Merge branch 'master' of /home/stefan/git/u-boot/u-boot

.gitignore

@@ -1,13 +1,41 @@
+#
+# NOTE! Don't add files that are generated in specific
+# subdirectories here. Add them in the ".gitignore" file
+# in that subdirectory instead.
+#
+# Normal rules
+#
+
+*.rej
 *.orig
 *.a
 *.o
-*.depend
+
-System.map
+#
+# Top-level generic files
+#
+
+/System.map
 /u-boot
 /u-boot.map
 /u-boot.bin
 /u-boot.srec
+
+#
+# Generated files
+#
+
+*.depend
 /LOG
 /errlog
 /reloc_off
 
+# stgit generated dirs
+patches-*
+
+# quilt's files
+patches
+series
+
+# cscope files
+cscope.*

CREDITS

@@ -303,6 +303,11 @@ D: Support for Nios Stratix Development Kit (DK-1S10)
 D: Support for SSV ADNP/ESC1 (Nios Cyclone)
 W: http://www.li-pro.net
 
+N: Dave Liu
+E: daveliu@freescale.com
+D: Support for MPC832x, MPC8360, MPC837x
+W: www.freescale.com
+
 N: Raymond Lo
 E: lo@routefree.com
 D: Support for DOS partitions

MAINTAINERS

@@ -146,7 +146,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	CPCI4052		PPC405GP
 	CPCI405AB		PPC405GP
 	CPCI405DT		PPC405GP
-	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
 	DP405			PPC405EP
@@ -159,6 +158,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	PCI405			PPC405GP
 	PLU405			PPC405EP
 	PMC405			PPC405GP
+	PMC440			PPC440EPx
 	VOH405			PPC405EP
 	VOM405			PPC405EP
 	WUH405			PPC405EP
@@ -190,6 +190,7 @@ Howard Gray <mvsensor@matrix-vision.de>
 
 Joe Hamman <joe.hamman@embeddedspecialties.com>
 
+	sbc8548			MPC8548
 	sbc8641d		MPC8641D
 
 Klaus Heydeck <heydeck@kieback-peter.de>
@@ -204,6 +205,10 @@ Murray Jensen <Murray.Jensen@csiro.au>
 	cogent_mpc8260		MPC8260
 	hymod			MPC8260
 
+Larry Johnson <lrj@acm.org>
+
+	korat			PPC440EPx
+
 Brad Kemp <Brad.Kemp@seranoa.com>
 
 	ppmc8260		MPC8260
@@ -217,13 +222,19 @@ Thomas Lange <thomas@corelatus.se>
 
 	GTH			MPC860
 
+Robert Lazarski <robertlazarski@gmail.com>
+
+	ATUM8548		MPC8548
+
 The LEOX team <team@leox.org>
 
 	ELPT860			MPC860T
 
 Dave Liu <daveliu@freescale.com>
 
+	MPC832XEMDS		MPC832x
 	MPC8360EMDS		MPC8360
+	MPC837XEMDS		MPC837x
 
 Nye Liu <nyet@zumanetworks.com>
 
@@ -303,8 +314,11 @@ Stefan Roese <sr@denx.de>
 	bamboo			PPC440EP
 	bunbinga		PPC405EP
 	ebony			PPC440GP
+	haleakala		PPC405EXr
 	katmai			PPC440SPe
+	kilauea			PPC405EX
 	lwmon5			PPC440EPx
+	makalu			PPC405EX
 	ocotea			PPC440GX
 	p3p440			PPC440GP
 	pcs440ep		PPC440EP
@@ -329,6 +343,17 @@ Travis Sawyer (travis.sawyer@sandburst.com>
 	METROBOX		PPC440GX
 	XPEDITE1K		PPC440GX
 
+Heiko Schocher <hs@denx.de>
+
+	ids8247			MPC8272
+	jupiter			MPC5200
+	mgcoge			MPC8247
+	mgsuvd			MPC852
+	municse			MPC5200
+	sc3			PPC405GP
+	uc101			MPC5200
+
+
 Peter De Schrijver <p2@mind.be>
 
 	ML2			PPC4xx
@@ -357,6 +382,10 @@ David Updegraff <dave@cray.com>
 
 	CRAYL1			PPC4xx
 
+Anton Vorontsov <avorontsov@ru.mvista.com>
+
+	MPC8360ERDK		MPC8360
+
 Josef Wagner <Wagner@Microsys.de>
 
 	CPC45			MPC8245

MAKEALL

@@ -46,6 +46,7 @@ LIST_5xxx="		\
 	mcc200		\
 	mecp5200	\
 	motionpro	\
+	munices		\
 	o2dnt		\
 	pf5200		\
 	PM520		\
@@ -107,6 +108,7 @@ LIST_8xx="		\
 	lwmon		\
 	MBX		\
 	MBX860T		\
+	mgsuvd		\
 	MHPC		\
 	MPC86xADS	\
 	MPC885ADS	\
@@ -135,6 +137,7 @@ LIST_8xx="		\
 	SPD823TS	\
 	svm_sc8xx	\
 	SXNI855T	\
+	TK885D		\
 	TOP860		\
 	TQM823L		\
 	TQM823L_LCD	\
@@ -168,7 +171,6 @@ LIST_4xx="		\
 	CPCI4052	\
 	CPCI405AB	\
 	CPCI405DT	\
-	CPCI440		\
 	CPCIISER4	\
 	CRAYL1		\
 	csb272		\
@@ -180,6 +182,8 @@ LIST_4xx="		\
 	ERIC		\
 	EXBITGEN	\
 	G2000		\
+	haleakala	\
+	haleakala_nand	\
 	hcu4		\
 	hcu5		\
 	HH405		\
@@ -187,8 +191,12 @@ LIST_4xx="		\
 	JSE		\
 	KAREF		\
 	katmai		\
+	kilauea		\
+	kilauea_nand	\
+	korat		\
 	luan		\
 	lwmon5		\
+	makalu		\
 	METROBOX	\
 	MIP405		\
 	MIP405T		\
@@ -203,6 +211,7 @@ LIST_4xx="		\
 	PIP405		\
 	PLU405		\
 	PMC405		\
+	PMC440		\
 	PPChameleonEVB	\
 	rainier		\
 	sbc405		\
@@ -274,6 +283,7 @@ LIST_8260="		\
 	hymod		\
 	IPHASE4539	\
 	ISPAN		\
+	mgcoge		\
 	MPC8260ADS	\
 	MPC8266ADS	\
 	MPC8272ADS	\
@@ -307,6 +317,9 @@ LIST_83xx="		\
 	MPC8349ITXGP	\
 	MPC8360EMDS	\
 	MPC8360EMDS_ATM	\
+	MPC8360ERDK_33	\
+	MPC8360ERDK_66	\
+	MPC837XEMDS	\
 	sbc8349		\
 	TQM834x		\
 "
@@ -317,6 +330,7 @@ LIST_83xx="		\
 #########################################################################
 
 LIST_85xx="		\
+	ATUM8548	\
 	MPC8540ADS	\
 	MPC8540EVAL	\
 	MPC8541CDS	\
@@ -328,6 +342,7 @@ LIST_85xx="		\
 	PM854		\
 	PM856		\
 	sbc8540		\
+	sbc8548		\
 	sbc8560		\
 	stxgp3		\
 	stxssa		\
@@ -342,6 +357,7 @@ LIST_85xx="		\
 #########################################################################
 
 LIST_86xx="		\
+	MPC8610HPCD	\
 	MPC8641HPCN	\
 	sbc8641d	\
 "
@@ -477,6 +493,7 @@ LIST_ARM10="		\
 LIST_ARM11="		\
 	cp1136		\
 	omap2420h4	\
+	apollon		\
 "
 
 #########################################################################

README

@@ -924,7 +924,7 @@ The following options need to be configured:
 		(i.e. setenv videomode 317; saveenv; reset;)
 
 		- "videomode=bootargs" all the video parameters are parsed
-		from the bootargs. (See drivers/videomodes.c)
+		from the bootargs. (See drivers/video/videomodes.c)
 
 
 		CONFIG_VIDEO_SED13806
@@ -1353,7 +1353,7 @@ The following options need to be configured:
 		CONFIG_FSL_I2C
 
 		Define this option if you want to use Freescale's I2C driver in
-		drivers/fsl_i2c.c.
+		drivers/i2c/fsl_i2c.c.
 
 
 - SPI Support:	CONFIG_SPI
@@ -1377,15 +1377,24 @@ The following options need to be configured:
 		SPI configuration items (port pins to use, etc). For
 		an example, see include/configs/sacsng.h.
 
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA
+
+		Enables FPGA subsystem.
+
+		CONFIG_FPGA_<vendor>
+
+		Enables support for specific chip vendors.
+		(ALTERA, XILINX)
+
+		CONFIG_FPGA_<family>
+
+		Enables support for FPGA family.
+		(SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
+
+		CONFIG_FPGA_COUNT
 
 		Specify the number of FPGA devices to support.
 
-		CONFIG_FPGA
-
-		Used to specify the types of FPGA devices.  For example,
-		#define CONFIG_FPGA  CFG_XILINX_VIRTEX2
-
 		CFG_FPGA_PROG_FEEDBACK
 
 		Enable printing of hash marks during FPGA configuration.
@@ -2269,6 +2278,10 @@ Low Level (hardware related) configuration options:
 		enable I2C microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [DSP2]
 
+- CFG_SMC_UCODE_PATCH, CFG_SMC_DPMEM_OFFSET [0x1FC0]:
+		enable SMC microcode relocation patch (MPC8xx);
+		define relocation offset in DPRAM [SMC1]
+
 - CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]:
 		enable SPI microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [SCC4]

api/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2007 Semihalf
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)libapi.a
+
+COBJS	= api.o api_net.o api_storage.o api_platform-$(ARCH).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend

api/README

@@ -0,0 +1,55 @@
+U-Boot machine/arch independent API for external apps
+=====================================================
+
+1.  Main assumptions
+
+  - there is a single entry point (syscall) to the API
+
+  - per current design the syscall is a C-callable function in the U-Boot
+    text, which might evolve into a real syscall using machine exception trap
+    once this initial version proves functional
+
+  - the consumer app is responsible for producing appropriate context (call
+    number and arguments)
+
+  - upon entry, the syscall dispatches the call to other (existing) U-Boot
+    functional areas like networking or storage operations
+
+  - consumer application will recognize the API is available by searching
+    a specified (assumed by convention) range of address space for the
+    signature
+
+  - the U-Boot integral part of the API is meant to be thin and non-intrusive,
+    leaving as much processing as possible on the consumer application side,
+    for example it doesn't keep states, but relies on hints from the app and
+    so on
+
+  - optional (CONFIG_API)
+
+
+2. Calls
+
+  - console related (getc, putc, tstc etc.)
+  - system (reset, platform info)
+  - time (delay, current)
+  - env vars (enumerate all, get, set)
+  - devices (enumerate all, open, close, read, write); currently two classes
+    of devices are recognized and supported: network and storage (ide, scsi,
+    usb etc.)
+
+
+3. Structure overview
+
+  - core API, integral part of U-Boot, mandatory
+    - implements the single entry point (mimics UNIX syscall)
+
+  - glue
+    - entry point at the consumer side, allows to make syscall, mandatory
+      part
+
+    - helper conveniency wrappers so that consumer app does not have to use
+      the syscall directly, but in a more friendly manner (a la libc calls),
+      optional part
+
+  - consumer application
+    - calls directly, or leverages the provided glue mid-layer

