Merge git://www.denx.de/git/u-boot

Conflicts:

	drivers/Makefile

.gitignore

@@ -0,0 +1,13 @@
+*.orig
+*.a
+*.o
+*.depend
+System.map
+/u-boot
+/u-boot.map
+/u-boot.bin
+/u-boot.srec
+/LOG
+/errlog
+/reloc_off
+

MAKEALL

@@ -301,10 +301,12 @@ LIST_83xx="		\
 	MPC8313ERDB_66	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
+	MPC832XEMDS_ATM	\
 	MPC8349EMDS	\
 	MPC8349ITX	\
 	MPC8349ITXGP	\
 	MPC8360EMDS	\
+	MPC8360EMDS_ATM	\
 	sbc8349		\
 	TQM834x		\
 "
@@ -552,6 +554,7 @@ LIST_mips5kc_el=""
 
 LIST_au1xx0_el="	\
 	dbau1550_el	\
+	pb1000		\
 "
 
 LIST_mips_el="			\

Makefile

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -24,7 +24,7 @@
 VERSION = 1
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -214,6 +214,7 @@ LIBS += drivers/libdrivers.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/nand/libnand.a
 LIBS += drivers/nand_legacy/libnand_legacy.a
+LIBS += drivers/onenand/libonenand.a
 LIBS += drivers/net/libnet.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
@@ -1735,9 +1736,13 @@ M54455EVB_i66_config :	unconfig
 	>include/config.h ; \
 	if [ "$${FLASH}" == "INTEL" ] ; then \
 		echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		echo "... with INTEL boot..." ; \
 	else \
 		echo "#define CFG_ATMEL_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		echo "... with ATMEL boot..." ; \
 	fi; \
 	echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
@@ -1768,7 +1773,8 @@ MPC8323ERDB_config:	unconfig
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config:	unconfig
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1783,10 +1789,17 @@ MPC832XEMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
 
@@ -1810,7 +1823,8 @@ MPC8349ITXGP_config:	unconfig
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config:	unconfig
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1825,10 +1839,17 @@ MPC8360EMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
 

README

@@ -2123,7 +2123,7 @@ to save the current settings.
 	to be a good choice since it makes it far enough from the
 	start of the data area as well as from the stack pointer.
 
-Please note that the environment is read-only as long as the monitor
+Please note that the environment is read-only until the monitor
 has been relocated to RAM and a RAM copy of the environment has been
 created; also, when using EEPROM you will have to use getenv_r()
 until then to read environment variables.

blackfin_config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__BLACKFIN__

board/ads5121/u-boot.lds

@@ -51,6 +51,7 @@ SECTIONS
   {
     cpu/mpc512x/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)

board/amcc/luan/luan.c

@@ -39,8 +39,6 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  ************************************************************************/
 int board_early_init_f(void)
 {
-	volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
-
 	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
 	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
 	mtebc( pb1ap,  0x03800000 );
@@ -66,8 +64,6 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
-	x->ethuart &= ~EPLD2_RESET_ETH_N; /* put Ethernet+PHY in reset */
-
 	return  0;
 }
 
@@ -79,7 +75,18 @@ int board_early_init_f(void)
 int misc_init_r(void)
 {
 	volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
-	x->ethuart |= EPLD2_RESET_ETH_N; /* take Ethernet+PHY out of reset */
+
+	/* set modes of operation */
+	x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
+		EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
+	/* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
+	x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
+
+	/* put Ethernet+PHY in reset */
+	x->ethuart &= ~EPLD2_RESET_ETH_N;
+	udelay(10000);
+	/* take Ethernet+PHY out of reset */
+	x->ethuart |= EPLD2_RESET_ETH_N;
 
 	return  0;
 }

board/amcc/sequoia/cmd_sequoia.c

@@ -25,6 +25,7 @@
 #include <common.h>
 #include <command.h>
 #include <i2c.h>
+#include <asm/io.h>
 
 /*
  * There are 2 versions of production Sequoia & Rainier platforms.
@@ -39,7 +40,7 @@
  * All Sequoias & Rainiers select from two possible EEPROMs in Boot
  * Config F. One for 33MHz PCI, one for 66MHz PCI. The following
  * values are for the 33MHz PCI configuration. Byte 5 (0 base) is
- * the only  value affected for a 66MHz PCI and simply needs a +0x10.
+ * the only value affected for a 33MHz PCI and simply needs a | 0x08.
  */
 
