY(nand) udelay(10) /* Fastboot variables */ #define CFG_FASTBOOT_TRANSFER_BUFFER (PHYS_SDRAM_1 + SZ_16M) #define CFG_FASTBOOT_TRANSFER_BUFFER_SIZE (SZ_256M - SZ_16M) #define CFG_FASTBOOT_PREBOOT_KEYS 1 #define CFG_FASTBOOT_PREBOOT_KEY1 0x37 /* 'ok' */ #define CFG_FASTBOOT_PREBOOT_KEY2 0x00 /* unused */ #define CFG_FASTBOOT_PREBOOT_INITIAL_WAIT (0) #define CFG_FASTBOOT_PREBOOT_LOOP_MAXIMUM (1) #define CFG_FASTBOOT_PREBOOT_LOOP_WAIT (0) /* Yaffs variables */ #define CFG_NAND_YAFFS_WRITE /* Zoom2 Battery charging enable */ #define CFG_BATTERY_CHARGING /* Zoom2 Battery threshold */ #define CFG_LOW_BAT 3300 /* 3.3V */ #define CFG_BAT_CHG 4000 /* 4.0V */ /* Zoom2 charger tries */ #define CFG_CHARGER_TRIES_MAX 100 /* Command shell */ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /* Clock command */ #define CONFIG_CMD_CLOCK 1 #define CONFIG_CMD_CLOCK_INFO_CPU 1 /* Voltage command */ #define CONFIG_CMD_VOLTAGE 1 #endif /* __CONFIG_H */