api/api.c

@@ -0,0 +1,670 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_API)
+
+#include <command.h>
+#include <common.h>
+#include <malloc.h>
+#include <linux/types.h>
+#include <api_public.h>
+
+#include "api_private.h"
+
+#define DEBUG
+#undef DEBUG
+
+/* U-Boot routines needed */
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern uchar (*env_get_char)(int);
+extern uchar *env_get_addr(int);
+
+/*****************************************************************************
+ *
+ * This is the API core.
+ *
+ * API_ functions are part of U-Boot code and constitute the lowest level
+ * calls:
+ *
+ *  - they know what values they need as arguments
+ *  - their direct return value pertains to the API_ "shell" itself (0 on
+ *    success, some error code otherwise)
+ *  - if the call returns a value it is buried within arguments
+ *
+ ****************************************************************************/
+
+#ifdef DEBUG
+#define debugf(fmt, args...) do { printf("%s(): ", __func__); printf(fmt, ##args); } while (0)
+#else
+#define debugf(fmt, args...)
+#endif
+
+typedef	int (*cfp_t)(va_list argp);
+
+static int calls_no;
+
+/*
+ * pseudo signature:
+ *
+ * int API_getc(int *c)
+ */
+static int API_getc(va_list ap)
+{
+	int *c;
+
+	if ((c = (int *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	*c = getc();
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_tstc(int *c)
+ */
+static int API_tstc(va_list ap)
+{
+	int *t;
+
+	if ((t = (int *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	*t = tstc();
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_putc(char *ch)
+ */
+static int API_putc(va_list ap)
+{
+	char *c;
+
+	if ((c = (char *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	putc(*c);
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_puts(char **s)
+ */
+static int API_puts(va_list ap)
+{
+	char *s;
+
+	if ((s = (char *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	puts(s);
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_reset(void)
+ */
+static int API_reset(va_list ap)
+{
+	do_reset(NULL, 0, 0, NULL);
+
+	/* NOT REACHED */
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_get_sys_info(struct sys_info *si)
+ *
+ * fill out the sys_info struct containing selected parameters about the
+ * machine
+ */
+static int API_get_sys_info(va_list ap)
+{
+	struct sys_info *si;
+
+	si = (struct sys_info *)va_arg(ap, u_int32_t);
+	if (si == NULL)
+		return API_ENOMEM;
+
+	return (platform_sys_info(si)) ? 0 : API_ENODEV;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_udelay(unsigned long *udelay)
+ */
+static int API_udelay(va_list ap)
+{
+	unsigned long *d;
+
+	if ((d = (unsigned long *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	udelay(*d);
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_get_timer(unsigned long *current, unsigned long *base)
+ */
+static int API_get_timer(va_list ap)
+{
+	unsigned long *base, *cur;
+
+	cur = (unsigned long *)va_arg(ap, u_int32_t);
+	if (cur == NULL)
+		return API_EINVAL;
+
+	base = (unsigned long *)va_arg(ap, u_int32_t);
+	if (base == NULL)
+		return API_EINVAL;
+
+	*cur = get_timer(*base);
+	return 0;
+}
+
+
+/*****************************************************************************
+ *
+ * pseudo signature:
+ *
+ * int API_dev_enum(struct device_info *)
+ *
+ *
+ * cookies uniqely identify the previously enumerated device instance and
+ * provide a hint for what to inspect in current enum iteration:
+ *
+ *   - net: &eth_device struct address from list pointed to by eth_devices
+ *
+ *   - storage: block_dev_desc_t struct address from &ide_dev_desc[n],
+ *     &scsi_dev_desc[n] and similar tables
+ *
+ ****************************************************************************/
+
+static int API_dev_enum(va_list ap)
+{
+	struct device_info *di;
+
+	/* arg is ptr to the device_info struct we are going to fill out */
+	di = (struct device_info *)va_arg(ap, u_int32_t);
+	if (di == NULL)
+		return API_EINVAL;
+
+	if (di->cookie == NULL) {
+		/* start over - clean up enumeration */
+		dev_enum_reset();	/* XXX shouldn't the name contain 'stor'? */
+		debugf("RESTART ENUM\n");
+
+		/* net device enumeration first */
+		if (dev_enum_net(di))
+			return 0;
+	}
+
+	/*
+	 * The hidden assumption is there can only be one active network
+	 * device and it is identified upon enumeration (re)start, so there's
+	 * no point in trying to find network devices in other cases than the
+	 * (re)start and hence the 'next' device can only be storage
+	 */
+	if (!dev_enum_storage(di))
+		/* make sure we mark there are no more devices */
+		di->cookie = NULL;
+
+	return 0;
+}
+
+
+static int API_dev_open(va_list ap)
+{
+	struct device_info *di;
+	int err = 0;
+
+	/* arg is ptr to the device_info struct */
+	di = (struct device_info *)va_arg(ap, u_int32_t);
+	if (di == NULL)
+		return API_EINVAL;
+
+	/* Allow only one consumer of the device at a time */
+	if (di->state == DEV_STA_OPEN)
+		return API_EBUSY;
+
+	if (di->cookie == NULL)
+		return API_ENODEV;
+
+	if (di->type & DEV_TYP_STOR)
+		err = dev_open_stor(di->cookie);
+
+	else if (di->type & DEV_TYP_NET)
+		err = dev_open_net(di->cookie);
+	else
+		err = API_ENODEV;
+
+	if (!err)
+		di->state = DEV_STA_OPEN;
+
+	return err;
+}
+
+
+static int API_dev_close(va_list ap)
+{
+	struct device_info *di;
+	int err = 0;
+
+	/* arg is ptr to the device_info struct */
+	di = (struct device_info *)va_arg(ap, u_int32_t);
+	if (di == NULL)
+		return API_EINVAL;
+
+	if (di->state == DEV_STA_CLOSED)
+		return 0;
+
+	if (di->cookie == NULL)
+		return API_ENODEV;
+
+	if (di->type & DEV_TYP_STOR)
+		err = dev_close_stor(di->cookie);
+
+	else if (di->type & DEV_TYP_NET)
+		err = dev_close_net(di->cookie);
+	else
+		/*
+		 * In case of unknown device we cannot change its state, so
+		 * only return error code
+		 */
+		err = API_ENODEV;
+
+	if (!err)
+		di->state = DEV_STA_CLOSED;
+
+	return err;
+}
+
+
+/*
+ * Notice: this is for sending network packets only, as U-Boot does not
+ * support writing to storage at the moment (12.2007)
+ *
+ * pseudo signature:
+ *
+ * int API_dev_write(
+ *	struct device_info *di,
+ *	void *buf,
+ *	int *len
+ * )
+ *
+ * buf:	ptr to buffer from where to get the data to send
+ *
+ * len: length of packet to be sent (in bytes)
+ *
+ */
+static int API_dev_write(va_list ap)
+{
+	struct device_info *di;
+	void *buf;
+	int *len;
+	int err = 0;
+
+	/* 1. arg is ptr to the device_info struct */
+	di = (struct device_info *)va_arg(ap, u_int32_t);
+	if (di == NULL)
+		return API_EINVAL;
+
+	/* XXX should we check if device is open? i.e. the ->state ? */
+
+	if (di->cookie == NULL)
+		return API_ENODEV;
+
+	/* 2. arg is ptr to buffer from where to get data to write */
+	buf = (void *)va_arg(ap, u_int32_t);
+	if (buf == NULL)
+		return API_EINVAL;
+
+	/* 3. arg is length of buffer */
+	len = (int *)va_arg(ap, u_int32_t);
+	if (len == NULL)
+		return API_EINVAL;
+	if (*len <= 0)
+		return API_EINVAL;
+
+	if (di->type & DEV_TYP_STOR)
+		/*
+		 * write to storage is currently not supported by U-Boot:
+		 * no storage device implements block_write() method
+		 */
+		return API_ENODEV;
+
+	else if (di->type & DEV_TYP_NET)
+		err = dev_write_net(di->cookie, buf, *len);
+	else
+		err = API_ENODEV;
+
+	return err;
+}
+
+
+/*
+ * pseudo signature:
+ *
+ * int API_dev_read(
+ *	struct device_info *di,
+ *	void *buf,
+ *	size_t *len,
+ *	unsigned long *start
+ *	size_t *act_len
+ * )
+ *
+ * buf:	ptr to buffer where to put the read data
+ *
+ * len: ptr to length to be read
+ *      - network: len of packet to read (in bytes)
+ *      - storage: # of blocks to read (can vary in size depending on define)
+ *
+ * start: ptr to start block (only used for storage devices, ignored for
+ *        network)
+ *
+ * act_len: ptr to where to put the len actually read
+ */
+static int API_dev_read(va_list ap)
+{
+	struct device_info *di;
+	void *buf;
+	lbasize_t *len_stor, *act_len_stor;
+	lbastart_t *start;
+	int *len_net, *act_len_net;
+
+	/* 1. arg is ptr to the device_info struct */
+	di = (struct device_info *)va_arg(ap, u_int32_t);
+	if (di == NULL)
+		return API_EINVAL;
+
+	/* XXX should we check if device is open? i.e. the ->state ? */
+
+	if (di->cookie == NULL)
+		return API_ENODEV;
+
+	/* 2. arg is ptr to buffer from where to put the read data */
+	buf = (void *)va_arg(ap, u_int32_t);
+	if (buf == NULL)
+		return API_EINVAL;
+
+	if (di->type & DEV_TYP_STOR) {
+		/* 3. arg - ptr to var with # of blocks to read */
+		len_stor = (lbasize_t *)va_arg(ap, u_int32_t);
+		if (!len_stor)
+			return API_EINVAL;
+		if (*len_stor <= 0)
+			return API_EINVAL;
+
+		/* 4. arg - ptr to var with start block */
+		start = (lbastart_t *)va_arg(ap, u_int32_t);
+
+		/* 5. arg - ptr to var where to put the len actually read */
+		act_len_stor = (lbasize_t *)va_arg(ap, u_int32_t);
+		if (!act_len_stor)
+			return API_EINVAL;
+
+		*act_len_stor = dev_read_stor(di->cookie, buf, *len_stor, *start);
+
+	} else if (di->type & DEV_TYP_NET) {
+
+		/* 3. arg points to the var with length of packet to read */
+		len_net = (int *)va_arg(ap, u_int32_t);
+		if (!len_net)
+			return API_EINVAL;
+		if (*len_net <= 0)
+			return API_EINVAL;
+
+		/* 4. - ptr to var where to put the len actually read */
+		act_len_net = (int *)va_arg(ap, u_int32_t);
+		if (!act_len_net)
+			return API_EINVAL;
+
+		*act_len_net = dev_read_net(di->cookie, buf, *len_net);
+
+	} else
+		return API_ENODEV;
+
+	return 0;
+}
+
+
+/*
+ * pseudo signature:
+ *
+ * int API_env_get(const char *name, char **value)
+ *
+ * name: ptr to name of env var
+ */
+static int API_env_get(va_list ap)
+{
+	char *name, **value;
+
+	if ((name = (char *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+	if ((value = (char **)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	*value = getenv(name);
+
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_env_set(const char *name, const char *value)
+ *
+ * name: ptr to name of env var
+ *
+ * value: ptr to value to be set
+ */
+static int API_env_set(va_list ap)
+{
+	char *name, *value;
+
+	if ((name = (char *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+	if ((value = (char *)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	setenv(name, value);
+
+	return 0;
+}
+
+/*
+ * pseudo signature:
+ *
+ * int API_env_enum(const char *last, char **next)
+ *
+ * last: ptr to name of env var found in last iteration
+ */
+static int API_env_enum(va_list ap)
+{
+	int i, n;
+	char *last, **next;
+
+	last = (char *)va_arg(ap, u_int32_t);
+
+	if ((next = (char **)va_arg(ap, u_int32_t)) == NULL)
+		return API_EINVAL;
+
+	if (last == NULL)
+		/* start over */
+		*next = ((char *)env_get_addr(0));
+	else {
+		*next = last;
+
+		for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
+			for (n = i; env_get_char(n) != '\0'; ++n) {
+				if (n >= CFG_ENV_SIZE) {
+					/* XXX shouldn't we set *next = NULL?? */
+					return 0;
+				}
+			}
+
+			if (envmatch((uchar *)last, i) < 0)
+				continue;
+
+			/* try to get next name */
+			i = n + 1;
+			if (env_get_char(i) == '\0') {
+				/* no more left */
+				*next = NULL;
+				return 0;
+			}
+
+			*next = ((char *)env_get_addr(i));
+			return 0;
+		}
+	}
+
+	return 0;
+}
+
+static cfp_t calls_table[API_MAXCALL] = { NULL, };
+
+/*
+ * The main syscall entry point - this is not reentrant, only one call is
+ * serviced until finished.
+ *
+ * e.g. syscall(1, int *, u_int32_t, u_int32_t, u_int32_t, u_int32_t);
+ *
+ * call:	syscall number
+ *
+ * retval:	points to the return value placeholder, this is the place the
+ *		syscall puts its return value, if NULL the caller does not
+ *		expect a return value
+ *
+ * ...		syscall arguments (variable number)
+ *
+ * returns:	0 if the call not found, 1 if serviced
+ */
+int syscall(int call, int *retval, ...)
+{
+	va_list	ap;
+	int rv;
+
+	if (call < 0 || call >= calls_no || calls_table[call] == NULL) {
+		debugf("invalid call #%d\n", call);
+		return 0;
+	}
+
+	if (calls_table[call] == NULL) {
+		debugf("syscall #%d does not have a handler\n", call);
+		return 0;
+	}
+
+	va_start(ap, retval);
+	rv = calls_table[call](ap);
+	if (retval != NULL)
+		*retval = rv;
+
+	return 1;
+}
+
+void api_init(void)
+{
+	struct api_signature *sig = NULL;
+
+	/* TODO put this into linker set one day... */
+	calls_table[API_RSVD] = NULL;
+	calls_table[API_GETC] = &API_getc;
+	calls_table[API_PUTC] = &API_putc;
+	calls_table[API_TSTC] = &API_tstc;
+	calls_table[API_PUTS] = &API_puts;
+	calls_table[API_RESET] = &API_reset;
+	calls_table[API_GET_SYS_INFO] = &API_get_sys_info;
+	calls_table[API_UDELAY] = &API_udelay;
+	calls_table[API_GET_TIMER] = &API_get_timer;
+	calls_table[API_DEV_ENUM] = &API_dev_enum;
+	calls_table[API_DEV_OPEN] = &API_dev_open;
+	calls_table[API_DEV_CLOSE] = &API_dev_close;
+	calls_table[API_DEV_READ] = &API_dev_read;
+	calls_table[API_DEV_WRITE] = &API_dev_write;
+	calls_table[API_ENV_GET] = &API_env_get;
+	calls_table[API_ENV_SET] = &API_env_set;
+	calls_table[API_ENV_ENUM] = &API_env_enum;
+	calls_no = API_MAXCALL;
+
+	debugf("API initialized with %d calls\n", calls_no);
+
+	dev_stor_init();
+
+	/*
+	 * Produce the signature so the API consumers can find it
+	 */
+	sig = malloc(sizeof(struct api_signature));
+	if (sig == NULL) {
+		printf("API: could not allocate memory for the signature!\n");
+		return;
+	}
+
+	debugf("API sig @ 0x%08x\n", sig);
+	memcpy(sig->magic, API_SIG_MAGIC, 8);
+	sig->version = API_SIG_VERSION;
+	sig->syscall = &syscall;
+	sig->checksum = 0;
+	sig->checksum = crc32(0, (unsigned char *)sig,
+			      sizeof(struct api_signature));
+	debugf("syscall entry: 0x%08x\n", sig->syscall);
+}
+
+void platform_set_mr(struct sys_info *si, unsigned long start, unsigned long size,
+			int flags)
+{
+	int i;
+
+	if (!si->mr || !size || (flags == 0))
+		return;
+
+	/* find free slot */
+	for (i = 0; i < si->mr_no; i++)
+		if (si->mr[i].flags == 0) {
+			/* insert new mem region */
+			si->mr[i].start = start;
+			si->mr[i].size = size;
+			si->mr[i].flags = flags;
+			return;
+		}
+}
+
+#endif /* CONFIG_API */

api/api_net.c

@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_API)
+
+#include <common.h>
+#include <net.h>
+#include <linux/types.h>
+#include <api_public.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEBUG
+#undef DEBUG
+
+#if !defined(CONFIG_NET_MULTI)
+#error "API/net is currently only available for platforms with CONFIG_NET_MULTI"
+#endif
+
+#ifdef DEBUG
+#define debugf(fmt, args...) do { printf("%s(): ", __func__); printf(fmt, ##args); } while (0)
+#else
+#define debugf(fmt, args...)
+#endif
+
+#define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)
+
+
+static int dev_valid_net(void *cookie)
+{
+	return ((void *)eth_get_dev() == cookie) ? 1 : 0;
+}
+
+int dev_open_net(void *cookie)
+{
+	if (!dev_valid_net(cookie))
+		return API_ENODEV;
+
+	if (eth_init(gd->bd) < 0)
+		return API_EIO;
+
+	return 0;
+}
+
+int dev_close_net(void *cookie)
+{
+	if (!dev_valid_net(cookie))
+		return API_ENODEV;
+
+	eth_halt();
+	return 0;
+}
+
+/*
+ * There can only be one active eth interface at a time - use what is
+ * currently set to eth_current
+ */
+int dev_enum_net(struct device_info *di)
+{
+	struct eth_device *eth_current = eth_get_dev();
+
+	di->type = DEV_TYP_NET;
+	di->cookie = (void *)eth_current;
+	if (di->cookie == NULL)
+		return 0;
+
+	memcpy(di->di_net.hwaddr, eth_current->enetaddr, 6);
+
+	debugf("device found, returning cookie 0x%08x\n",
+		(u_int32_t)di->cookie);
+
+	return 1;
+}
+
+int dev_write_net(void *cookie, void *buf, int len)
+{
+	/* XXX verify that cookie points to a valid net device??? */
+
+	return eth_send(buf, len);
+}
+
+int dev_read_net(void *cookie, void *buf, int len)
+{
+	/* XXX verify that cookie points to a valid net device??? */
+
+	return eth_receive(buf, len);
+}
+
+#endif /* CONFIG_API */

api/api_platform-arm.c

@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * This file contains routines that fetch data from ARM-dependent sources
+ * (bd_info etc.)
+ *
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_API)
+
+#include <linux/types.h>
+#include <api_public.h>
+
+#include <asm/u-boot.h>
+#include <asm/global_data.h>
+
+#include "api_private.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Important notice: handling of individual fields MUST be kept in sync with
+ * include/asm-arm/u-boot.h and include/asm-arm/global_data.h, so any changes
+ * need to reflect their current state and layout of structures involved!
+ */
+int platform_sys_info(struct sys_info *si)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		platform_set_mr(si, gd->bd->bi_dram[i].start,
+				gd->bd->bi_dram[i].size, MR_ATTR_DRAM);
+
+	return 1;
+}
+
+#endif /* CONFIG_API */

api/api_platform-ppc.c

@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * This file contains routines that fetch data from PowerPC-dependent sources
+ * (bd_info etc.)
+ *
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_API)
+
+#include <linux/types.h>
+#include <api_public.h>
+
+#include <asm/u-boot.h>
+#include <asm/global_data.h>
+
+#include "api_private.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Important notice: handling of individual fields MUST be kept in sync with
+ * include/asm-ppc/u-boot.h and include/asm-ppc/global_data.h, so any changes
+ * need to reflect their current state and layout of structures involved!
+ */
+int platform_sys_info(struct sys_info *si)
+{
+	si->clk_bus = gd->bus_clk;
+	si->clk_cpu = gd->cpu_clk;
+
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) || \
+    defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#define bi_bar	bi_immr_base
+#elif defined(CONFIG_MPC5xxx)
+#define bi_bar	bi_mbar_base
+#elif defined(CONFIG_MPC83XX)
+#define bi_bar	bi_immrbar
+#elif defined(CONFIG_MPC8220)
+#define bi_bar	bi_mbar_base
+#endif
+
+#if defined(bi_bar)
+	si->bar = gd->bd->bi_bar;
+#undef bi_bar
+#else
+	si->bar = NULL;
+#endif
+
+	platform_set_mr(si, gd->bd->bi_memstart, gd->bd->bi_memsize, MR_ATTR_DRAM);
+	platform_set_mr(si, gd->bd->bi_flashstart, gd->bd->bi_flashsize, MR_ATTR_FLASH);
+	platform_set_mr(si, gd->bd->bi_sramstart, gd->bd->bi_sramsize, MR_ATTR_SRAM);
+
+	return 1;
+}
+
+#endif /* CONFIG_API */

api/api_private.h

@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _API_PRIVATE_H_
+#define _API_PRIVATE_H_
+
+void	api_init(void);
+void	platform_set_mr(struct sys_info *, unsigned long, unsigned long, int);
+int	platform_sys_info(struct sys_info *);
+
+void	dev_enum_reset(void);
+int	dev_enum_storage(struct device_info *);
+int	dev_enum_net(struct device_info *);
+
+int	dev_open_stor(void *);
+int	dev_open_net(void *);
+int	dev_close_stor(void *);
+int	dev_close_net(void *);
+
+lbasize_t	dev_read_stor(void *, void *, lbasize_t, lbastart_t);
+int		dev_read_net(void *, void *, int);
+int		dev_write_net(void *, void *, int);
+
+void dev_stor_init(void);
+
+#endif /* _API_PRIVATE_H_ */

api/api_storage.c

@@ -0,0 +1,370 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_API)
+
+#include <common.h>
+#include <api_public.h>
+
+#define DEBUG
+#undef DEBUG
+
+#ifdef DEBUG
+#define debugf(fmt, args...) do { printf("%s(): ", __func__); printf(fmt, ##args); } while (0)
+#else
+#define debugf(fmt, args...)
+#endif
+
+#define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)
+
+
+#define ENUM_IDE	0
+#define ENUM_USB	1
+#define ENUM_SCSI	2
+#define ENUM_MMC	3
+#define ENUM_MAX	4
+
+struct stor_spec {
+	int		max_dev;
+	int		enum_started;
+	int		enum_ended;
+	int		type;		/* "external" type: DT_STOR_{IDE,USB,etc} */
+	char		name[4];
+};
+
+static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, };
+
+
+void dev_stor_init(void)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+	specs[ENUM_IDE].max_dev = CFG_IDE_MAXDEVICE;
+	specs[ENUM_IDE].enum_started = 0;
+	specs[ENUM_IDE].enum_ended = 0;
+	specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
+	specs[ENUM_IDE].name = "ide";
+#endif
+#if (CONFIG_COMMANDS & CFG_CMD_USB)
+	specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
+	specs[ENUM_USB].enum_started = 0;
+	specs[ENUM_USB].enum_ended = 0;
+	specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
+	specs[ENUM_USB].name = "usb";
+#endif
+#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+	specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
+	specs[ENUM_SCSI].enum_started = 0;
+	specs[ENUM_SCSI].enum_ended = 0;
+	specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
+	specs[ENUM_SCSI].name = "scsi";
+#endif
+}
+
+/*
+ * Finds next available device in the storage group
+ *
+ * type:	storage group type - ENUM_IDE, ENUM_SCSI etc.
+ *
+ * first:	if 1 the first device in the storage group is returned (if
+ *              exists), if 0 the next available device is searched
+ *
+ * more:	returns 0/1 depending if there are more devices in this group
+ *		available (for future iterations)
+ *
+ * returns:	0/1 depending if device found in this iteration
+ */
+static int dev_stor_get(int type, int first, int *more, struct device_info *di)
+{
+	int found = 0;
+	*more = 0;
+
+	int i;
+
+	block_dev_desc_t *dd;
+
+	if (first) {
+		di->cookie = (void *)get_dev(specs[type].name, 0);
+		found = 1;
+
+	} else {
+		for (i = 0; i < specs[type].max_dev; i++)
+			if (di->cookie == (void *)get_dev(specs[type].name, i)) {
+				/* previous cookie found -- advance to the
+				 * next device, if possible */
+
+				if (++i >= specs[type].max_dev) {
+					/* out of range, no more to enum */
+					di->cookie = NULL;
+					break;
+				}
+
+				di->cookie = (void *)get_dev(specs[type].name, i);
+				found = 1;
+
+				/* provide hint if there are more devices in
+				 * this group to enumerate */
+				if ((i + 1) < specs[type].max_dev)
+					*more = 1;
+
+				break;
+			}
+	}
+
+	if (found) {
+		di->type = specs[type].type;
+
+		if (di->cookie != NULL) {
+			dd = (block_dev_desc_t *)di->cookie;
+			if (dd->type == DEV_TYPE_UNKNOWN) {
+				debugf("device instance exists, but is not active..");
+				found = 0;
+			} else {
+				di->di_stor.block_count = dd->lba;
+				di->di_stor.block_size = dd->blksz;
+			}
+		}
+
+	} else
+		di->cookie = NULL;
+
+	return found;
+}
+
+
+/*
+ * returns:	ENUM_IDE, ENUM_USB etc. based on block_dev_desc_t
+ */
+static int dev_stor_type(block_dev_desc_t *dd)
+{
+	int i, j;
+
+	for (i = ENUM_IDE; i < ENUM_MAX; i++)
+		for (j = 0; j < specs[i].max_dev; j++)
+			if (dd == get_dev(specs[i].name, j))
+				return i;
+
+	return ENUM_MAX;
+}
+
+
+/*
+ * returns:	0/1 whether cookie points to some device in this group
+ */
+static int dev_is_stor(int type, struct device_info *di)
+{
+	return (dev_stor_type(di->cookie) == type) ? 1 : 0;
+}
+
+
+static int dev_enum_stor(int type, struct device_info *di)
+{
+	int found = 0, more = 0;
+
+	debugf("called, type %d\n", type);
+
+	/*
+	 * Formulae for enumerating storage devices:
+	 * 1. if cookie (hint from previous enum call) is NULL we start again
+	 *    with enumeration, so return the first available device, done.
+	 *
+	 * 2. if cookie is not NULL, check if it identifies some device in
+	 *    this group:
+	 *
+	 * 2a. if cookie is a storage device from our group (IDE, USB etc.),
+	 *     return next available (if exists) in this group
+	 *
+	 * 2b. if it isn't device from our group, check if such devices were
+	 *     ever enumerated before:
+	 *     - if not, return the first available device from this group
+	 *     - else return 0
+	 */
+
+	if (di->cookie == NULL) {
+
+		debugf("group%d - enum restart\n", type);
+
+		/*
+		 * 1. Enumeration (re-)started: take the first available
+		 * device, if exists
+		 */
+		found = dev_stor_get(type, 1, &more, di);
+		specs[type].enum_started = 1;
+
+	} else if (dev_is_stor(type, di)) {
+
+		debugf("group%d - enum continued for the next device\n", type);
+
+		if (specs[type].enum_ended) {
+			debugf("group%d - nothing more to enum!\n", type);
+			return 0;
+		}
+
+		/* 2a. Attempt to take a next available device in the group */
+		found = dev_stor_get(type, 0, &more, di);
+
+	} else {
+
+		if (specs[type].enum_ended) {
+			debugf("group %d - already enumerated, skipping\n", type);
+			return 0;
+		}
+
+		debugf("group%d - first time enum\n", type);
+
+		if (specs[type].enum_started == 0) {
+			/*
+			 * 2b.  If enumerating devices in this group did not
+			 * happen before, it means the cookie pointed to a
+			 * device frome some other group (another storage
+			 * group, or network); in this case try to take the
+			 * first available device from our group
+			 */
+			specs[type].enum_started = 1;
+
+			/*
+			 * Attempt to take the first device in this group:
+			 *'first element' flag is set
+			 */
+			found = dev_stor_get(type, 1, &more, di);
+
+		} else {
+			errf("group%d - out of order iteration\n", type);
+			found = 0;
+			more = 0;
+		}
+	}
+
+	/*
+	 * If there are no more devices in this group, consider its
+	 * enumeration finished
+	 */
+	specs[type].enum_ended = (!more) ? 1 : 0;
+
+	if (found)
+		debugf("device found, returning cookie 0x%08x\n",
+			(u_int32_t)di->cookie);
+	else
+		debugf("no device found\n");
+
+	return found;
+}
+
+void dev_enum_reset(void)
+{
+	int i;
+
+	for (i = 0; i < ENUM_MAX; i ++) {
+		specs[i].enum_started = 0;
+		specs[i].enum_ended = 0;
+	}
+}
+
+int dev_enum_storage(struct device_info *di)
+{
+	int i;
+
+	/*
+	 * check: ide, usb, scsi, mmc
+	 */
+	for (i = ENUM_IDE; i < ENUM_MAX; i ++) {
+		if (dev_enum_stor(i, di))
+			return 1;
+	}
+
+	return 0;
+}
+
+static int dev_stor_is_valid(int type, block_dev_desc_t *dd)
+{
+	int i;
+
+	for (i = 0; i < specs[type].max_dev; i++)
+		if (dd == get_dev(specs[type].name, i))
+			if (dd->type != DEV_TYPE_UNKNOWN)
+				return 1;
+
+	return 0;
+}
+
+
+int dev_open_stor(void *cookie)
+{
+	int type = dev_stor_type(cookie);
+
+	if (type == ENUM_MAX)
+		return API_ENODEV;
+
+	if (dev_stor_is_valid(type, (block_dev_desc_t *)cookie))
+		return 0;
+
+	return API_ENODEV;
+}
+
+
+int dev_close_stor(void *cookie)
+{
+	/*
+	 * Not much to do as we actually do not alter storage devices upon
+	 * close
+	 */
+	return 0;
+}
+
+
+static int dev_stor_index(block_dev_desc_t *dd)
+{
+	int i, type;
+
+	type = dev_stor_type(dd);
+	for (i = 0; i < specs[type].max_dev; i++)
+		if (dd == get_dev(specs[type].name, i))
+			return i;
+
+	return (specs[type].max_dev);
+}
+
+
+lbasize_t dev_read_stor(void *cookie, void *buf, lbasize_t len, lbastart_t start)
+{
+	int type;
+	block_dev_desc_t *dd = (block_dev_desc_t *)cookie;
+
+	if ((type = dev_stor_type(dd)) == ENUM_MAX)
+		return 0;
+
+	if (!dev_stor_is_valid(type, dd))
+		return 0;
+
+	if ((dd->block_read) == NULL) {
+		debugf("no block_read() for device 0x%08x\n");
+		return 0;
+	}
+
+	return (dd->block_read(dev_stor_index(dd), start, len, buf));
+}
+
+#endif /* CONFIG_API */