 #define NAND_COMPATIBLE	0x01
@@ -56,6 +57,7 @@ static char *config_labels[] = {
 	"CPU: 416 PLB: 166 OPB: 83 EBC: 55",
 	"CPU: 500 PLB: 166 OPB: 83 EBC: 55",
 	"CPU: 533 PLB: 133 OPB: 66 EBC: 66",
+	"CPU: 667 PLB: 133 OPB: 66 EBC: 66",
 	"CPU: 667 PLB: 166 OPB: 83 EBC: 55",
 	NULL
 };
@@ -96,6 +98,11 @@ static u8 boot_configs[][17] = {
 		0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40,
 		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
 	},
+	{
+		(NOR_COMPATIBLE),
+		0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
 	{
 		(NAND_COMPATIBLE | NOR_COMPATIBLE),
 		0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40,
@@ -200,8 +207,12 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	/* check CPLD register +5 for PCI 66MHz flag */
-	if (in8(CFG_BCSR_BASE + 5) & 0x01)
+	if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
-		buf[5] += 0x10;
+		/*
+		 * PLB-to-PCI divisor = 3 for 33MHz sync PCI
+		 * instead of 2 for 66MHz systems
+		 */
+		buf[5] |= 0x08;
 
 	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);

board/amcc/sequoia/sequoia.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
@@ -24,6 +24,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <ppc440.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -362,8 +363,8 @@ int checkboard(void)
 	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 #endif
 
-	rev = in8(CFG_BCSR_BASE + 0);
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
-	val = in8(CFG_BCSR_BASE + 5) & 0x01;
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {

board/amcc/yosemite/yosemite.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,6 +24,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <spd_sdram.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -181,8 +184,8 @@ int checkboard(void)
 	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
 #endif
 
-	rev = *(u8 *)(CFG_CPLD + 0);
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
-	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {

board/at91rm9200dk/led.c

@@ -66,7 +66,7 @@ void	red_LED_off(void)
 }
 
 
-void LED_init (void)
+void coloured_LED_init (void)
 {
 	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
 	AT91PS_PMC	PMC	= AT91C_BASE_PMC;

board/atmel/atstk1000/flash.c

@@ -55,10 +55,6 @@ unsigned long flash_init(void)
 	unsigned long addr;
 	unsigned int i;
 
-	gd->bd->bi_flashstart = CFG_FLASH_BASE;
-	gd->bd->bi_flashsize = CFG_FLASH_SIZE;
-	gd->bd->bi_flashoffset = _edata - _text;
-
 	flash_info[0].size = CFG_FLASH_SIZE;
 	flash_info[0].sector_count = 135;
 

board/cds/common/ft_board.c

@@ -37,6 +37,10 @@ static void cds_pci_fixup(void *blob)
 
 	map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
 
+	if (!map)
+		map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len);
+
+	if (map) {
 		len /= sizeof(u32);
 
 		slot = get_pci_slot();
@@ -49,6 +53,9 @@ static void cds_pci_fixup(void *blob)
 
 			map+=7;
 		}
+	} else {
+		printf("*** Warning - No PCI node found\n");
+	}
 }
 #endif
 

board/cm5200/cm5200.c

@@ -397,6 +397,7 @@ int misc_init_r(void)
 					"operational\n");
 
 	/* set the hostname appropriate to the module we're running on */
+	hostname[0] = 0x00;
 	compose_hostname(hw_id, hostname);
 	setenv("hostname", hostname);
 

board/cogent/u-boot.lds

@@ -55,6 +55,7 @@ SECTIONS
   {
     *(.text)
     common/environment.o(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;

board/dbau1x00/dbau1x00.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -77,6 +78,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */

board/dbau1x00/u-boot.lds

@@ -43,21 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/freescale/common/pixis.c

@@ -207,13 +207,16 @@ void read_from_px_regs_altbank(int set)
 	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
 }
 