api_examples/Makefile

@@ -0,0 +1,103 @@
+#
+# (C) Copyright 2007 Semihalf
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+ifeq ($(ARCH),ppc)
+LOAD_ADDR = 0x40000
+endif
+
+#ifeq ($(ARCH),arm)
+#LOAD_ADDR = 0xc100000
+#endif
+
+include $(TOPDIR)/config.mk
+
+ELF	+= demo
+BIN	+= demo.bin
+
+#CFLAGS += -v
+
+COBJS	:= $(ELF:=.o)
+SOBJS	:= crt0.o
+ifeq ($(ARCH),ppc)
+SOBJS	+= ppcstring.o
+endif
+
+LIB	= $(obj)libglue.a
+LIBCOBJS= glue.o crc32.o ctype.o string.o vsprintf.o libgenwrap.o
+
+LIBOBJS	= $(addprefix $(obj),$(SOBJS) $(LIBCOBJS))
+
+SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(SOBJS:.o=.S)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+ELF	:= $(addprefix $(obj),$(ELF))
+BIN	:= $(addprefix $(obj),$(BIN))
+
+gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
+
+CPPFLAGS += -I..
+
+all:	$(obj).depend $(OBJS) $(LIB) $(BIN) $(ELF)
+
+#########################################################################
+$(LIB):	$(obj).depend $(LIBOBJS)
+		$(AR) $(ARFLAGS) $@ $(LIBOBJS)
+
+$(ELF):
+$(obj)%:	$(obj)%.o $(LIB)
+		$(LD) $(obj)crt0.o -Ttext $(LOAD_ADDR) \
+			-o $@ $< $(LIB) \
+			-L$(gcclibdir) -lgcc
+
+$(BIN):
+$(obj)%.bin:	$(obj)%
+		$(OBJCOPY) -O binary $< $@ 2>/dev/null
+
+$(obj)crc32.c:
+	@rm -f $(obj)crc32.c
+	ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c
+
+$(obj)ctype.c:
+	@rm -f $(obj)ctype.c
+	ln -s $(src)../lib_generic/ctype.c $(obj)ctype.c
+
+$(obj)string.c:
+	@rm -f $(obj)string.c
+	ln -s $(src)../lib_generic/string.c $(obj)string.c
+
+$(obj)vsprintf.c:
+	@rm -f $(obj)vsprintf.c
+	ln -s $(src)../lib_generic/vsprintf.c $(obj)vsprintf.c
+
+ifeq ($(ARCH),ppc)
+$(obj)ppcstring.S:
+	@rm -f $(obj)ppcstring.S
+	ln -s $(src)../lib_ppc/ppcstring.S $(obj)ppcstring.S
+endif
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

api_examples/crt0.S

@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#if defined(CONFIG_PPC)
+
+	.text
+
+	.globl _start
+_start:
+	b	main
+
+
+	.globl syscall
+syscall:
+	lis	%r11, syscall_ptr@ha
+	addi	%r11, %r11, syscall_ptr@l
+	lwz	%r11, 0(%r11)
+	mtctr	%r11
+	bctr
+
+
+	.globl syscall_ptr
+syscall_ptr:
+	.align	4
+	.long	0
+#else
+#error No support for this arch!
+#endif

api_examples/demo.c

@@ -0,0 +1,258 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <api_public.h>
+
+#include "glue.h"
+
+#define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)
+
+void	test_dump_si(struct sys_info *);
+void	test_dump_di(int);
+void	test_dump_sig(struct api_signature *);
+
+char buf[2048];
+
+#define WAIT_SECS 5
+
+int main(int argc, char *argv[])
+{
+	int rv = 0;
+	int h, i, j;
+	int devs_no;
+	struct api_signature *sig = NULL;
+	ulong start, now;
+	struct device_info *di;
+
+	if (!api_search_sig(&sig))
+		return -1;
+
+	syscall_ptr = sig->syscall;
+	if (syscall_ptr == NULL)
+		return -2;
+
+	if (sig->version > API_SIG_VERSION)
+		return -3;
+
+	printf("API signature found @%x\n", sig);
+	test_dump_sig(sig);
+
+	printf("\n*** Consumer API test ***\n");
+	printf("syscall ptr 0x%08x@%08x\n", syscall_ptr, &syscall_ptr);
+
+	/* console activities */
+	ub_putc('B');
+
+	printf("*** Press any key to continue ***\n");
+	printf("got char 0x%x\n", ub_getc());
+
+	/* system info */
+	test_dump_si(ub_get_sys_info());
+
+	/* timing */
+	printf("\n*** Timing - wait a couple of secs ***\n");
+	start = ub_get_timer(0);
+	printf("\ntime: start %lu\n\n", start);
+	for (i = 0; i < WAIT_SECS; i++)
+		for (j = 0; j < 1000; j++)
+			ub_udelay(1000);	/* wait 1 ms */
+
+	/* this is the number of milliseconds that passed from ub_get_timer(0) */
+	now = ub_get_timer(start);
+	printf("\ntime: now %lu\n\n", now);
+
+	/* enumerate devices */
+	printf("\n*** Enumerate devices ***\n");
+	devs_no = ub_dev_enum();
+
+	printf("Number of devices found: %d\n", devs_no);
+	if (devs_no == 0)
+		return -1;
+
+
+	printf("\n*** Show devices ***\n");
+	for (i = 0; i < devs_no; i++) {
+		test_dump_di(i);
+		printf("\n");
+	}
+
+	printf("\n*** Operations on devices ***\n");
+
+	/* test opening a device already opened */
+	h = 0;
+	if ((rv = ub_dev_open(h)) != 0) {
+		errf("open device %d error %d\n", h, rv);
+		return -1;
+	}
+	if ((rv = ub_dev_open(h)) != 0)
+		errf("open device %d error %d\n", h, rv);
+
+	ub_dev_close(h);
+
+	/* test storage */
+	printf("Trying storage devices...\n");
+	for (i = 0; i < devs_no; i++) {
+		di = ub_dev_get(i);
+
+		if (di->type & DEV_TYP_STOR)
+			break;
+
+	}
+	if (i == devs_no)
+		printf("No storage devices available\n");
+	else {
+		if ((rv = ub_dev_open(i)) != 0)
+			errf("open device %d error %d\n", i, rv);
+		else if ((rv = ub_dev_read(i, &buf, 200, 20)) != 0)
+			errf("could not read from device %d, error %d\n", i, rv);
+
+		ub_dev_close(i);
+	}
+
+	/* test networking */
+	printf("Trying network devices...\n");
+	for (i = 0; i < devs_no; i++) {
+		di = ub_dev_get(i);
+
+		if (di->type == DEV_TYP_NET)
+			break;
+
+	}
+	if (i == devs_no)
+		printf("No network devices available\n");
+	else {
+		if ((rv = ub_dev_open(i)) != 0)
+			errf("open device %d error %d\n", i, rv);
+		else if ((rv = ub_dev_send(i, &buf, 2048)) != 0)
+			errf("could not send to device %d, error %d\n", i, rv);
+
+		ub_dev_close(i);
+	}
+
+	if (ub_dev_close(h) != 0)
+		errf("could not close device %d\n", h);
+
+	printf("\n*** Env vars ***\n");
+
+	printf("ethact = %s\n", ub_env_get("ethact"));
+	printf("old fileaddr = %s\n", ub_env_get("fileaddr"));
+	ub_env_set("fileaddr", "deadbeef");
+	printf("new fileaddr = %s\n", ub_env_get("fileaddr"));
+
+	const char *env = NULL;
+
+	while ((env = ub_env_enum(env)) != NULL)
+		printf("%s = %s\n", env, ub_env_get(env));
+
+	/* reset */
+	ub_reset();
+	printf("\nHmm, reset returned...?!\n");
+
+	return rv;
+}
+
+void test_dump_sig(struct api_signature *sig)
+{
+	printf("signature:\n");
+	printf("  version\t= %d\n", sig->version);
+	printf("  checksum\t= 0x%08x\n", sig->checksum);
+	printf("  sc entry\t= 0x%08x\n", sig->syscall);
+}
+
+void test_dump_si(struct sys_info *si)
+{
+	int i;
+
+	printf("sys info:\n");
+	printf("  clkbus\t= 0x%08x\n", si->clk_bus);
+	printf("  clkcpu\t= 0x%08x\n", si->clk_cpu);
+	printf("  bar\t\t= 0x%08x\n", si->bar);
+
+	printf("---\n");
+	for (i = 0; i < si->mr_no; i++) {
+		if (si->mr[i].flags == 0)
+			break;
+
+		printf("  start\t= 0x%08lx\n", si->mr[i].start);
+		printf("  size\t= 0x%08lx\n", si->mr[i].size);
+
+		switch(si->mr[i].flags & 0x000F) {
+			case MR_ATTR_FLASH:
+				printf("  type FLASH\n");
+				break;
+			case MR_ATTR_DRAM:
+				printf("  type DRAM\n");
+				break;
+			case MR_ATTR_SRAM:
+				printf("  type SRAM\n");
+				break;
+			default:
+				printf("  type UNKNOWN\n");
+		}
+		printf("---\n");
+	}
+}
+
+static char * test_stor_typ(int type)
+{
+	if (type & DT_STOR_IDE)
+		return "IDE";
+
+	if (type & DT_STOR_SCSI)
+		return "SCSI";
+
+	if (type & DT_STOR_USB)
+		return "USB";
+
+	if (type & DT_STOR_MMC);
+		return "MMC";
+
+	return "Unknown";
+}
+
+void test_dump_di(int handle)
+{
+	int i;
+	struct device_info *di = ub_dev_get(handle);
+
+	printf("device info (%d):\n", handle);
+	printf("  cookie\t= 0x%08x\n", (uint32_t)di->cookie);
+	printf("  type\t\t= 0x%08x\n", di->type);
+
+	if (di->type == DEV_TYP_NET) {
+		printf("  hwaddr\t= ");
+		for (i = 0; i < 6; i++)
+			printf("%02x ", di->di_net.hwaddr[i]);
+
+		printf("\n");
+
+	} else if (di->type & DEV_TYP_STOR) {
+		printf("  type\t\t= %s\n", test_stor_typ(di->type));
+		printf("  blk size\t\t= %d\n", di->di_stor.block_size);
+		printf("  blk count\t\t= %d\n", di->di_stor.block_count);
+	}
+}

api_examples/glue.c

@@ -0,0 +1,405 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <api_public.h>
+
+#include "glue.h"
+
+static int valid_sig(struct api_signature *sig)
+{
+	uint32_t checksum;
+	struct api_signature s;
+
+	if (sig == NULL)
+		return 0;
+	/*
+	 * Clear the checksum field (in the local copy) so as to calculate the
+	 * CRC with the same initial contents as at the time when the sig was
+	 * produced
+	 */
+	s = *sig;
+	s.checksum = 0;
+
+	checksum = crc32(0, (unsigned char *)&s, sizeof(struct api_signature));
+
+	if (checksum != sig->checksum)
+		return 0;
+
+	return 1;
+}
+
+/*
+ * Searches for the U-Boot API signature
+ *
+ * returns 1/0 depending on found/not found result
+ */
+int api_search_sig(struct api_signature **sig) {
+
+	unsigned char *sp;
+
+	if (sig == NULL)
+		return 0;
+
+	sp = (unsigned char *)API_SEARCH_START;
+
+	while ((sp + (int)API_SIG_MAGLEN) < (unsigned char *)API_SEARCH_END) {
+		if (!memcmp(sp, API_SIG_MAGIC, API_SIG_MAGLEN)) {
+			*sig = (struct api_signature *)sp;
+			if (valid_sig(*sig))
+				return 1;
+		}
+		sp += API_SIG_MAGLEN;
+	}
+
+	*sig = NULL;
+	return 0;
+}
+
+/****************************************
+ *
+ * console
+ *
+ ****************************************/
+
+int ub_getc(void)
+{
+	int c;
+
+	if (!syscall(API_GETC, NULL, (uint32_t)&c))
+		return -1;
+
+	return c;
+}
+
+int ub_tstc(void)
+{
+	int t;
+
+	if (!syscall(API_TSTC, NULL, (uint32_t)&t))
+		return -1;
+
+	return t;
+}
+
+void ub_putc(char c)
+{
+	syscall(API_PUTC, NULL, (uint32_t)&c);
+}
+
+void ub_puts(const char *s)
+{
+	syscall(API_PUTS, NULL, (uint32_t)s);
+}
+
+/****************************************
+ *
+ * system
+ *
+ ****************************************/
+
+void ub_reset(void)
+{
+	syscall(API_RESET, NULL);
+}
+
+#define MR_MAX 5
+static struct mem_region mr[MR_MAX];
+static struct sys_info si;
+
+struct sys_info * ub_get_sys_info(void)
+{
+	int err = 0;
+
+	memset(&si, 0, sizeof(struct sys_info));
+	si.mr = mr;
+	si.mr_no = MR_MAX;
+	memset(&mr, 0, sizeof(mr));
+
+	if (!syscall(API_GET_SYS_INFO, &err, (u_int32_t)&si))
+		return NULL;
+
+	return ((err) ? NULL : &si);
+}
+
+/****************************************
+ *
+ * timing
+ *
+ ****************************************/
+
+void ub_udelay(unsigned long usec)
+{
+	syscall(API_UDELAY, NULL, &usec);
+}
+
+unsigned long ub_get_timer(unsigned long base)
+{
+	unsigned long cur;
+
+	if (!syscall(API_GET_TIMER, NULL, &cur, &base))
+		return 0;
+
+	return cur;
+}
+
+
+/****************************************************************************
+ *
+ * devices
+ *
+ * Devices are identified by handles: numbers 0, 1, 2, ..., MAX_DEVS-1
+ *
+ ***************************************************************************/
+
+#define MAX_DEVS 6
+
+static struct device_info devices[MAX_DEVS];
+
+struct device_info * ub_dev_get(int i)
+{
+	return ((i < 0 || i >= MAX_DEVS) ? NULL : &devices[i]);
+}
+
+/*
+ * Enumerates the devices: fills out device_info elements in the devices[]
+ * array.
+ *
+ * returns:		number of devices found
+ */
+int ub_dev_enum(void)
+{
+	struct device_info *di;
+	int n = 0;
+
+	memset(&devices, 0, sizeof(struct device_info) * MAX_DEVS);
+	di = &devices[0];
+
+	if (!syscall(API_DEV_ENUM, NULL, di))
+		return 0;
+
+	while (di->cookie != NULL) {
+
+		if (++n >= MAX_DEVS)
+			break;
+
+		/* take another device_info */
+		di++;
+
+		/* pass on the previous cookie */
+		di->cookie = devices[n - 1].cookie;
+
+		if (!syscall(API_DEV_ENUM, NULL, di))
+			return 0;
+	}
+
+	return n;
+}
+
+/*
+ * handle:	0-based id of the device
+ *
+ * returns:	0 when OK, err otherwise
+ */
+int ub_dev_open(int handle)
+{
+	struct device_info *di;
+	int err = 0;
+
+	if (handle < 0 || handle >= MAX_DEVS)
+		return API_EINVAL;
+
+	di = &devices[handle];
+
+	if (!syscall(API_DEV_OPEN, &err, di))
+		return -1;
+
+	return err;
+}
+
+int ub_dev_close(int handle)
+{
+	struct device_info *di;
+
+	if (handle < 0 || handle >= MAX_DEVS)
+		return API_EINVAL;
+
+	di = &devices[handle];
+	if (!syscall(API_DEV_CLOSE, NULL, di))
+		return -1;
+
+	return 0;
+}
+
+/*
+ *
+ * Validates device for read/write, it has to:
+ *
+ * - have sane handle
+ * - be opened
+ *
+ * returns:	0/1 accordingly
+ */
+static int dev_valid(int handle)
+{
+	if (handle < 0 || handle >= MAX_DEVS)
+		return 0;
+
+	if (devices[handle].state != DEV_STA_OPEN)
+		return 0;
+
+	return 1;
+}
+
+static int dev_stor_valid(int handle)
+{
+	if (!dev_valid(handle))
+		return 0;
+
+	if (!(devices[handle].type & DEV_TYP_STOR))
+		return 0;
+
+	return 1;
+}
+
+int ub_dev_read(int handle, void *buf, lbasize_t len, lbastart_t start)
+{
+	struct device_info *di;
+	lbasize_t act_len;
+	int err = 0;
+
+	if (!dev_stor_valid(handle))
+		return API_ENODEV;
+
+	di = &devices[handle];
+	if (!syscall(API_DEV_READ, &err, di, buf, &len, &start, &act_len))
+		return -1;
+
+	if (err)
+		return err;
+
+	if (act_len != len)
+		return API_EIO;
+
+	return 0;
+}
+
+static int dev_net_valid(int handle)
+{
+	if (!dev_valid(handle))
+		return 0;
+
+	if (devices[handle].type != DEV_TYP_NET)
+		return 0;
+
+	return 1;
+}
+
+int ub_dev_recv(int handle, void *buf, int len)
+{
+	struct device_info *di;
+	int err = 0, act_len;
+
+	if (!dev_net_valid(handle))
+		return API_ENODEV;
+
+	di = &devices[handle];
+	if (!syscall(API_DEV_READ, &err, di, buf, &len, &act_len))
+		return -1;
+
+	if (err)
+		return -1;
+
+	return act_len;
+}
+
+int ub_dev_send(int handle, void *buf, int len)
+{
+	struct device_info *di;
+	int err = 0;
+
+	if (!dev_net_valid(handle))
+		return API_ENODEV;
+
+	di = &devices[handle];
+	if (!syscall(API_DEV_WRITE, &err, di, buf, &len))
+		return -1;
+
+	return err;
+}
+
+/****************************************
+ *
+ * env vars
+ *
+ ****************************************/
+
+char * ub_env_get(const char *name)
+{
+	char *value;
+
+	if (!syscall(API_ENV_GET, NULL, (uint32_t)name, (uint32_t)&value))
+		return NULL;
+
+	return value;
+}
+
+void ub_env_set(const char *name, char *value)
+{
+	syscall(API_ENV_SET, NULL, (uint32_t)name, (uint32_t)value);
+}
+
+
+static char env_name[256];
+
+const char * ub_env_enum(const char *last)
+{
+	const char *env, *str;
+	int i;
+
+	env = NULL;
+
+	/*
+	 * It's OK to pass only the name piece as last (and not the whole
+	 * 'name=val' string), since the API_ENUM_ENV call uses envmatch()
+	 * internally, which handles such case
+	 */
+	if (!syscall(API_ENV_ENUM, NULL, (uint32_t)last, (uint32_t)&env))
+		return NULL;
+
+	if (!env)
+		/* no more env. variables to enumerate */
+		return NULL;
+
+	/* next enumerated env var */
+	memset(env_name, 0, 256);
+	for (i = 0, str = env; *str != '=' && *str != '\0';)
+		env_name[i++] = *str++;
+
+	env_name[i] = '\0';
+
+	return env_name;
+}