+#ifndef CFG_PIXIS_VBOOT_MASK
+#define CFG_PIXIS_VBOOT_MASK	0x40
+#endif
 
 void set_altbank(void)
 {
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp ^= 0x40;
+	tmp ^= CFG_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }

board/freescale/common/pq-mds-pib.c

@@ -79,19 +79,19 @@ int pib_init(void)
 
 	printf("QOC3 ATM card on PMC0\n");
 #elif defined(CONFIG_MPC832XEMDS)
-	val = 0;
+	val8 = 0;
-	i2c_write(0x26, 0x7, 1, &val, 1);
+	i2c_write(0x26, 0x7, 1, &val8, 1);
-	val = 0xf7;
+	val8 = 0xf7;
-	i2c_write(0x26, 0x3, 1, &val, 1);
+	i2c_write(0x26, 0x3, 1, &val8, 1);
 
-	val = 0;
+	val8 = 0;
-	i2c_write(0x21, 0x6, 1, &val, 1);
+	i2c_write(0x21, 0x6, 1, &val8, 1);
-	i2c_write(0x21, 0x7, 1, &val, 1);
+	i2c_write(0x21, 0x7, 1, &val8, 1);
 
-	val = 0xdf;
+	val8 = 0xdf;
-	i2c_write(0x21, 0x2, 1, &val, 1);
+	i2c_write(0x21, 0x2, 1, &val8, 1);
-	val = 0xef;
+	val8 = 0xef;
-	i2c_write(0x21, 0x3, 1, &val, 1);
+	i2c_write(0x21, 0x3, 1, &val8, 1);
 
 	eieio();
 

board/freescale/m54455evb/config.mk

@@ -22,4 +22,6 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)

board/freescale/m54455evb/u-boot.atm

@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5445x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/freescale/m54455evb/u-boot.int

@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5445x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/freescale/mpc8544ds/mpc8544ds.c

@@ -227,7 +227,7 @@ pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32(CFG_PCIE3_MEM_BASE);
+		in_be32((u32 *)CFG_PCIE3_MEM_BASE);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}

board/gth2/gth2.c

@@ -26,14 +26,13 @@
 #include <asm/au1x00.h>
 #include <asm/addrspace.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 #include <watchdog.h>
 
 #include "ee_access.h"
 
 static int wdi_status = 0;
 
-unsigned long mips_io_port_base = 0;
-
 #define SDRAM_SIZE ((64*1024*1024)-(12*4096))
 
 
@@ -147,6 +146,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* PCMCIA is on a 36 bit physical address.
 	   We need to map it into a 32 bit addresses */
@@ -429,7 +431,7 @@ int misc_init_r(void){
 	    (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
 		printf ("*** ethernet addr invalid, using default ***\n");
 	} else {
-		setenv ("ethaddr", Rx);
+		setenv ("ethaddr", (char *)Rx);
 	}
 	return (0);
 }

board/gth2/lowlevel_init.S

@@ -413,7 +413,9 @@ noCacheJump:
 	j clearmem
 	nop
 
+#if 0
 	.globl	memtest
+#endif
 memtest:
 	/* Fill memory with address */
 	li	t0, 0x80000000
@@ -434,7 +436,9 @@ mt1:	lw	t2, 0(t0)
 	bne	t1, zero, mt1
 	nop
 	nop
+#if 0
 	.globl	clearmem
+#endif
 clearmem:
 		/* Clear memory */
 	li	t0, 0x80000000

board/gth2/u-boot.lds

@@ -43,20 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
+	. = .;
-	.sdata  : { *(.sdata) }
+	_gp = ALIGN(16) + 0x7ff0;
-
-	_gp = ALIGN(16);
 
+	.got : {
 	  __got_start = .;
-	.got  : { *(.got) }
+	  *(.got)
 	  __got_end = .;
+	}
 
 	.sdata  : { *(.sdata) }
 
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/hymod/u-boot.lds

@@ -69,6 +69,7 @@ SECTIONS
     common/environment.o(.text)
 