api_examples/glue.h

@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * This is the header file for conveniency wrapper routines (API glue)
+ */
+
+#ifndef _API_GLUE_H_
+#define _API_GLUE_H_
+
+#define API_SEARCH_START	(255 * 1024 * 1024)	/* start at 1MB below top RAM */
+#define API_SEARCH_END		(256 * 1024 * 1024 - 1)	/* ...and search to the end */
+
+int	syscall(int, int *, ...);
+void *	syscall_ptr;
+
+int	api_search_sig(struct api_signature **sig);
+
+/*
+ * ub_ library calls are part of the application, not U-Boot code!  They are
+ * front-end wrappers that are used by the consumer application: they prepare
+ * arguments for particular syscall and jump to the low level syscall()
+ */
+
+/* console */
+int	ub_getc(void);
+int	ub_tstc(void);
+void	ub_putc(char c);
+void	ub_puts(const char *s);
+
+/* system */
+void			ub_reset(void);
+struct sys_info *	ub_get_sys_info(void);
+
+/* time */
+void		ub_udelay(unsigned long);
+unsigned long	ub_get_timer(unsigned long);
+
+/* env vars */
+char *		ub_env_get(const char *name);
+void		ub_env_set(const char *name, char *value);
+const char *	ub_env_enum(const char *last);
+
+/* devices */
+int			ub_dev_enum(void);
+int			ub_dev_open(int handle);
+int			ub_dev_close(int handle);
+int			ub_dev_read(int handle, void *buf,
+				lbasize_t len, lbastart_t start);
+int			ub_dev_send(int handle, void *buf, int len);
+int			ub_dev_recv(int handle, void *buf, int len);
+struct device_info *	ub_dev_get(int);
+
+#endif /* _API_GLUE_H_ */

api_examples/libgenwrap.c

@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * This is is a set of wrappers/stubs that allow to use certain routines from
+ * U-Boot's lib_generic in the standalone app. This way way we can re-use
+ * existing code e.g. operations on strings and similar.
+ *
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <api_public.h>
+
+#include "glue.h"
+
+/*
+ * printf() and vprintf() are stolen from u-boot/common/console.c
+ */
+void printf (const char *fmt, ...)
+{
+	va_list args;
+	uint i;
+	char printbuffer[256];
+
+	va_start (args, fmt);
+
+	/* For this to work, printbuffer must be larger than
+	 * anything we ever want to print.
+	 */
+	i = vsprintf (printbuffer, fmt, args);
+	va_end (args);
+
+	/* Print the string */
+	ub_puts (printbuffer);
+}
+
+void vprintf (const char *fmt, va_list args)
+{
+	uint i;
+	char printbuffer[256];
+
+	/* For this to work, printbuffer must be larger than
+	 * anything we ever want to print.
+	 */
+	i = vsprintf (printbuffer, fmt, args);
+
+	/* Print the string */
+	ub_puts (printbuffer);
+}
+
+void putc (const char c)
+{
+	ub_putc(c);
+}
+
+void udelay(unsigned long usec)
+{
+	ub_udelay(usec);
+}
+
+void do_reset (void)
+{
+	ub_reset();
+}
+
+void *malloc(size_t len)
+{
+	return NULL;
+}

board/BuS/EB+MCF-EV123/u-boot.lds

@@ -126,7 +126,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    _sbss = .;
    *(.sbss) *(.scommon)

board/LEOX/elpt860/u-boot.lds

@@ -142,7 +142,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/MAI/AmigaOneG3SE/u-boot.lds

@@ -128,7 +128,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/Marvell/db64360/u-boot.lds

@@ -126,7 +126,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/Marvell/db64460/u-boot.lds

@@ -126,7 +126,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/RPXClassic/u-boot.lds

@@ -130,7 +130,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/RPXlite/u-boot.lds

@@ -130,7 +130,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/RPXlite_dw/u-boot.lds

@@ -130,7 +130,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/RRvision/u-boot.lds

@@ -132,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/adder/u-boot.lds

@@ -112,7 +112,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/ads5121/ads5121.c

@@ -25,6 +25,7 @@
 #include <mpc512x.h>
 #include <asm/bitops.h>
 #include <command.h>
+#include <fdt_support.h>
 
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
@@ -184,3 +185,11 @@ int checkboard (void)
 		brd_rev, cpld_rev);
 	return 0;
 }
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/ads5121/u-boot.lds

@@ -109,7 +109,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/adsvix/u-boot.lds

@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) }
 	_end = .;
 }

board/altera/dk1c20/u-boot.lds

@@ -61,7 +61,7 @@ SECTIONS
 
 	__bss_start = .;
 	. = ALIGN(4);
-	.bss :
+	.bss (NOLOAD) :
 	{
 		*(.bss)
 	}

board/altera/dk1s10/u-boot.lds

@@ -61,7 +61,7 @@ SECTIONS
 
 	__bss_start = .;
 	. = ALIGN(4);
-	.bss :
+	.bss (NOLOAD) :
 	{
 		*(.bss)
 	}

board/altera/ep1c20/u-boot.lds

@@ -87,7 +87,7 @@ SECTIONS
 	 * bss follows. We keep it adjacent to simplify init code.
 	 */
 	__bss_start = .;
-	.sbss :
+	.sbss (NOLOAD) :
 	{
 	  *(.sbss)
 	  *(.sbss.*)
@@ -95,7 +95,7 @@ SECTIONS
 	  *(.scommon)
 	}
 	. = ALIGN(4);
-	.bss :
+	.bss (NOLOAD) :
 	{
 	  *(.bss)
 	  *(.bss.*)

board/altera/ep1s10/u-boot.lds

@@ -87,7 +87,7 @@ SECTIONS
 	 * bss follows. We keep it adjacent to simplify init code.
 	 */
 	__bss_start = .;
-	.sbss :
+	.sbss (NOLOAD) :
 	{
 	  *(.sbss)
 	  *(.sbss.*)
@@ -95,7 +95,7 @@ SECTIONS
 	  *(.scommon)
 	}
 	. = ALIGN(4);
-	.bss :
+	.bss (NOLOAD) :
 	{
 	  *(.bss)
 	  *(.bss.*)

board/altera/ep1s40/u-boot.lds

@@ -87,7 +87,7 @@ SECTIONS
 	 * bss follows. We keep it adjacent to simplify init code.
 	 */
 	__bss_start = .;
-	.sbss :
+	.sbss (NOLOAD) :
 	{
 	  *(.sbss)
 	  *(.sbss.*)
@@ -95,7 +95,7 @@ SECTIONS
 	  *(.scommon)
 	}
 	. = ALIGN(4);
-	.bss :
+	.bss (NOLOAD) :
 	{
 	  *(.bss)
 	  *(.bss.*)

board/amcc/acadia/u-boot-nand.lds

@@ -124,7 +124,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/acadia/u-boot.lds

@@ -125,7 +125,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/bamboo/bamboo.c

@@ -67,13 +67,13 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
 	0x00,    /* Module data width continued: +0 */
 	0x04,    /* 2.5 Volt */
 	0x75,    /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */
+	0x00,    /* SDRAM Access from clock */
 #ifdef CONFIG_DDR_ECC
 	0x02,    /* ECC ON : 02 OFF : 00 */
 #else
 	0x00,    /* ECC ON : 02 OFF : 00 */
 #endif
-	0x82,    /* refresh Rate Type: Normal (15.625us) + Self refresh */
+	0x82,    /* refresh Rate Type: Normal (7.8us) + Self refresh */
-	0,
 	0,
 	0,
 	0x01,    /* wcsbc = 1 */

board/amcc/bamboo/u-boot-nand.lds

@@ -124,7 +124,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/bamboo/u-boot.lds

@@ -133,7 +133,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/bubinga/u-boot.lds

@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -138,7 +125,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/ebony/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ebony/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -145,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/katmai/katmai.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -24,21 +24,16 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
+#include <libfdt.h>
-#include <asm-ppc/gpio.h>
+#include <fdt_support.h>
-
+#include <asm/processor.h>
-#include "../cpu/ppc4xx/440spe_pcie.h"
+#include <asm/io.h>
-
+#include <asm/gpio.h>
-#undef PCIE_ENDPOINT
+#include <asm/4xx_pcie.h>
-/* #define PCIE_ENDPOINT 1 */
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 int board_early_init_f (void)
 {
 	unsigned long mfr;
@@ -224,10 +219,9 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts*/
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts*/
 
-/* SDR0_MFR should be part of Ethernet init */
+	mfsdr(sdr_mfr, mfr);
-	mfsdr (sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mfr &= ~SDR0_MFR_ECS_MASK;
+	mtsdr(sdr_mfr, mfr);
-/*	mtsdr(sdr_mfr, mfr); */
 
 	mtsdr(SDR0_PFC0, CFG_PFC0);
 
@@ -252,6 +246,18 @@ int checkboard (void)
 	return 0;
 }
 
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_wrdtr(u32 default_val) {
+	return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
+}
+
+u32 ddr_clktr(u32 default_val) {
+	return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
+}
+
 #if defined(CFG_DRAM_TEST)
 int testdram (void)
 {
@@ -396,6 +402,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -409,12 +416,13 @@ void pcie_setup_hoses(int busno)
 		if (!katmai_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i))
- 		if (ppc440spe_init_pcie_endport(i)) {
+			ret = ppc4xx_init_pcie_endport(i);
-#else
+		else
-		if (ppc440spe_init_pcie_rootport(i)) {
+			ret = ppc4xx_init_pcie_rootport(i);
-#endif
+		if (ret) {
-			printf("PCIE%d: initialization failed\n", i);
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -428,35 +436,33 @@ void pcie_setup_hoses(int busno)
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMSIZE,
-			       PCI_REGION_MEM
+			       PCI_REGION_MEM);
-			);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i)) {
-		ppc440spe_setup_pcie_endpoint(hose, i);
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
-		/*
+			/*
-		 * Reson for no scanning is endpoint can not generate
+			 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
+			 * upstream configuration accesses.
-		 */
+		    	 */
-#else
+		} else {
-		ppc440spe_setup_pcie_rootpoint(hose, i);
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		env = getenv ("pciscandelay");
+		    	/*
-		if (env != NULL) {
+		     	 * Config access can only go down stream
-			delay = simple_strtoul (env, NULL, 10);
+		     	 */
-			if (delay > 5)
+		    	hose->last_busno = pci_hose_scan(hose);
-				printf ("Warning, expect noticable delay before PCIe"
+		    	bus = hose->last_busno + 1;
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
 		}
-
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
@@ -541,3 +547,24 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/katmai/u-boot.lds

@@ -129,7 +129,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/kilauea/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/amcc/kilauea/cmd_pll.c

@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */

board/amcc/kilauea/config.mk

@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif

board/amcc/kilauea/init.S

@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from UDTech and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=256MByte (6), mode=7 (n*10*8) */
+	mtsdram_as(SDRAM_MB0CF, 0x00006701);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram_as(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram_as(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram_as(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+	blr

board/amcc/kilauea/kilauea.c

@@ -0,0 +1,392 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/*
+	 * Configure FPGA register with PCIe reset
+	 */
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc0);	/* assert PCIe reset */
+	mdelay(50);
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc3);	/* deassert PCIe reset */
+
+	/* Configure 405EX for NAND usage */
+	val = SDR0_CUST0_MUX_NDFC_SEL |
+		SDR0_CUST0_NDFC_ENABLE |
+		SDR0_CUST0_NDFC_BW_8_BIT |
+		SDR0_CUST0_NRB_BUSY |
+		(0x80000000 >> (28 + CFG_NAND_CS));
+	mtsdr(SDR0_CUST0, val);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int board_emac_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+static int board_pcie_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+	u32 pvr = get_pvr();
+
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
+	else
+		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < board_pcie_count(); i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/kilauea/memory.c

@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif

board/amcc/kilauea/u-boot-nand.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    /* Align to next NAND block */
+    . = ALIGN(0x4000);
+    common/environment.o  (.ppcenv)
+    /* Keep some space here for redundant env and potential bad env blocks */
+    . = ALIGN(0x10000);
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}

board/amcc/kilauea/u-boot.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/amcc/luan/luan.c

@@ -39,6 +39,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  ************************************************************************/
 int board_early_init_f(void)
 {
+	u32 mfr;
+
 	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
 	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
 	mtebc( pb1ap,  0x03800000 );
@@ -64,6 +66,10 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
+
 	return  0;
 }
 

board/amcc/luan/u-boot.lds

@@ -132,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/makalu/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/amcc/makalu/cmd_pll.c

@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */

board/amcc/makalu/config.mk

@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFA0000

board/amcc/makalu/init.S

@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from Senao and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB0CF, 0x00005201);
+
+	/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR,0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+#endif
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+
+	blr

board/amcc/makalu/makalu.c

@@ -0,0 +1,352 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/* Reset PCIe slots */
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 0);
+	udelay(100);
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 1);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < 2; i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/makalu/memory.c

@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	/*
+	 * Same as on Kilauea, Makalu generates exception 0x200
+	 * (machine check) after trap_init() in board_init_f,
+	 * when SDRAM is initialized here (late) and d-cache is
+	 * used earlier as INIT_RAM.
+	 * So for now, initialize DDR2 in init.S very early and
+	 * also use it for INIT_RAM. Then this exception doesn't
+	 * occur.
+	 */
+#if 0
+	u32 val;
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram(SDRAM_MB0CF, 0x00005201);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram(SDRAM_MMODE, 0x00000442);
+	mtsdram(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram(SDRAM_INITPLR11, 0x81000442);
+	mtsdram(SDRAM_INITPLR12, 0x81010780);
+	mtsdram(SDRAM_INITPLR13, 0x81010400);
+	mtsdram(SDRAM_INITPLR14, 0x00000000);
+	mtsdram(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram(SDRAM_CODT, 0x0080f837);
+	mtsdram(SDRAM_MODT0, 0x01800000);
+	mtsdram(SDRAM_MODT1, 0x00000000);
+
+	mtsdram(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	do {
+		mfsdram(SDRAM_MCSTAT, val);
+	} while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP);
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mfsdram(SDRAM_MCOPT2, val);
+	val |= SDRAM_MCOPT2_DCEN_ENABLE;
+	mtsdram(SDRAM_MCOPT2, val);
+#endif
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif

board/amcc/makalu/u-boot.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/amcc/ocotea/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ocotea/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -145,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/sequoia/init.S

@@ -20,57 +20,9 @@
  */
 
 #include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
 #include <config.h>
 
-/* General */
-#define TLB_VALID   0x00000200
-#define _256M       0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
 /**************************************************************************
  * TLB TABLE
  *
@@ -87,8 +39,20 @@
 tlbtab:
 	tlbtab_start
 