     *(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;

board/ids8247/ids8247.c

@@ -25,6 +25,12 @@
 #include <ioports.h>
 #include <mpc8260.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -38,12 +44,12 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
+	/* PA31 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
-	/* PA30 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
+	/* PA30 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
-	/* PA29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
+	/* PA29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
-	/* PA28 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
+	/* PA28 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
-	/* PA27 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
+	/* PA27 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
-	/* PA26 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
+	/* PA26 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
 	/* PA25 */ {   0,   0,	 0,   0,   1,	0   }, /* 8247_P0 */
 #if defined(CONFIG_SOFT_I2C)
 	/* PA24 */ {   1,   0,	 0,   0,   1,	1   }, /* I2C_SDA2 */
@@ -53,14 +59,14 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PA23 */ {   0,   0,	 0,   1,   0,	0   }, /* PA23 */
 #endif
 	/* PA22 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_DCD */
-	/* PA21 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
+	/* PA21 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
-	/* PA20 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
+	/* PA20 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
-	/* PA19 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
+	/* PA19 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
-	/* PA18 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
+	/* PA18 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
-	/* PA17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
+	/* PA17 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
-	/* PA16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
+	/* PA16 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
-	/* PA15 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
+	/* PA15 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
-	/* PA14 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
+	/* PA14 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
 	/* PA13 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_RTS */
 	/* PA12 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_CTS */
 	/* PA11 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_DTR */
@@ -79,20 +85,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
+	/* PB31 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
+	/* PB30 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
+	/* PB29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
+	/* PB28 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
+	/* PB27 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
+	/* PB26 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
+	/* PB25 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
+	/* PB24 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
+	/* PB23 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
+	/* PB22 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
+	/* PB21 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
+	/* PB20 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
+	/* PB19 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
+	/* PB18 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
 	/* PB17 */ {   0,   0,	 0,   0,   0,	0   }, /* PB17 */
 	/* PB16 */ {   0,   0,	 0,   0,   0,	0   }, /* PB16 */
 	/* PB15 */ {   0,   0,	 0,   0,   0,	0   }, /* PB15 */
@@ -123,8 +129,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
 	/* PC25 */ {   0,   1,	 1,   0,   0,	0   }, /* SYNC_IN */
 	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
-	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
+	/* PC23 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII TX_CLK */
-	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
+	/* PC22 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII RX_CLK */
 	/* PC21 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
 	/* PC20 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
 	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK */
@@ -180,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
 	/* PD9	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD9 */
 	/* PD8	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD8 */
-	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
+	/* PD7	*/ {   1,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
 	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
 	/* PD5	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD5 */
 	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */
@@ -224,7 +230,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 * mapped by the controller. That means, that the initial mapping has
 	 * to be (at least) twice as large as the maximum expected size.
 	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
+	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
 
 	sdmr_ptr = &memctl->memc_psdmr;
 	orx_ptr = &memctl->memc_or2;
@@ -315,4 +321,38 @@ nand_init (void)
 	printf ("%4lu MB\n", totlen >>20);
 }
 
-#endif
+#endif	/* CFG_CMD_NAND */
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update(void *blob, bd_t *bd)
+{
+	int ret, nodeoffset = 0;
+	ulong memory_data[2] = {0};
+
+	memory_data[0] = cpu_to_be32(bd->bi_memstart);
+	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+
+	nodeoffset = fdt_find_node_by_path (blob, "/memory");
+	if (nodeoffset >= 0) {
+		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
+					sizeof(memory_data));
+	if (ret < 0)
+		printf("ft_blob_update): cannot set /memory/reg "
+			"property err:%s\n", fdt_strerror(ret));
+	}
+	else {
+		/* memory node is required in dts */
+		printf("ft_blob_update(): cannot find /memory node "
+		"err:%s\n", fdt_strerror(nodeoffset));
+	}
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup( blob, bd);
+	ft_blob_update(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

board/incaip/incaip.c

@@ -25,7 +25,7 @@
 #include <command.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
-
+#include <asm/io.h>
 
 extern uint incaip_get_cpuclk(void);
 
@@ -85,7 +85,6 @@ long int initdram(int board_type)
 
 int checkboard (void)
 {
-
 	unsigned long chipid = *INCA_IP_WDT_CHIPID;
 	int part_num;
 
@@ -107,5 +106,7 @@ int checkboard (void)
 
 	printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }

board/incaip/u-boot.lds

@@ -43,21 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/innokom/innokom.c

@@ -72,7 +72,7 @@ int i2c_init_board(void)
 
 int misc_init_r(void)
 {
-	uchar *str;
+	char *str;
 