-	/*
+	/* vxWorks needs this as first entry for the Machine Check interrupt */
-	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for DDR SDRAM (Up to 2GB) */
+#ifdef CONFIG_4xx_DCACHE
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+#else
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
+
+	/* TLB-entry for EBC */
+	tlbentry( CFG_BCSR_BASE, SZ_256M, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
 #ifndef CONFIG_NAND_SPL
@@ -97,9 +61,6 @@ tlbtab:
 	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
 #endif
 
-	/* TLB-entry for DDR SDRAM (Up to 2GB) */
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-
 #ifdef CFG_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
 	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
@@ -111,9 +72,6 @@ tlbtab:
 	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
 	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
-	/* TLB-entry for EBC */
-	tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-
 	/* TLB-entry for NAND */
 	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 

board/amcc/sequoia/sdram.c

@@ -33,343 +33,11 @@
 #include <asm/io.h>
 #include <ppc440.h>
 
-#include "sdram.h"
-
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
-	defined(CONFIG_DDR_DATA_EYE)
 /*-----------------------------------------------------------------------------+
- * wait_for_dlllock.
+ * Prototypes
- +----------------------------------------------------------------------------*/
+ *-----------------------------------------------------------------------------*/
-static int wait_for_dlllock(void)
+extern int denali_wait_for_dlllock(void);
-{
+extern void denali_core_search_data_eye(void);
-	unsigned long val;
-	int wait = 0;
-
-	/* -----------------------------------------------------------+
-	 * Wait for the DCC master delay line to finish calibration
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_17);
-	val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
-	while (wait != 0xffff) {
-		val = mfdcr(ddrcfgd);
-		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
-			/* dlllockreg bit on */
-			return 0;
-		else
-			wait++;
-	}
-	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
-	debug("Waiting for dlllockreg bit to raise\n");
-
-	return -1;
-}
-#endif
-
-#if defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-int wait_for_dram_init_complete(void)
-{
-	unsigned long val;
-	int wait = 0;
-
-	/* --------------------------------------------------------------+
-	 * Wait for 'DRAM initialization complete' bit in status register
-	 * -------------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_00);
-
-	while (wait != 0xffff) {
-		val = mfdcr(ddrcfgd);
-		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
-			/* 'DRAM initialization complete' bit */
-			return 0;
-		else
-			wait++;
-	}
-
-	debug("DRAM initialization complete bit in status register did not rise\n");
-
-	return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(unsigned long memory_size)
-{
-	int k, j;
-	u32 val;
-	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
-	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
-	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
-	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
-	volatile u32 *ram_pointer;
-	u32 test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
-
-	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
-		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
-		/* -----------------------------------------------------------+
-		 * De-assert 'start' parameter.
-		 * ----------------------------------------------------------*/
-		mtdcr(ddrcfga, DDR0_02);
-		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-		mtdcr(ddrcfgd, val);
-
-		/* -----------------------------------------------------------+
-		 * Set 'wr_dqs_shift'
-		 * ----------------------------------------------------------*/
-		mtdcr(ddrcfga, DDR0_09);
-		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-		mtdcr(ddrcfgd, val);
-
-		/* -----------------------------------------------------------+
-		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
-		 * ----------------------------------------------------------*/
-		dqs_out_shift = wr_dqs_shift + 32;
-		mtdcr(ddrcfga, DDR0_22);
-		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-		mtdcr(ddrcfgd, val);
-
-		passing_cases = 0;
-
-		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
-			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
-			/* -----------------------------------------------------------+
-			 * Set 'dll_dqs_delay_X'.
-			 * ----------------------------------------------------------*/
-			/* dll_dqs_delay_0 */
-			mtdcr(ddrcfga, DDR0_17);
-			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
-			mtdcr(ddrcfga, DDR0_18);
-			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
-			mtdcr(ddrcfga, DDR0_19);
-			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-
-			ppcMsync();
-			ppcMbar();
-
-			/* -----------------------------------------------------------+
-			 * Assert 'start' parameter.
-			 * ----------------------------------------------------------*/
-			mtdcr(ddrcfga, DDR0_02);
-			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-			mtdcr(ddrcfgd, val);
-
-			ppcMsync();
-			ppcMbar();
-
-			/* -----------------------------------------------------------+
-			 * Wait for the DCC master delay line to finish calibration
-			 * ----------------------------------------------------------*/
-			if (wait_for_dlllock() != 0) {
-				printf("dlllock did not occur !!!\n");
-				printf("denali_core_search_data_eye!!!\n");
-				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-				       wr_dqs_shift, dll_dqs_delay_X);
-				hang();
-			}
-			ppcMsync();
-			ppcMbar();
-
-			if (wait_for_dram_init_complete() != 0) {
-				printf("dram init complete did not occur !!!\n");
-				printf("denali_core_search_data_eye!!!\n");
-				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-				       wr_dqs_shift, dll_dqs_delay_X);
-				hang();
-			}
-			udelay(100);  /* wait 100us to ensure init is really completed !!! */
-
-			/* write values */
-			for (j=0; j<NUM_TRIES; j++) {
-				ram_pointer[j] = test[j];
-
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-			}
-
-			/* read values back */
-			for (j=0; j<NUM_TRIES; j++) {
-				for (k=0; k<NUM_READS; k++) {
-					/* clear any cache at ram location */
-					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-					if (ram_pointer[j] != test[j])
-						break;
-				}
-
-				/* read error */
-				if (k != NUM_READS)
-					break;
-			}
-
-			/* See if the dll_dqs_delay_X value passed.*/
-			if (j < NUM_TRIES) {
-				/* Failed */
-				passing_cases = 0;
-				/* break; */
-			} else {
-				/* Passed */
-				if (passing_cases == 0)
-					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
-				passing_cases++;
-				if (passing_cases >= max_passing_cases) {
-					max_passing_cases = passing_cases;
-					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
-					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
-					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
-				}
-			}
-
-			/* -----------------------------------------------------------+
-			 * De-assert 'start' parameter.
-			 * ----------------------------------------------------------*/
-			mtdcr(ddrcfga, DDR0_02);
-			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-			mtdcr(ddrcfgd, val);
-
-		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
-	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
-	/* -----------------------------------------------------------+
-	 * Largest passing window is now detected.
-	 * ----------------------------------------------------------*/
-
-	/* Compute dll_dqs_delay_X value */
-	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
-	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
-	debug("DQS calibration - Window detected:\n");
-	debug("max_passing_cases = %d\n", max_passing_cases);
-	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
-	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
-	debug("dll_dqs_delay_X window = %d - %d\n",
-	       dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
-	/* -----------------------------------------------------------+
-	 * De-assert 'start' parameter.
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_02);
-	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-	mtdcr(ddrcfgd, val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'wr_dqs_shift'
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_09);
-	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_09=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
-	 * ----------------------------------------------------------*/
-	dqs_out_shift = wr_dqs_shift + 32;
-	mtdcr(ddrcfga, DDR0_22);
-	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_22=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'dll_dqs_delay_X'.
-	 * ----------------------------------------------------------*/
-	/* dll_dqs_delay_0 */
-	mtdcr(ddrcfga, DDR0_17);
-	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_17=0x%08lx\n", val);
-
-	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
-	mtdcr(ddrcfga, DDR0_18);
-	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_18=0x%08lx\n", val);
-
-	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
-	mtdcr(ddrcfga, DDR0_19);
-	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_19=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Assert 'start' parameter.
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_02);
-	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-	mtdcr(ddrcfgd, val);
-
-	ppcMsync();
-	ppcMbar();
-
-	/* -----------------------------------------------------------+
-	 * Wait for the DCC master delay line to finish calibration
-	 * ----------------------------------------------------------*/
-	if (wait_for_dlllock() != 0) {
-		printf("dlllock did not occur !!!\n");
-		hang();
-	}
-	ppcMsync();
-	ppcMbar();
-
-	if (wait_for_dram_init_complete() != 0) {
-		printf("dram init complete did not occur !!!\n");
-		hang();
-	}
-	udelay(100);  /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
 
 #if defined(CONFIG_NAND_SPL)
 /* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
@@ -428,15 +96,22 @@ long int initdram (int board_type)
 	mtsdram(DDR0_44, 0x00000003);
 	mtsdram(DDR0_02, 0x00000001);
 
-	wait_for_dlllock();
+	denali_wait_for_dlllock();
 #endif /* #ifndef CONFIG_NAND_U_BOOT */
 
 #ifdef CONFIG_DDR_DATA_EYE
 	/* -----------------------------------------------------------+
 	 * Perform data eye search if requested.
 	 * ----------------------------------------------------------*/
-	denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+	denali_core_search_data_eye();
 #endif
 
+	/*
+	 * Clear possible errors resulting from data-eye-search.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	set_mcsr(get_mcsr());
+
 	return (CFG_MBYTES_SDRAM << 20);
 }

board/amcc/sequoia/sdram.h

@@ -1,505 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPD_SDRAM_DENALI_H_
-#define _SPD_SDRAM_DENALI_H_
-
-#define ppcMsync	sync
-#define ppcMbar		eieio
-
-/* General definitions */
-#define MAX_SPD_BYTE        128         /* highest SPD byte # to read */
-#define DENALI_REG_NUMBER   45          /* 45 Regs in PPC440EPx Denali Core */
-#define SUPPORTED_DIMMS_NB  7           /* Number of supported DIMM modules types */
-#define SDRAM_NONE          0           /* No DIMM detected in Slot */
-#define MAXRANKS            2           /* 2 ranks maximum */
-
-/* Supported PLB Frequencies */
-#define PLB_FREQ_133MHZ     133333333
-#define PLB_FREQ_152MHZ     152000000
-#define PLB_FREQ_160MHZ     160000000
-#define PLB_FREQ_166MHZ     166666666
-
-/* Denali Core Registers */
-#define SDRAM_DCR_BASE 0x10
-
-#define DDR_DCR_BASE 0x10
-#define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
-#define ddrcfgd  (DDR_DCR_BASE+0x1)   /* DDR configuration data reg    */
-
-/*-----------------------------------------------------------------------------+
-  | Values for ddrcfga register - indirect addressing of these regs
-  +-----------------------------------------------------------------------------*/
-
-#define DDR0_00                         0x00
-#define DDR0_00_INT_ACK_MASK              0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL               0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK           0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0           0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1           0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2           0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3           0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4           0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5           0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6           0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7           0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_01                         0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK             0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
-
-#define DDR0_02                         0x02
-#define DDR0_02_MAX_CS_REG_MASK           0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK          0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_02_START_MASK                0x00000001
-#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
-#define DDR0_02_START_OFF                 0x00000000
-#define DDR0_02_START_ON                  0x00000001
-
-#define DDR0_03                         0x03
-#define DDR0_03_BSTLEN_MASK               0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK               0x00070000
-#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK             0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_04                         0x04
-#define DDR0_04_TRC_MASK                  0x1F000000
-#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK                 0x00070000
-#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK                 0x00000700
-#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
-
-#define DDR0_05                         0x05
-#define DDR0_05_TMRD_MASK                 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK                0x00070000
-#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK                  0x00000F00
-#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK             0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
-
-#define DDR0_06                         0x06
-#define DDR0_06_WRITEINTERP_MASK          0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK                 0x00070000
-#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK                 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK                 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_07                         0x07
-#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK                 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK             0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_08                         0x08
-#define DDR0_08_WRLAT_MASK                0x07000000
-#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK                 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK             0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
-#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_09                         0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK                0x00030000
-#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_10                         0x0A
-#define DDR0_10_WRITE_MODEREG_MASK        0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK               0x00000300
-#define DDR0_10_CS_MAP_NO_MEM             0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
-
-#define DDR0_11                         0x0B
-#define DDR0_11_SREFRESH_MASK             0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK                0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK                 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
-
-#define DDR0_12                         0x0C
-#define DDR0_12_TCKE_MASK                 0x0000007
-#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
-
-#define DDR0_13                         0x0D
-
-#define DDR0_14                         0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK                0x00010000
-#define DDR0_14_REDUC_64BITS              0x00000000
-#define DDR0_14_REDUC_32BITS              0x00010000
-#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
-
-#define DDR0_15                         0x0F
-
-#define DDR0_16                         0x10
-
-#define DDR0_17                         0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK           0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK             0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
-
-#define DDR0_18                         0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_19                         0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_20                         0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_21                         0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_22                         0x16
-/* ECC */
-#define DDR0_22_CTRL_RAW_MASK             0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000 /* ECC not being used */
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000 /* ECC checking is on, but no attempts to correct*/
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000 /* No ECC RAM storage available */
-#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC checking and correcting on */
-#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
-
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_23                         0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK                  0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_24                         0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
-
-#define DDR0_25                         0x19
-#define DDR0_25_VERSION_MASK              0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_26                         0x1A
-#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_27                         0x1B
-#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK                0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_28                         0x1C
-#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_29                         0x1D
-
-#define DDR0_30                         0x1E
-
-#define DDR0_31                         0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_32                         0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33                         0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_34                         0x22
-#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35                         0x23
-#define DDR0_35_ECC_U_ADDR_MASK           0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_36                         0x24
-#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37                         0x25
-#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38                         0x26
-#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39                         0x27
-#define DDR0_39_ECC_C_ADDR_MASK           0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_40                         0x28
-#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41                         0x29
-#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42                         0x2A
-#define DDR0_42_ADDR_PINS_MASK            0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_43                         0x2B
-#define DDR0_43_TWR_MASK                  0x07000000
-#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK              0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_44                         0x2C
-#define DDR0_44_TRCD_MASK                 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
-
-#endif /* _SPD_SDRAM_DENALI_H_ */

board/amcc/sequoia/sequoia.c

@@ -23,9 +23,13 @@
  */
 
 #include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
+#include <asm/gpio.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <ppc440.h>
+#include <asm/ppc4xx-intvec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,36 +46,6 @@ int board_early_init_f(void)
 	mtdcr(ebccfga, xbcfg);
 	mtdcr(ebccfgd, 0xb8400000);
 
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/* test-only: take GPIO init from pcs440ep ???? in config file */
-	out32(GPIO0_OR, 0x00000000);
-	out32(GPIO0_TCR, 0x0000000f);
-	out32(GPIO0_OSRL, 0x50015400);
-	out32(GPIO0_OSRH, 0x550050aa);
-	out32(GPIO0_TSRL, 0x50015400);
-	out32(GPIO0_TSRH, 0x55005000);
-	out32(GPIO0_ISR1L, 0x50000000);
-	out32(GPIO0_ISR1H, 0x00000000);
-	out32(GPIO0_ISR2L, 0x00000000);
-	out32(GPIO0_ISR2H, 0x00000100);
-	out32(GPIO0_ISR3L, 0x00000000);
-	out32(GPIO0_ISR3H, 0x00000000);
-
-	out32(GPIO1_OR, 0x00000000);
-	out32(GPIO1_TCR, 0xc2000000);
-	out32(GPIO1_OSRL, 0x5c280000);
-	out32(GPIO1_OSRH, 0x00000000);
-	out32(GPIO1_TSRL, 0x0c000000);
-	out32(GPIO1_TSRH, 0x00000000);
-	out32(GPIO1_ISR1L, 0x00005550);
-	out32(GPIO1_ISR1H, 0x00000000);
-	out32(GPIO1_ISR2L, 0x00050000);
-	out32(GPIO1_ISR2H, 0x00000000);
-	out32(GPIO1_ISR3L, 0x01400000);
-	out32(GPIO1_ISR3H, 0x00000000);
-
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 *-------------------------------------------------------------------*/
@@ -100,16 +74,16 @@ int board_early_init_f(void)
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
 
 	/* 50MHz tmrclk */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
 
 	/* clear write protects */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
 
 	/* enable Ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
 
 	/* enable USB device */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+	out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
 
 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -414,6 +388,16 @@ int testdram(void)
 }
 #endif
 
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices.
+ */
+void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
+}
+#endif
+
 /*************************************************************************
  *  pci_pre_init
  *
@@ -465,6 +449,9 @@ int pci_pre_init(struct pci_controller *hose)
 	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
 	mtdcr(plb1_acr, addr);
 
+#ifdef CONFIG_PCI_PNP
+	hose->fixup_irq = sequoia_pci_fixup_irq;
+#endif
 	return 1;
 }
 #endif /* defined(CONFIG_PCI) */
@@ -583,3 +570,24 @@ int post_hotkeys_pressed(void)
 	return 0;	/* No hotkeys supported */
 }
 #endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/sequoia/u-boot-nand.lds

@@ -124,7 +124,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/sequoia/u-boot.lds

@@ -130,7 +130,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/taihu/u-boot.lds

@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -138,7 +125,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/taishan/showinfo.c

@@ -33,25 +33,25 @@ void show_reset_reg(void)
 
 	/* read clock regsiter */
 	printf("===== Display reset and initialize register Start =========\n");
-	mfclk(clk_pllc,reg);
+	mfcpr(clk_pllc,reg);
 	printf("cpr_pllc   = %#010x\n",reg);
 
-	mfclk(clk_plld,reg);
+	mfcpr(clk_plld,reg);
 	printf("cpr_plld   = %#010x\n",reg);
 
-	mfclk(clk_primad,reg);
+	mfcpr(clk_primad,reg);
 	printf("cpr_primad = %#010x\n",reg);
 
-	mfclk(clk_primbd,reg);
+	mfcpr(clk_primbd,reg);
 	printf("cpr_primbd = %#010x\n",reg);
 
-	mfclk(clk_opbd,reg);
+	mfcpr(clk_opbd,reg);
 	printf("cpr_opbd   = %#010x\n",reg);
 
-	mfclk(clk_perd,reg);
+	mfcpr(clk_perd,reg);
 	printf("cpr_perd   = %#010x\n",reg);
 
-	mfclk(clk_mald,reg);
+	mfcpr(clk_mald,reg);
 	printf("cpr_mald   = %#010x\n",reg);
 
 	/* read sdr register */

board/amcc/taishan/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/taishan/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -145,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/walnut/u-boot.lds

@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -139,7 +126,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/yosemite/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/yosemite/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -145,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/yucca/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o		(.text)
     board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -145,7 +132,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/amcc/yucca/yucca.c

@@ -27,29 +27,17 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/4xx_pcie.h>
 
 #include "yucca.h"
-#include "../cpu/ppc4xx/440spe_pcie.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
-
 void fpga_init (void);
 
-void get_sys_info(PPC440_SYS_INFO *board_cfg );
-int compare_to_true(char *str );
-char *remove_l_w_space(char *in_str );
-char *remove_t_w_space(char *in_str );
-int get_console_port(void);
-
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 #define DEBUG_ENV
 #ifdef DEBUG_ENV
 #define DEBUGF(fmt,args...) printf(fmt ,##args)
@@ -541,10 +529,10 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
 
-	/* SDR0_MFR should be part of Ethernet init */
+	mfsdr(sdr_mfr, mfr);
-	mfsdr (sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mfr &= ~SDR0_MFR_ECS_MASK;
+	mtsdr(sdr_mfr, mfr);
-	/*mtsdr(sdr_mfr, mfr);*/
+
 	fpga_init();
 
 	return 0;
@@ -850,6 +838,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -863,14 +852,16 @@ void pcie_setup_hoses(int busno)
 		if (!yucca_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i)) {
- 		yucca_setup_pcie_fpga_endpoint(i);
+			yucca_setup_pcie_fpga_endpoint(i);
- 		if (ppc440spe_init_pcie_endport(i)) {
+			ret = ppc4xx_init_pcie_endport(i);
-#else
+		} else {
-		yucca_setup_pcie_fpga_rootpoint(i);
+			yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
+			ret = ppc4xx_init_pcie_rootport(i);
-#endif
+		}
-			printf("PCIE%d: initialization failed\n", i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -884,35 +875,33 @@ void pcie_setup_hoses(int busno)
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMSIZE,
-			PCI_REGION_MEM
+			PCI_REGION_MEM);
-			);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i)) {
-		ppc440spe_setup_pcie_endpoint(hose, i);
+			ppc4xx_setup_pcie_endpoint(hose, i);
-		/*
+			/*
-		 * Reson for no scanning is endpoint can not generate
+			 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
+			 * upstream configuration accesses.
-		 */
+		 	 */
-#else
+		} else {
-		ppc440spe_setup_pcie_rootpoint(hose, i);
+			ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv("pciscandelay");
+			if (env != NULL) {
+				delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		env = getenv ("pciscandelay");
+			/*
-		if (env != NULL) {
+			 * Config access can only go down stream
-			delay = simple_strtoul (env, NULL, 10);
+		 	 */
-			if (delay > 5)
+			hose->last_busno = pci_hose_scan(hose);
-				printf ("Warning, expect noticable delay before PCIe"
+			bus = hose->last_busno + 1;
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
 		}
-
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */

board/amirix/ap1000/u-boot.lds

@@ -61,7 +61,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)
@@ -133,7 +133,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/apollon/Makefile

@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= apollon.o mem.o sys_info.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend

board/apollon/apollon.c

@@ -0,0 +1,472 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/mem.h>
+#include <asm/mach-types.h>
+
+void wait_for_command_complete(unsigned int wd_base);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define write_config_reg(reg, value)					\
+do {									\
+	writeb(value, reg);						\
+} while (0)
+
+#define mask_config_reg(reg, mask)					\
+do {									\
+	char value = readb(reg) & ~(mask);				\
+	writeb(value, reg);						\
+} while (0)
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay(unsigned long loops)
+{
+	__asm__("1:\n" "subs %0, %1, #1\n"
+		  "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init(void)
+{
+	gpmc_init();		/* in SRAM or SDRM, finish GPMC */
+
+	gd->bd->bi_arch_number = 919;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called path is with sram stack.
+ **********************************************************/
+void s_init(void)
+{
+	watchdog_init();
+	set_muxconf_regs();
+	delay(100);
+
+	peripheral_enable();
+	icache_enable();
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r(void)
+{
+	ether_init();		/* better done here so timers are init'ed */
+	return (0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+void watchdog_init(void)
+{
+	/* There are 4 watch dogs.  1 secure, and 3 general purpose.
+	 * The ROM takes care of the secure one. Of the 3 GP ones,
+	 * 1 can reset us directly, the other 2 only generate MPU interrupts.
+	 */
+	__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
+	wait_for_command_complete(WD2_BASE);
+	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
+
+#define MPU_WD_CLOCKED 1
+#if MPU_WD_CLOCKED
+	/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
+	__raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
+	wait_for_command_complete(WD3_BASE);
+	__raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
+
+	__raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
+	wait_for_command_complete(WD4_BASE);
+	__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
+#endif
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+void wait_for_command_complete(unsigned int wd_base)
+{
+	int pending = 1;
+	do {
+		pending = __raw_readl(wd_base + WWPS);
+	} while (pending);
+}
+
+/*******************************************************************
+ * Routine:ether_init
+ * Description: take the Ethernet controller out of reset and wait
+ *  		   for the EEPROM load to complete.
+ ******************************************************************/
+void ether_init(void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+	int cnt = 20;
+
+	__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2);	/*protect->gpio74 */
+
+	__raw_writew(0x0, LAN_RESET_REGISTER);
+	do {
+		__raw_writew(0x1, LAN_RESET_REGISTER);
+		udelay(100);
+		if (cnt == 0) {
+			printf("1. eth reset err\n");
+			goto eth_reset_err_out;
+		}
+		--cnt;
+	} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
+
+	cnt = 20;
+
+	do {
+		__raw_writew(0x0, LAN_RESET_REGISTER);
+		udelay(100);
+		if (cnt == 0) {
+			printf("2. eth reset err\n");
+			goto eth_reset_err_out;
+		}
+		--cnt;
+	} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
+	udelay(1000);
+
+	mask_config_reg(ETH_CONTROL_REG, 0x01);
+	udelay(1000);
+
+eth_reset_err_out:
+	return;
+#endif
+}
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init(void)
+{
+	unsigned int size0 = 0, size1 = 0;
+	u32 mtype, btype, rev = 0, cpu = 0;
+#define NOT_EARLY 0
+
+	btype = get_board_type();
+	mtype = get_mem_type();
+	rev = get_cpu_rev();
+	cpu = get_cpu_type();
+
+	display_board_info(btype);
+
+	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+		/* init other chip select */
+		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
+	}
+
+	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = size0;
+#if CONFIG_NR_DRAM_BANKS > 1
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
+	gd->bd->bi_dram[1].size = size1;
+#endif
+
+	return 0;
+}
+
+/**********************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers
+ *              specific to the hardware
+ *********************************************************/
+void set_muxconf_regs(void)
+{
+	muxSetupSDRC();
+	muxSetupGPMC();
+	muxSetupUsb0();		/* USB Device */
+	muxSetupUsbHost();	/* USB Host */
+	muxSetupUART1();
+	muxSetupLCD();
+	muxSetupMMCSD();
+	muxSetupTouchScreen();
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+void peripheral_enable(void)
+{
+	unsigned int v, if_clks = 0, func_clks = 0;
+
+	/* Enable GP2 timer. */
+	if_clks |= BIT4 | BIT3;
+	func_clks |= BIT4 | BIT3;
+	/* Sys_clk input OMAP2420_GPT2 */
+	v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
+	__raw_writel(v, CM_CLKSEL2_CORE);
+	__raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+	/* Enable UART1 clock */
+	func_clks |= BIT21;
+	if_clks |= BIT21;
+#endif
+	/* Interface clocks on */
+	v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
+	__raw_writel(v, CM_ICLKEN1_CORE);
+	/* Functional Clocks on */
+	v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
+	__raw_writel(v, CM_FCLKEN1_CORE);
+	delay(1000);
+
+#ifndef KERNEL_UPDATED
+	{
+#define V1 0xffffffff
+#define V2 0x00000007
+
+		__raw_writel(V1, CM_FCLKEN1_CORE);
+		__raw_writel(V2, CM_FCLKEN2_CORE);
+		__raw_writel(V1, CM_ICLKEN1_CORE);
+		__raw_writel(V1, CM_ICLKEN2_CORE);
+	}
+#endif
+}
+
+/****************************************
+ * Routine: muxSetupUsb0   (ostboot)
+ * Description: Setup usb muxing
+ *****************************************/
+void muxSetupUsb0(void)
+{
+	mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
+}
+
+/****************************************
+ * Routine: muxSetupUSBHost   (ostboot)
+ * Description: Setup USB Host muxing
+ *****************************************/
+void muxSetupUsbHost(void)
+{
+	/* V19 */
+	write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
+	/* W20 */
+	write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
+	/* N14 */
+	write_config_reg(CONTROL_PADCONF_GPIO69, 3);
+	/* P15 */
+	write_config_reg(CONTROL_PADCONF_GPIO70, 3);
+	/* L18 */
+	write_config_reg(CONTROL_PADCONF_GPIO102, 3);
+	/* L19 */
+	write_config_reg(CONTROL_PADCONF_GPIO103, 3);
+	/* K15 */
+	write_config_reg(CONTROL_PADCONF_GPIO104, 3);
+	/* K14 */
+	write_config_reg(CONTROL_PADCONF_GPIO105, 3);
+}
+
+/****************************************
+ * Routine: muxSetupUART1  (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+void muxSetupUART1(void)
+{
+	/* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
+	/* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
+	/* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
+	/* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
+}
+
+/****************************************
+ * Routine: muxSetupLCD   (ostboot)
+ * Description: Setup lcd muxing
+ *****************************************/
+void muxSetupLCD(void)
+{
+	/* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
+	/* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
+	/* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
+	/* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
+	/* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
+	/* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
+	/* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
+	/* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
+	/* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
+	/* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
+	/* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
+	/* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
+	/* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
+	/* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
+	/* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
+	/* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
+	/* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
+	/* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
+	/* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
+	/* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
+	/* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
+	/* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
+}
+
+/****************************************
+ * Routine: muxSetupMMCSD (ostboot)
+ * Description: set up MMC muxing
+ *****************************************/
+void muxSetupMMCSD(void)
+{
+	/* SDMMC_CLKI pin configuration,  PIN = H15, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
+	/* SDMMC_CLKO pin configuration,  PIN = G19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
+	/* SDMMC_CMD pin configuration,   PIN = H18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
+	/* SDMMC_DAT0 pin configuration,  PIN = F20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
+	/* SDMMC_DAT1 pin configuration,  PIN = H14, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
+	/* SDMMC_DAT2 pin configuration,  PIN = E19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
+	/* SDMMC_DAT3 pin configuration,  PIN = D19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
+	/* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
+	/* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
+	/* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
+	/* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
+	/* SDMMC_CDIR pin configuration,  PIN = G18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
+}
+
+/******************************************
+ * Routine: muxSetupTouchScreen (ostboot)
+ * Description:  Set up touch screen muxing
+ *******************************************/
+void muxSetupTouchScreen(void)
+{
+	/* SPI1_CLK pin configuration,  PIN = U18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
+	/* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
+	/* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
+	/* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
+#define CONTROL_PADCONF_GPIO85	CONTROL_PADCONF_SPI1_NCS1
+	/* PEN_IRQ pin configuration,   PIN = N15, Mode = 3, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_GPIO85, 3);
+}
+
+/***************************************************************
+ * Routine: muxSetupGPMC (ostboot)
+ * Description: Configures balls which cam up in protected mode
+ ***************************************************************/
+void muxSetupGPMC(void)
+{
+	/* gpmc_io_dir, MCR */
+	writel(0x4800008C, 0x19000000);
+
+	/* NOR FLASH CS0 */
+	/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
+	write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
+	/* MPDB(Multi Port Debug Port) CS1 */
+	/* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
+	/* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
+	/* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
+	/* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
+	/* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
+	/* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
+	/* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
+}
+
+/****************************************************************
+ * Routine: muxSetupSDRC  (ostboot)
+ * Description: Configures balls which come up in protected mode
+ ****************************************************************/
+void muxSetupSDRC(void)
+{
+	/* It's set by IPL */
+}

board/apollon/config.mk

@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2005-2007
+# Samsung Electronics
+#
+# Samsung December board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# December has 1 bank of 128MB mDDR-SDRAM on CS0
+# December has 1 bank of  00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+#TEXT_BASE = 0x40270000
+
+# Handy to get symbols to debug ROM version.
+#TEXT_BASE = 0x0
+#TEXT_BASE = 0x08000000

board/apollon/lowlevel_init.S

@@ -0,0 +1,337 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include "mem.h"
+
+#define APOLLON_CS0_BASE	0x00000000
+
+#ifdef PRCM_CONFIG_I
+#define SDRC_ACTIM_CTRLA_0_VAL	0x7BA35907
+#define SDRC_ACTIM_CTRLB_0_VAL	0x00000013
+#define SDRC_RFR_CTRL_0_VAL	0x00044C01
+#elif defined(PRCM_CONFIG_II)
+#define SDRC_ACTIM_CTRLA_0_VAL	0x4A59B485
+#define SDRC_ACTIM_CTRLB_0_VAL	0x0000000C
+#define SDRC_RFR_CTRL_0_VAL	0x00030001
+#endif
+
+#define SDRAM_BASE_ADDRESS	0x80008000
+
+_TEXT_BASE:
+	.word	TEXT_BASE	/* sdram load addr from config.mk */
+
+.globl lowlevel_init
+lowlevel_init:
+
+#ifdef CFG_NOR_BOOT
+	/* Check running in SDRAM */
+	mov	r0, pc, lsr #28
+	cmp	r0, #8
+	beq	prcm_setup
+
+flash_setup:
+	/* In Flash */
+	ldr	r0, =WD2_BASE
+	ldr	r1, =WD_UNLOCK1
+	str	r1, [r0, #WSPR]
+
+	ldr	r1, =WD_UNLOCK2
+	str	r1, [r0, #WSPR]
+
+	/* Pin muxing for SDRC */
+	mov	r1, #0x00
+	ldr	r0, =0x480000A1		/* ball C12, mode 0 */
+	strb	r1, [r0]
+
+	ldr	r0, =0x48000032		/* ball D11, mode 0 */
+	strb	r1, [r0]
+
+	ldr	r0, =0x480000A3		/* ball B13, mode 0 */
+	strb	r1, [r0]
+
+	/* SDRC setting */
+	ldr	r0, =OMAP2420_SDRC_BASE
+	ldr	r1, =0x00000010
+	str	r1, [r0, #0x10]
+
+	ldr	r1, =0x00000100
+	str	r1, [r0, #0x44]
+
+	/* SDRC CS0 configuration */
+	ldr	r1, =0x00d04011
+	str	r1, [r0, #0x80]
+
+	ldr	r1, =SDRC_ACTIM_CTRLA_0_VAL
+	str	r1, [r0, #0x9C]
+
+	ldr	r1, =SDRC_ACTIM_CTRLB_0_VAL
+	str	r1, [r0, #0xA0]
+
+	ldr	r1, =SDRC_RFR_CTRL_0_VAL
+	str	r1, [r0, #0xA4]
+
+	ldr	r1, =0x00000041
+	str	r1, [r0, #0x70]
+
+	/* Manual command sequence */
+	ldr	r1, =0x00000007
+	str	r1, [r0, #0xA8]
+
+	ldr	r1, =0x00000000
+	str	r1, [r0, #0xA8]
+
+	ldr	r1, =0x00000001
+	str	r1, [r0, #0xA8]
+
+	ldr	r1, =0x00000002
+	str	r1, [r0, #0xA8]
+	str	r1, [r0, #0xA8]
+
+	/*
+	 * CS0 SDRC Mode register
+	 *   Burst length = 4 - DDR memory
+	 *   Serial mode
+	 *   CAS latency = 3
+	 */
+	ldr	r1, =0x00000032
+	str	r1, [r0, #0x84]
+
+	/* Note: You MUST set EMR values */
+	/* EMR1 & EMR2 */
+	ldr	r1, =0x00000000
+	str	r1, [r0, #0x88]
+	str	r1, [r0, #0x8C]
+
+#ifdef OLD_SDRC_DLLA_CTRL
+	/* SDRC_DLLA_CTRL */
+	ldr	r1, =0x00007306
+	str	r1, [r0, #0x60]
+
+	ldr	r1, =0x00007303
+	str	r1, [r0, #0x60]
+#else
+	/* SDRC_DLLA_CTRL */
+	ldr	r1, =0x00000506
+	str	r1, [r0, #0x60]
+
+	ldr	r1, =0x00000503
+	str	r1, [r0, #0x60]
+#endif
+
+#ifdef __BROKEN_FEATURE__
+	/* SDRC_DLLB_CTRL */
+	ldr	r1, =0x00000506
+	str	r1, [r0, #0x68]
+
+	ldr	r1, =0x00000503
+	str	r1, [r0, #0x68]
+#endif
+
+	/* little delay after init */
+	mov	r2, #0x1800
+1:
+	subs	r2, r2, #0x1
+	bne	1b
+
+	/* Setup base address */
+	ldr	r0, =0x00000000		/* NOR address */
+	ldr	r1, =SDRAM_BASE_ADDRESS	/* SDRAM address */
+	ldr	r2, =0x20000		/* Size: 128KB */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}
+	stmia	r1!, {r3-r10}
+	cmp	r0, r2
+	ble	copy_loop
+
+	ldr	r1, =SDRAM_BASE_ADDRESS
+	mov	lr, pc
+	mov	pc, r1
+#endif
+
+prcm_setup:
+	ldr	r0, =OMAP2420_CM_BASE
+	ldr	r1, [r0, #0x544]	/* CLKSEL2_PLL */
+	bic	r1, r1, #0x03
+	orr	r1, r1, #0x02
+	str	r1, [r0, #0x544]
+
+	ldr	r1, [r0, #0x500]
+	bic	r1, r1, #0x03
+	orr	r1, r1, #0x01
+	str	r1, [r0, #0x500]
+
+	ldr	r1, [r0, #0x140]
+	bic	r1, r1, #0x1f
+	orr	r1, r1, #0x02
+	str	r1, [r0, #0x140]
+
+#ifdef PRCM_CONFIG_I
+	ldr	r1, =0x000003C3
+#else
+	ldr	r1, =0x00000343
+#endif
+	str	r1, [r0, #0x840]
+
+	ldr	r1, =0x00000002
+	str	r1, [r0, #0x340]
+
+	ldr	r1, =CM_CLKSEL1_CORE
+#ifdef PRCM_CONFIG_I
+	ldr	r2, =0x08300C44
+#else
+	ldr	r2, =0x04600C26
+#endif
+	str	r2, [r1]
+
+	ldr	r0, =OMAP2420_CM_BASE
+	ldr	r1, [r0, #0x084]
+	and	r1, r1, #0x01
+	cmp	r1, #0x01
+	bne	clkvalid
+
+	b	.
+
+clkvalid:
+	mov	r1, #0x01
+	str	r1, [r0, #0x080]
+
+waitvalid:
+	ldr	r1, [r0, #0x084]
+	and	r1, r1, #0x01
+	cmp	r1, #0x00
+	bne	waitvalid
+
+	ldr	r0, =CM_CLKSEL1_PLL
+#ifdef PRCM_CONFIG_I
+	ldr	r1, =0x01837100
+#else
+	ldr	r1, =0x01832100
+#endif
+	str	r1, [r0]
+
+	ldr	r0, =PRCM_CLKCFG_CTRL
+	mov	r1, #0x01
+	str	r1, [r0]
+	mov	r6, #0x50
+loop1:
+	subs	r6, r6, #0x01
+	cmp	r6, #0x01
+	bne	loop1
+
+	ldr	r0, =CM_CLKEN_PLL
+	mov	r1, #0x0f
+	str	r1, [r0]
+
+	mov	r6, #0x100
+loop2:
+	subs	r6, r6, #0x01
+	cmp	r6, #0x01
+	bne	loop2
+
+	ldr	r0, =0x48008200
+	ldr	r1, =0xbfffffff
+	str	r1, [r0]
+
+	ldr	r0, =0x48008210
+	ldr	r1, =0xfffffff9
+	str	r1, [r0]
+
+	ldr	r0, =0x4806a004
+	ldr	r1, =0x00
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a020
+	ldr	r1, =0x07
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a00c
+	ldr	r1, =0x83
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a000
+	ldr	r1, =0x1a
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a004
+	ldr	r1, =0x00
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a00c
+	ldr	r1, =0x03
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a010
+	ldr	r1, =0x03
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a008
+	ldr	r1, =0x04
+	strb	r1, [r0]
+
+	ldr	r0, =0x4806a020
+	ldr	r1, =0x00
+	strb	r1, [r0]
+
+#if 0
+	ldr	r0, =0x4806a000
+	mov	r1, #'u'
+	strb	r1, [r0]
+#endif
+
+#if 0
+	/* LED0 OFF */
+	ldr	r3, =0x480000E5
+	mov	r4, #0x0b
+	strb	r4, [r3]
+#endif
+
+	ldr	sp,	SRAM_STACK
+	str	ip,	[sp]	/* stash old link register */
+	mov	ip,	lr	/* save link reg across call */
+	bl	s_init		/* go setup pll,mux,memory */
+	ldr	ip,	[sp]	/* restore save ip */
+	mov	lr,	ip	/* restore link reg */
+
+	/* map interrupt controller */
+	ldr	r0,	VAL_INTH_SETUP
+	mcr	p15, 0, r0, c15, c2, 4
+
+	/* back to arch calling code */
+	mov	pc,	lr
+
+	/* the literal pools origin */
+	.ltorg
+
+VAL_INTH_SETUP:
+	.word PERIFERAL_PORT_BASE
+SRAM_STACK:
+	.word LOW_LEVEL_SRAM_STACK