 	/* determine if the software update key is pressed during startup   */
 	if (GPLR0 & 0x00000800) {

board/lwmon5/lwmon5.c

@@ -96,6 +96,23 @@ int board_early_init_f(void)
 
 	gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
 
+	/*
+	 * Reset PHY's:
+	 * The PHY's need a 2nd reset pulse, since the MDIO address is latched
+	 * upon reset, and with the first reset upon powerup, the addresses are
+	 * not latched reliable, since the IRQ line is multiplexed with an
+	 * MDIO address. A 2nd reset at this time will make sure, that the
+	 * correct address is latched.
+	 */
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
 	return 0;
 }
 
@@ -230,15 +247,6 @@ int misc_init_r(void)
 	/* Write lime controller memory parameters */
 	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
 
-	/*
-	 * Reset PHY's
-	 */
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
-	udelay(100);
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
-
 	/*
 	 * Init display controller
 	 */

board/m5282evb/m5282evb.c

@@ -89,4 +89,5 @@ long int initdram (int board_type)
 		/* Write to the SDRAM Mode Register */
 		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
 	}
+	return dramsize;
 }

board/motionpro/motionpro.c

@@ -138,6 +138,12 @@ long int initdram(int board_type)
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
 
+	/* According to AN3221 (MPC5200B SDRAM Initialization and
+	 * Configuration), the SDelay register must be written a value of
+	 * 0x00000004 as the first step of the SDRAM contorller configuration.
+	 */
+	*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+
 	/* configure SDRAM start/end for detection */
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */

board/mousse/u-boot.lds

@@ -60,6 +60,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_generic/zlib.o		(.text)
 
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)

board/mpl/vcma9/flash.c

@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/mpl/vcma9/vcma9.c

@@ -288,7 +288,7 @@ int dram_init(void)
 
 int checkboard(void)
 {
-	unsigned char s[50];
+	char s[50];
 	int i;
 	backup_t *b = (backup_t *) s;
 
@@ -337,7 +337,7 @@ int overwrite_console(void)
 ************************************************************************/
 void print_vcma9_info(void)
 {
-	unsigned char s[50];
+	char s[50];
 	int i;
 
 	if ((i = getenv_r("serial#", s, 32)) < 0) {

board/mpl/vcma9/vcma9.h

@@ -128,7 +128,7 @@ typedef struct {
 } /*__attribute__((__packed__))*/ VCMA9_PLD;
 
 #define VCMA9_PLD_BASE	0x2C000100
-static inline VCMA9_PLD * const VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
 {
 	return (VCMA9_PLD * const)VCMA9_PLD_BASE;
 }

board/pb1x00/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o flash.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/pb1x00/lowlevel_init.S

@@ -15,8 +15,8 @@
 	.set noreorder
 	.set mips32
 
-	.globl	memsetup
+	.globl	lowlevel_init
-memsetup:
+lowlevel_init:
 	/*
 	 * Step 1) Establish CPU endian mode.
 	 * NOTE: A fair amount of code is necessary on the Pb1000 to

board/pb1x00/pb1x00.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -41,7 +42,9 @@ void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
 
 int checkboard (void)
 {
+#if defined(CONFIG_IDE_PCMCIA) && 0
 	u16 status;
+#endif
 	/* volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); */
 	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
 	u32 proc_id;
@@ -69,6 +72,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #if defined(CONFIG_IDE_PCMCIA) && 0
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */

board/pb1x00/u-boot.lds

@@ -43,20 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
+	. = .;
-	.sdata  : { *(.sdata) }
+	_gp = ALIGN(16) + 0x7ff0;
-
-	_gp = ALIGN(16);
 
+	.got : {
 	  __got_start = .;
-	.got  : { *(.got) }
+	  *(.got)
 	  __got_end = .;
+	}
 
 	.sdata  : { *(.sdata) }
 
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/pleb2/flash.c

@@ -196,7 +196,7 @@ void flash_print_info (flash_info_t * info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";

board/purple/flash.c

@@ -299,7 +299,7 @@ void flash_print_info (flash_info_t *info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";

board/purple/purple.c

@@ -26,6 +26,7 @@
 #include <asm/inca-ip.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 #include <asm/addrspace.h>
 #include <asm/cacheops.h>
 