board/apollon/mem.c

@@ -0,0 +1,235 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+
+#include "mem.h"
+
+/************************************************************
+ * sdelay() - simple spin loop.  Will be constant time as
+ *  its generally used in 12MHz bypass conditions only.  This
+ *  is necessary until timers are accessible.
+ *
+ *  not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay(unsigned long loops)
+{
+	__asm__("1:\n" "subs %0, %1, #1\n"
+		  "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/********************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ * (config II default).
+ *   -- called from SRAM, or Flash (using temp SRAM stack).
+ ********************************************************************/
+void prcm_init(void) { }
+
+/**************************************************************************
+ * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
+ *  command line mem=xyz use all memory with out discontigious support
+ *  compiled in.  Could do it at the ATAG, but there really is two banks...
+ * Called as part of 2nd phase DDR init.
+ **************************************************************************/
+void make_cs1_contiguous(void)
+{
+	u32 size, a_add_low, a_add_high;
+
+	size = get_sdr_cs_size(SDRC_CS0_OSET);
+	size /= SZ_32M;		/* find size to offset CS1 */
+	a_add_high = (size & 3) << 8;	/* set up low field */
+	a_add_low = (size & 0x3C) >> 2;	/* set up high field */
+	__raw_writel((a_add_high | a_add_low), SDRC_CS_CFG);
+
+}
+
+/********************************************************
+ *  mem_ok() - test used to see if timings are correct
+ *             for a part. Helps in gussing which part
+ *             we are currently using.
+ *******************************************************/
+u32 mem_ok(void)
+{
+	u32 val1, val2;
+	u32 pattern = 0x12345678;
+
+	/* clear pos A */
+	__raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);
+	/* pattern to pos B */
+	__raw_writel(pattern, OMAP2420_SDRC_CS0);
+	/* remove pattern off the bus */
+	__raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);
+	/* get pos A value */
+	val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);
+	val2 = __raw_readl(OMAP2420_SDRC_CS0);	/* get val2 */
+
+	/* see if pos A value changed */
+	if ((val1 != 0) || (val2 != pattern))
+		return (0);
+	else
+		return (1);
+}
+
+/********************************************************
+ *  sdrc_init() - init the sdrc chip selects CS0 and CS1
+ *  - early init routines, called from flash or
+ *  SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+#define EARLY_INIT 1
+	/* only init up first bank here */
+	do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT);
+}
+
+/*************************************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ *  -called from low level code with stack only.
+ *  -code sets up SDRAM timing and muxing for 2422 or 2420.
+ *  -optimal settings can be placed here, or redone after i2c
+ *      inspection of board info
+ *
+ *  This is a bit ugly, but should handle all memory moduels
+ *   used with the APOLLON. The first time though this code from s_init()
+ *   we configure the first chip select.  Later on we come back and
+ *   will configure the 2nd chip select if it exists.
+ *
+ **************************************************************************/
+void do_sdrc_init(u32 offset, u32 early)
+{
+}
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+	u32 mux = 0, mtype, mwidth, rev, tval;
+
+	rev = get_cpu_rev();
+	if (rev == CPU_2420_2422_ES1)
+		tval = 1;
+	else
+		tval = 0;	/* disable bit switched meaning */
+
+	/* global settings */
+	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
+	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
+	__raw_writel(tval, GPMC_TIMEOUT_CONTROL);	/* timeout disable */
+#ifdef CFG_NAND_BOOT
+	/* set nWP, disable limited addr */
+	__raw_writel(0x001, GPMC_CONFIG);
+#else
+	/* set nWP, disable limited addr */
+	__raw_writel(0x111, GPMC_CONFIG);
+#endif
+
+	/* discover bus connection from sysboot */
+	if (is_gpmc_muxed() == GPMC_MUXED)
+		mux = BIT9;
+	mtype = get_gpmc0_type();
+	mwidth = get_gpmc0_width();
+
+	/* setup cs0 */
+	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
+	sdelay(1000);
+
+#ifdef CFG_NOR_BOOT
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0);
+#else
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
+		     GPMC_CONFIG1_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);
+#endif
+	sdelay(2000);
+
+	/* setup cs1 */
+	__raw_writel(0, GPMC_CONFIG7_1);	/* disable any mapping */
+	sdelay(1000);
+
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_1, GPMC_CONFIG1_1);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1);
+	sdelay(2000);
+
+	/* setup cs2 */
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
+		     GPMC_CONFIG1_2);
+	/* It's same as cs 0 */
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_2);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_2);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2);
+#ifdef CFG_NOR_BOOT
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2);
+#else
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2);
+#endif
+
+#ifndef CFG_NOR_BOOT
+	/* setup cs3 */
+	__raw_writel(0, GPMC_CONFIG7_3);	/* disable any mapping */
+	sdelay(1000);
+
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_3);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_3);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_3);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_3);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_3);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_3);
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_3);
+#endif
+
+#ifndef ASYNC_NOR
+	__raw_writew(0xaa, (APOLLON_CS3_BASE + 0xaaa));
+	__raw_writew(0x55, (APOLLON_CS3_BASE + 0x554));
+	__raw_writew(0xc0, (APOLLON_CS3_BASE | SYNC_NOR_VALUE));
+#endif
+	sdelay(2000);
+}

board/apollon/mem.h

@@ -0,0 +1,170 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _APOLLON_OMAP24XX_MEM_H_
+#define _APOLLON_OMAP24XX_MEM_H_
+
+/* Slower full frequency range default timings for x32 operation*/
+#define APOLLON_2420_SDRC_SHARING		0x00000100
+#define APOLLON_2420_SDRC_MDCFG_0_DDR		0x00d04011
+#define APOLLON_2420_SDRC_MR_0_DDR		0x00000032
+
+/* optimized timings good for current shipping parts */
+#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz	0x4A59B485
+#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz	0x0000000C
+
+#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz	0x7BA35907
+#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz	0x00000013
+
+#define APOLLON_242X_SDRC_RFR_CTRL_100MHz	0x00030001
+#define APOLLON_242X_SDRC_RFR_CTRL_166MHz	0x00044C01
+
+#define APOLLON_242x_SDRC_DLLAB_CTRL_100MHz	0x00007306
+#define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz	0x00000506
+
+#ifdef PRCM_CONFIG_I
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0	APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0	APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
+#define APOLLON_2420_SDRC_RFR_CTRL	APOLLON_242X_SDRC_RFR_CTRL_166MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL	APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
+#elif PRCM_CONFIG_II
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0	APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0	APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
+#define APOLLON_2420_SDRC_RFR_CTRL	APOLLON_242X_SDRC_RFR_CTRL_100MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL	APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
+#endif
+
+/* GPMC settings */
+#ifdef PRCM_CONFIG_I		/* L3 at 165MHz */
+/* CS0: OneNAND */
+# define APOLLON_24XX_GPMC_CONFIG1_0	0x00000001
+# define APOLLON_24XX_GPMC_CONFIG2_0	0x000c1000
+# define APOLLON_24XX_GPMC_CONFIG3_0	0x00030400
+# define APOLLON_24XX_GPMC_CONFIG4_0	0x0b841006
+# define APOLLON_24XX_GPMC_CONFIG5_0	0x020f0c11
+# define APOLLON_24XX_GPMC_CONFIG6_0	0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_0	(0x00000e40|(APOLLON_CS0_BASE >> 24))
+
+/* CS1: Ethernet */
+# define APOLLON_24XX_GPMC_CONFIG1_1	0x00011200
+# define APOLLON_24XX_GPMC_CONFIG2_1	0x001F1F01
+# define APOLLON_24XX_GPMC_CONFIG3_1	0x00080803
+# define APOLLON_24XX_GPMC_CONFIG4_1	0x1C0b1C0a
+# define APOLLON_24XX_GPMC_CONFIG5_1	0x041F1F1F
+# define APOLLON_24XX_GPMC_CONFIG6_1	0x000004C4
+# define APOLLON_24XX_GPMC_CONFIG7_1	(0x00000F40|(APOLLON_CS1_BASE >> 24))
+
+/* CS2: OneNAND */
+/* It's same as CS0 */
+# define APOLLON_24XX_GPMC_CONFIG7_2	(0x00000e40|(APOLLON_CS2_BASE >> 24))
+
+/* CS3: NOR */
+#ifdef ASYNC_NOR
+# define APOLLON_24XX_GPMC_CONFIG1_3	0x00021201
+# define APOLLON_24XX_GPMC_CONFIG2_3	0x00121601
+# define APOLLON_24XX_GPMC_CONFIG3_3	0x00040401
+# define APOLLON_24XX_GPMC_CONFIG4_3	0x12061605
+# define APOLLON_24XX_GPMC_CONFIG5_3	0x01151317
+#else
+# define SYNC_NOR_VALUE			0x24aaa
+# define APOLLON_24XX_GPMC_CONFIG1_3	0xe5011211
+# define APOLLON_24XX_GPMC_CONFIG2_3	0x00090b01
+# define APOLLON_24XX_GPMC_CONFIG3_3	0x00020201
+# define APOLLON_24XX_GPMC_CONFIG4_3	0x09030b03
+# define APOLLON_24XX_GPMC_CONFIG5_3	0x010a0a0c
+#endif /* ASYNC_NOR */
+# define APOLLON_24XX_GPMC_CONFIG6_3	0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_3	(0x00000e40|(APOLLON_CS3_BASE >> 24))
+#endif /* endif PRCM_CONFIG_I */
+
+#ifdef PRCM_CONFIG_II		/* L3 at 100MHz */
+/* CS0: OneNAND */
+# define APOLLON_24XX_GPMC_CONFIG1_0	0x00000001
+# define APOLLON_24XX_GPMC_CONFIG2_0	0x00081080
+# define APOLLON_24XX_GPMC_CONFIG3_0	0x00030300
+# define APOLLON_24XX_GPMC_CONFIG4_0	0x08041004
+# define APOLLON_24XX_GPMC_CONFIG5_0	0x020b0910
+# define APOLLON_24XX_GPMC_CONFIG6_0	0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_0	(0x00000C40|(APOLLON_CS0_BASE >> 24))
+
+/* CS1: ethernet */
+# define APOLLON_24XX_GPMC_CONFIG1_1	0x00401203
+# define APOLLON_24XX_GPMC_CONFIG2_1	0x001F1F01
+# define APOLLON_24XX_GPMC_CONFIG3_1	0x00080803
+# define APOLLON_24XX_GPMC_CONFIG4_1	0x1C091C09
+# define APOLLON_24XX_GPMC_CONFIG5_1	0x041F1F1F
+# define APOLLON_24XX_GPMC_CONFIG6_1	0x000004C4
+# define APOLLON_24XX_GPMC_CONFIG7_1	(0x00000F40|(APOLLON_CS1_BASE >> 24))
+
+/* CS2: OneNAND */
+/* It's same as CS0 */
+# define APOLLON_24XX_GPMC_CONFIG7_2	(0x00000e40|(APOLLON_CS2_BASE >> 24))
+
+/* CS3: NOR */
+#define ASYNC_NOR
+#ifdef ASYNC_NOR
+# define APOLLON_24XX_GPMC_CONFIG1_3	0x00021201
+# define APOLLON_24XX_GPMC_CONFIG2_3	0x00121601
+# define APOLLON_24XX_GPMC_CONFIG3_3	0x00040401
+# define APOLLON_24XX_GPMC_CONFIG4_3	0x12061605
+# define APOLLON_24XX_GPMC_CONFIG5_3	0x01151317
+#else
+# define SYNC_NOR_VALUE			0x24aaa
+# define APOLLON_24XX_GPMC_CONFIG1_3	0xe1001202
+# define APOLLON_24XX_GPMC_CONFIG2_3	0x00151501
+# define APOLLON_24XX_GPMC_CONFIG3_3	0x00050501
+# define APOLLON_24XX_GPMC_CONFIG4_3	0x0e070e07
+# define APOLLON_24XX_GPMC_CONFIG5_3	0x01131F1F
+#endif /* ASYNC_NOR */
+# define APOLLON_24XX_GPMC_CONFIG6_3	0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_3	(0x00000C40|(APOLLON_CS3_BASE >> 24))
+#endif /* endif PRCM_CONFIG_II */
+
+#ifdef PRCM_CONFIG_III		/* L3 at 133MHz */
+# ifdef CFG_NAND_BOOT
+#  define APOLLON_24XX_GPMC_CONFIG1_0   0x0
+#  define APOLLON_24XX_GPMC_CONFIG2_0   0x00141400
+#  define APOLLON_24XX_GPMC_CONFIG3_0   0x00141400
+#  define APOLLON_24XX_GPMC_CONFIG4_0   0x0F010F01
+#  define APOLLON_24XX_GPMC_CONFIG5_0   0x010C1414
+#  define APOLLON_24XX_GPMC_CONFIG6_0   0x00000A80
+# else /* NOR boot */
+#  define APOLLON_24XX_GPMC_CONFIG1_0   0x3
+#  define APOLLON_24XX_GPMC_CONFIG2_0   0x00151501
+#  define APOLLON_24XX_GPMC_CONFIG3_0   0x00060602
+#  define APOLLON_24XX_GPMC_CONFIG4_0   0x10081008
+#  define APOLLON_24XX_GPMC_CONFIG5_0   0x01131F1F
+#  define APOLLON_24XX_GPMC_CONFIG6_0   0x000004c4
+# endif	/* endif CFG_NAND_BOOT */
+# define APOLLON_24XX_GPMC_CONFIG7_0	(0x00000C40|(APOLLON_CS0_BASE >> 24))
+# define APOLLON_24XX_GPMC_CONFIG1_1	0x00011000
+# define APOLLON_24XX_GPMC_CONFIG2_1	0x001f1f01
+# define APOLLON_24XX_GPMC_CONFIG3_1	0x00080803
+# define APOLLON_24XX_GPMC_CONFIG4_1	0x1C091C09
+# define APOLLON_24XX_GPMC_CONFIG5_1	0x041f1F1F
+# define APOLLON_24XX_GPMC_CONFIG6_1	0x000004C4
+# define APOLLON_24XX_GPMC_CONFIG7_1	(0x00000F40|(APOLLON_CS1_BASE >> 24))
+#endif /* endif CFG_PRCM_III */
+
+#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */

board/apollon/sys_info.c

@@ -0,0 +1,403 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mem.h>	/* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <i2c.h>
+
+/**************************************************************************
+ * get_prod_id() - get id info from chips
+ ***************************************************************************/
+static u32 get_prod_id(void)
+{
+	u32 p;
+	p = __raw_readl(PRODUCTION_ID);	/* get production ID */
+	return ((p & CPU_242X_PID_MASK) >> 16);
+}
+
+/**************************************************************************
+ * get_cpu_type() - low level get cpu type
+ * - no C globals yet.
+ * - just looking to say if this is a 2422 or 2420 or ...
+ * - to start with we will look at switch settings..
+ * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
+ *   (mux for 2420, non-mux for 2422).
+ ***************************************************************************/
+u32 get_cpu_type(void)
+{
+	u32 v;
+
+	switch (get_prod_id()) {
+	case 1:;		/* 2420 */
+	case 2:
+		return (CPU_2420);
+		break;		/* 2420 pop */
+	case 4:
+		return (CPU_2422);
+		break;
+	case 8:
+		return (CPU_2423);
+		break;
+	default:
+		break;		/* early 2420/2422's unmarked */
+	}
+
+	v = __raw_readl(TAP_IDCODE_REG);
+	v &= CPU_24XX_ID_MASK;
+	/* currently 2420 and 2422 have same id */
+	if (v == CPU_2420_CHIPID) {
+		if (is_gpmc_muxed() == GPMC_MUXED)	/* if mux'ed */
+			return (CPU_2420);
+		else
+			return (CPU_2422);
+	} else
+		return (CPU_2420);	/* don't know, say 2420 */
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+	u32 v;
+	v = __raw_readl(TAP_IDCODE_REG);
+	v = v >> 28;
+	return (v + 1);		/* currently 2422 and 2420 match up */
+}
+
+/****************************************************
+ * is_mem_sdr() - return 1 if mem type in use is SDR
+ ****************************************************/
+u32 is_mem_sdr(void)
+{
+	volatile u32 *burst = (volatile u32 *)(SDRC_MR_0 + SDRC_CS0_OSET);
+	if (*burst == H4_2420_SDRC_MR_0_SDR)
+		return (1);
+	return (0);
+}
+
+/***********************************************************
+ * get_mem_type() - identify type of mDDR part used.
+ * 2422 uses stacked DDR, 2 parts CS0/CS1.
+ * 2420 may have 1 or 2, no good way to know...only init 1...
+ * when eeprom data is up we can select 1 more.
+ *************************************************************/
+u32 get_mem_type(void)
+{
+	u32 cpu, sdr = is_mem_sdr();
+
+	cpu = get_cpu_type();
+	if (cpu == CPU_2422 || cpu == CPU_2423)
+		return (DDR_STACKED);
+
+	if (get_prod_id() == 0x2)
+		return (XDR_POP);
+
+	if (get_board_type() == BOARD_H4_MENELAUS)
+		if (sdr)
+			return (SDR_DISCRETE);
+		else
+			return (DDR_COMBO);
+	else if (sdr)		/* SDP + SDR kit */
+		return (SDR_DISCRETE);
+	else
+		return (DDR_DISCRETE);	/* origional SDP */
+}
+
+/***********************************************************************
+ * get_cs0_size() - get size of chip select 0/1
+ ************************************************************************/
+u32 get_sdr_cs_size(u32 offset)
+{
+	u32 size;
+	size = __raw_readl(SDRC_MCFG_0 + offset) >> 8;	/* get ram size field */
+	size &= 0x2FF;		/* remove unwanted bits */
+	size *= SZ_2M;		/* find size in MB */
+	return (size);
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ *  --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
+ *      when they are available we can get info from there.  This should
+ *      be correct of all known boards up until today.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+	return (BOARD_H4_SDP);
+}
+
+/******************************************************************
+ * get_sysboot_value() - get init word settings (dip switch on h4)
+ ******************************************************************/
+inline u32 get_sysboot_value(void)
+{
+	return (0x00000FFF & __raw_readl(CONTROL_STATUS));
+}
+
+/***************************************************************************
+ *  get_gpmc0_base() - Return current address hardware will be
+ *     fetching from. The below effectively gives what is correct, its a bit
+ *   mis-leading compared to the TRM.  For the most general case the mask
+ *   needs to be also taken into account this does work in practice.
+ *   - for u-boot we currently map:
+ *       -- 0 to nothing,
+ *       -- 4 to flash
+ *       -- 8 to enent
+ *       -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+	u32 b;
+
+	b = __raw_readl(GPMC_CONFIG7_0);
+	b &= 0x1F;		/* keep base [5:0] */
+	b = b << 24;		/* ret 0x0b000000 */
+	return (b);
+}
+
+/*****************************************************************
+ *  is_gpmc_muxed() - tells if address/data lines are multiplexed
+ *****************************************************************/
+u32 is_gpmc_muxed(void)
+{
+	u32 mux;
+	mux = get_sysboot_value();
+	if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
+		return (GPMC_MUXED);	/* NAND Boot mode */
+	if (mux & BIT1)		/* if mux'ed */
+		return (GPMC_MUXED);
+	else
+		return (GPMC_NONMUXED);
+}
+
+/************************************************************************
+ *  get_gpmc0_type() - read sysboot lines to see type of memory attached
+ ************************************************************************/
+u32 get_gpmc0_type(void)
+{
+	u32 type;
+	type = get_sysboot_value();
+	if ((type & (BIT3 | BIT2)) == (BIT3 | BIT2))
+		return (TYPE_NAND);
+	else
+		return (TYPE_NOR);
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+	u32 width;
+	width = get_sysboot_value();
+	if ((width & 0xF) == (BIT3 | BIT2))
+		return (WIDTH_8BIT);
+	else
+		return (WIDTH_16BIT);
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ *   volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
+	u32 i = 0, val;
+	do {
+		++i;
+		val = __raw_readl(read_addr) & read_bit_mask;
+		if (val == match_value)
+			return (1);
+		if (i == bound)
+			return (0);
+	} while (1);
+}
+
+/*********************************************************************
+ *  display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+	char cpu_2420[] = "2420";	/* cpu type */
+	char cpu_2422[] = "2422";
+	char cpu_2423[] = "2423";
+	char db_men[] = "Menelaus";	/* board type */
+	char db_ip[] = "IP";
+	char mem_sdr[] = "mSDR";	/* memory type */
+	char mem_ddr[] = "mDDR";
+	char t_tst[] = "TST";	/* security level */
+	char t_emu[] = "EMU";
+	char t_hs[] = "HS";
+	char t_gp[] = "GP";
+	char unk[] = "?";
+
+	char *cpu_s, *db_s, *mem_s, *sec_s;
+	u32 cpu, rev, sec;
+
+	rev = get_cpu_rev();
+	cpu = get_cpu_type();
+	sec = get_device_type();
+
+	if (is_mem_sdr())
+		mem_s = mem_sdr;
+	else
+		mem_s = mem_ddr;
+
+	if (cpu == CPU_2423)
+		cpu_s = cpu_2423;
+	else if (cpu == CPU_2422)
+		cpu_s = cpu_2422;
+	else
+		cpu_s = cpu_2420;
+
+	if (btype == BOARD_H4_MENELAUS)
+		db_s = db_men;
+	else
+		db_s = db_ip;
+
+	switch (sec) {
+	case TST_DEVICE:
+		sec_s = t_tst;
+		break;
+	case EMU_DEVICE:
+		sec_s = t_emu;
+		break;
+	case HS_DEVICE:
+		sec_s = t_hs;
+		break;
+	case GP_DEVICE:
+		sec_s = t_gp;
+		break;
+	default:
+		sec_s = unk;
+	}
+
+	printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1);
+	printf("Samsung Apollon SDP Base Board + %s \n", mem_s);
+}
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ *          0 = 242x IP platform (first 2xx boards)
+ *          1 = 242x Menelaus platfrom.
+ *************************************************************************/
+u32 get_board_rev(void)
+{
+	u32 rev = 0;
+	u32 btype = get_board_type();
+
+	if (btype == BOARD_H4_MENELAUS)
+		rev = 1;
+	return (rev);
+}
+
+/********************************************************
+ *  get_base(); get upper addr of current execution
+ *******************************************************/
+u32 get_base(void)
+{
+	u32 val;
+	__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+	val &= 0xF0000000;
+	val >>= 28;
+	return (val);
+}
+
+/********************************************************
+ *  get_base2(); get 2upper addr of current execution
+ *******************************************************/
+u32 get_base2(void)
+{
+	u32 val;
+	__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+	val &= 0xFF000000;
+	val >>= 24;
+	return (val);
+}
+
+/********************************************************
+ *  running_in_flash() - tell if currently running in
+ *   flash.
+ *******************************************************/
+u32 running_in_flash(void)
+{
+	if (get_base() < 4)
+		return (1);	/* in flash */
+	return (0);		/* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ *  running_in_sram() - tell if currently running in
+ *   sram.
+ *******************************************************/
+u32 running_in_sram(void)
+{
+	if (get_base() == 4)
+		return (1);	/* in SRAM */
+	return (0);		/* running in FLASH or SDRAM */
+}
+
+/********************************************************
+ *  running_in_sdram() - tell if currently running in
+ *   flash.
+ *******************************************************/
+u32 running_in_sdram(void)
+{
+	if (get_base() > 4)
+		return (1);	/* in sdram */
+	return (0);		/* running in SRAM or FLASH */
+}
+
+/*************************************************************
+ *  running_from_internal_boot() - am I a signed NOR image.
+ *************************************************************/
+u32 running_from_internal_boot(void)
+{
+	u32 v, base;
+
+	v = get_sysboot_value() & BIT3;
+	base = get_base2();
+	/* if running at mask rom flash address and
+	 * sysboot3 says this was an internal boot
+	 */
+	if ((base == 0x08) && v)
+		return (1);
+	else
+		return (0);
+}
+
+/*************************************************************
+ *  get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+	int mode;
+	mode = __raw_readl(CONTROL_STATUS) & (BIT10 | BIT9 | BIT8);
+	return (mode >>= 8);
+}

board/apollon/u-boot.lds

@@ -0,0 +1,63 @@
+/*
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungin Park <kyugnmin.park@samsung.com>
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	:
+	{
+		cpu/arm1136/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss (NOLOAD) : { *(.bss) }
+	_end = .;
+}

board/armadillo/u-boot.lds

@@ -50,6 +50,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) }
 	_end = .;
 }

board/assabet/u-boot.lds

@@ -53,6 +53,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) }
 	_end = .;
 }

board/at91rm9200dk/u-boot.lds

@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) }
 	_end = .;
 }

board/atmel/atstk1000/u-boot.lds

@@ -71,7 +71,7 @@ SECTIONS
 	. = ALIGN(8);
 	_edata = .;
 
-	.bss : {
+	.bss (NOLOAD) : {
 		*(.bss)
 		*(.bss.*)
 	}

board/atum8548/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+
+SOBJS	:= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/atum8548/atum8548.c

@@ -0,0 +1,420 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+long int fixed_sdram(void);
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+
+	if ((uint)&gur->porpllsr != 0xe00e0000) {
+		printf("immap size error %x\n",&gur->porpllsr);
+	}
+	printf ("Board: ATUM8548\n");
+
+	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
+	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
+	ecm->eedr = 0xffffffff;		/* Clear ecm errors */
+	ecm->eeer = 0xffffffff;		/* Enable ecm errors */
+
+	return 0;
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+	ddr->sdram_mode = CFG_DDR_MODE;
+	ddr->sdram_interval = CFG_DDR_INTERVAL;
+    #if defined (CONFIG_DDR_ECC)
+	ddr->err_disable = 0x0000000D;
+	ddr->err_sbe = 0x00ff0000;
+    #endif
+	asm("sync;isync;msync");
+	udelay(500);
+    #if defined (CONFIG_DDR_ECC)
+	/* Enable ECC checking */
+	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+    #else
+	ddr->sdram_cfg = CFG_DDR_CONTROL;
+    #endif
+	asm("sync; isync; msync");
+	udelay(500);
+	return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+#endif	/* !defined(CONFIG_SPD_EEPROM) */
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+	puts("Initializing\n");
+
+#if defined(CONFIG_SPD_EEPROM)
+	puts("spd_sdram\n");
+	dram_size = spd_sdram ();
+#else
+	puts("fixed_sdram\n");
+	dram_size = fixed_sdram ();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+	puts("    DDR: ");
+	return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+	       CFG_MEMTEST_START,
+	       CFG_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++) {
+		printf ("DRAM test attempting to write 0xaaaaaaaa at: %08x\n", (uint) p);
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif
+
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+int first_free_busno=0;
+
+void
+pci_init_board(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+	debug ("   pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+		devdisr, io_sel, host_agent);
+
+	/* explicitly set 'Clock out select register' to echo SYSCLK input to our CPLD */
+	gur->clkocr  |= MPC85xx_ATUM_CLKOCR;
+
+	if (io_sel & 1) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+			printf ("    eTSEC1 is in sgmii mode.\n");
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+			printf ("    eTSEC2 is in sgmii mode.\n");
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+			printf ("    eTSEC3 is in sgmii mode.\n");
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+			printf ("    eTSEC4 is in sgmii mode.\n");
+	}
+
+#ifdef CONFIG_PCIE1
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep = (host_agent == 5);
+	int pcie_configured  = io_sel & 6;
+
+	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE1 connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE1_MEM_BASE,
+			       CFG_PCIE1_MEM_PHYS,
+			       CFG_PCIE1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE1_IO_BASE,
+			       CFG_PCIE1_IO_PHYS,
+			       CFG_PCIE1_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+#ifdef CFG_PCIE1_MEM_BASE2
+		/* outbound memory */
+		pci_set_region(hose->regions + 3,
+			       CFG_PCIE1_MEM_BASE2,
+			       CFG_PCIE1_MEM_PHYS2,
+			       CFG_PCIE1_MEM_SIZE2,
+			       PCI_REGION_MEM);
+		hose->region_count++;
+#endif
+		hose->first_busno=first_free_busno;
+
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno=hose->last_busno+1;
+		printf("    PCIE1 on bus %02x - %02x\n",
+		       hose->first_busno,hose->last_busno);
+
+	} else {
+		printf ("    PCIE1: disabled\n");
+	}
+
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+
+	uint pci_agent = (host_agent == 6);
+	uint pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("\n    PCI1: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter",
+			(uint)pci
+			);
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCI1_MEM_BASE,
+			       CFG_PCI1_MEM_PHYS,
+			       CFG_PCI1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCI1_IO_BASE,
+			       CFG_PCI1_IO_PHYS,
+			       CFG_PCI1_IO_SIZE,
+			       PCI_REGION_IO);
+		hose->region_count = 3;
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("PCI1 on bus %02x - %02x\n",
+			hose->first_busno,hose->last_busno);
+	} else {
+		printf ("    PCI1: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCI2
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci2_hose;
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI2)) {
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		pci_set_region(hose->regions + 1,
+			       CFG_PCI2_MEM_BASE,
+			       CFG_PCI2_MEM_PHYS,
+			       CFG_PCI2_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		pci_set_region(hose->regions + 2,
+			       CFG_PCI2_IO_BASE,
+			       CFG_PCI2_IO_PHYS,
+			       CFG_PCI2_IO_SIZE,
+			       PCI_REGION_IO);
+		hose->region_count = 3;
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("PCI2 on bus %02x - %02x\n",
+			hose->first_busno,hose->last_busno);
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI2;
+#endif
+}
+
+
+int last_stage_init(void)
+{
+	int ic = icache_status ();
+	printf ("icache_status: %d\n", ic);
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	ft_cpu_setup(blob, bd);
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI1
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_PCI2
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_PCIE1
+		path = fdt_getprop(blob, node, "pci2", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
+}
+#endif

board/atum8548/config.mk

@@ -0,0 +1,33 @@
+#
+# Copyright 2004, 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# atum8548 board
+# TEXT_BASE = 0xfff80000
+# TEXT_BASE = 0xfffff000
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1

board/atum8548/init.S

@@ -0,0 +1,235 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define LAWAR_TRGT_PCI1		0x00000000
+#define LAWAR_TRGT_PCI2		0x00100000
+#define LAWAR_TRGT_PCIE		0x00200000
+#define LAWAR_TRGT_DDR		0x00f00000
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define	entry_start \
+	mflr	r1	;	\
+	bl	0f	;
+
+#define	entry_end \
+0:	mflr	r0	;	\
+	mtlr	r1	;	\
+	blr		;
+
+
+	.section	.bootpg, "ax"
+	.globl	tlb1_entry
+tlb1_entry:
+	entry_start
+
+	/*
+	 * Number of TLB0 and TLB1 entries in the following table
+	 */
+	.long (2f-1f)/16
+
+1:
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	/*
+	 * TLB0		4K	Non-cacheable, guarded
+	 * 0xff700000	4K	Initial CCSRBAR mapping
+	 *
+	 * This ends up at a TLB0 Index==0 entry, and must not collide
+	 * with other TLB0 Entries.
+	 */
+	.long FSL_BOOKE_MAS0(0, 0, 0)
+	.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+	.long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+	/*
+	 * TLB0		16K	Cacheable, guarded
+	 * Temporary Global data for initialization
+	 *
+	 * Use four 4K TLB0 entries.  These entries must be cacheable
+	 * as they provide the bootstrap memory before the memory
+	 * controler and real memory have been configured.
+	 *
+	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+	 * and must not collide with other TLB0 entries.
+	 */
+	.long FSL_BOOKE_MAS0(0, 0, 0)
+	.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+	.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, MAS2_G)
+	.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+	.long FSL_BOOKE_MAS0(0, 0, 0)
+	.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+	.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, MAS2_G)
+	.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0,
+			(MAS3_SX|MAS3_SW|MAS3_SR))
+
+	.long FSL_BOOKE_MAS0(0, 0, 0)
+	.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+	.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, MAS2_G)
+	.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0,
+			(MAS3_SX|MAS3_SW|MAS3_SR))
+
+	.long FSL_BOOKE_MAS0(0, 0, 0)
+	.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+	.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, MAS2_G)
+	.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0,
+			(MAS3_SX|MAS3_SW|MAS3_SR))
+
+	/* TLB 1 Initializations */
+	/*
+	 * TLB 0, 1:	128M	Non-cacheable, guarded
+	 * 0xf8000000	128M	FLASH
+	 * Out of reset this entry is only 4K.
+	 */
+	.long FSL_BOOKE_MAS0(1, 0, 0)
+	.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x4000000, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x4000000, 0,
+			(MAS3_SX|MAS3_SW|MAS3_SR))
+
+	.long FSL_BOOKE_MAS0(1, 1, 0)
+	.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+	/*
+	 * TLB 2:	1G	Non-cacheable, guarded
+	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
+	 */
+	.long FSL_BOOKE_MAS0(1, 2, 0)
+	.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+	.long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+	/*
+	 * TLB 3, 4:	512M	Non-cacheable, guarded
+	 * 0xc0000000	1G	PCI2
+	 */
+	.long FSL_BOOKE_MAS0(1, 3, 0)
+	.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long FSL_BOOKE_MAS2(CFG_PCI2_MEM_PHYS, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_PCI2_MEM_PHYS,	0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+	.long FSL_BOOKE_MAS0(1, 4, 0)
+	.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long FSL_BOOKE_MAS2(CFG_PCI2_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_PCI2_MEM_PHYS + 0x10000000, 0,
+			(MAS3_SX|MAS3_SW|MAS3_SR))
+
+	/*
+	 * TLB 5:	64M	Non-cacheable, guarded
+	 * 0xe000_0000	1M	CCSRBAR
+	 * 0xe200_0000	1M	PCI1 IO
+	 * 0xe210_0000	1M	PCI2 IO
+	 * 0xe300_0000	1M	PCIe IO
+	 */
+	.long FSL_BOOKE_MAS0(1, 5, 0)
+	.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+	.long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+2:
+	entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000	   0x7fff_ffff	   DDR			   2G
+ * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
+ * 0xa000_0000	   0xbfff_ffff	   PCIe MEM		   512M
+ * 0xc000_0000	   0xdfff_ffff	   PCI2 MEM		   512M
+ * 0xe000_0000	   0xe000_ffff	   CCSR			   1M
+ * 0xe200_0000	   0xe10f_ffff	   PCI1 IO		   1M
+ * 0xe280_0000	   0xe20f_ffff	   PCI2 IO		   1M
+ * 0xe300_0000	   0xe30f_ffff	   PCIe IO		   1M
+ * 0xf800_0000	   0xffff_ffff	   FLASH (boot bank)	   128M
+ *
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * LAW 0 is reserved for boot mapping
+ */
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	entry_start
+
+	.long (4f-3f)/8
+3:
+	.long  0
+	.long  (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_1G)) & ~LAWAR_EN
+
+	.long	(CFG_PCI1_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+	.long	(CFG_PCI1_IO_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+
+	.long	(CFG_PCI2_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+	.long	(CFG_PCI2_IO_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+
+	.long	(CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+	.long	(CFG_PCIE1_IO_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
+
+	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+	.long	(CFG_LBC_CACHE_BASE>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+
+4:
+	entry_end

board/atum8548/u-boot.lds

@@ -0,0 +1,147 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+    board/atum8548/init.o (.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc85xx/start.o	(.text)
+    board/atum8548/init.o (.text)
+    cpu/mpc85xx/traps.o (.text)
+    cpu/mpc85xx/interrupts.o (.text)
+    cpu/mpc85xx/cpu_init.o (.text)
+    cpu/mpc85xx/cpu.o (.text)
+    cpu/mpc85xx/speed.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/c2mon/u-boot.lds

@@ -129,7 +129,7 @@ SECTIONS
   __init_end = .;
 
   __bss_start = .;
-  .bss       :
+  .bss (NOLOAD)       :
   {
    *(.sbss) *(.scommon)
    *(.dynbss)

board/cerf250/u-boot.lds

@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) }
 	_end = .;
 }

board/cm4008/u-boot.lds

@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) }
 	_end = .;
 }