@@ -145,6 +146,8 @@ int checkboard (void)
 
 	printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }
 

board/purple/u-boot.lds

@@ -53,21 +53,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/pxa255_idp/Makefile

@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	:= pxa_idp.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/pxa255_idp/config.mk

@@ -1,3 +1,3 @@
 #TEXT_BASE = 0xa1700000
-TEXT_BASE = 0xa3000000
+TEXT_BASE = 0xa3080000
 #TEXT_BASE = 0

board/pxa255_idp/lowlevel_init.S

@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -41,8 +41,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
 /*
  * 	Memory setup
  */
-.globl memsetup
+.globl lowlevel_init
-memsetup:
+lowlevel_init:
 
 	mov      r10, lr
 
@@ -426,7 +426,7 @@ initclks:
 	bl 	blink
 #endif
 
-endmemsetup:
+endlowlevel_init:
 
 	mov     pc, r10
 

board/pxa255_idp/u-boot.lds

@@ -44,6 +44,7 @@ SECTIONS
 	. = ALIGN(4);
 	.got : { *(.got) }
 
+	. = .;
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
 	__u_boot_cmd_end = .;

board/rsdproto/rsdproto.c

@@ -210,7 +210,7 @@ void read_RS5C372_time (struct tm *timedate)
 
 #define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
 
-	if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
+	if (! i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
 		timedate->tm_sec = BCD_TO_BIN (buffer[0]);
 		timedate->tm_min = BCD_TO_BIN (buffer[1]);
 		timedate->tm_hour = BCD_TO_BIN (buffer[2]);
@@ -231,7 +231,7 @@ int read_LM84_temp (int address)
 	unsigned char buffer[8];
 	/*int rc;*/
 
-	if (i2c_read (address, 0, 1, buffer, 1)) {
+	if (! i2c_read (address, 0, 1, buffer, 1)) {
 		return (int) buffer[0];
 	} else {
 		/*printf("i2c error %02x\n", rc); */

board/rsdproto/u-boot.lds

@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc8260/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     /*. = env_offset; */
   }

board/sbc2410x/flash.c

@@ -288,7 +288,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/smdk2410/flash.c

@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/tb0229/tb0229.c

@@ -13,10 +13,9 @@
 #include <command.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
+#include <asm/io.h>
 #include <pci.h>
 
-unsigned long mips_io_port_base = 0;
-
 #if defined(CONFIG_PCI)
 static struct pci_controller hose;
 
@@ -26,17 +25,17 @@ void pci_init_board (void)
 }
 #endif
 
-
 long int initdram(int board_type)
 {
 	return get_ram_size (CFG_SDRAM_BASE, 0x8000000);
 }
 
-
 int checkboard (void)
 {
 	printf("Board: TANBAC TB0229 ");
 	printf("(CPU Speed %d MHz)\n", (int)CPU_CLOCK_RATE/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }

board/tb0229/u-boot.lds

@@ -43,21 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/tqm5200/cmd_stk52xx.c

@@ -561,7 +561,7 @@ void led_init(void)
 	gpt->gpt6.emsr |=  0x00000024;
 	gpt->gpt7.emsr |=  0x00000024;
 
-
+#ifndef CONFIG_TQM5200S
 	/* enable SM501 GPIO control (in both power modes) */
 	*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
 		POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
 
 	/* configure SM501 gpio pins 48-51 as output */
 	*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
 }
 
 /*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
 			gpt->gpt7.emsr &=  ~(1 << 4);
 		}
 		break;
-
+#ifndef CONFIG_TQM5200S
 	case 24:
 		if (strcmp (argv[3], "on") == 0) {
 			*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
 				~(0x1 << 19);
 		}
 		break;
-
+#endif /* !CONFIG_TQM5200S */
 	default:
 		printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
 		return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
 	return error_status;
 }
 
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 static void sm501_backlight (unsigned int state)
 {
 	if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
 		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
 			~((1 << 26) | (1 << 27));
 }
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			else
 				printf ("Error\n");
 			return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 		} else if (strncmp (argv[1], "backlight", 4) == 0) {
 			if (strncmp (argv[2], "on", 2) == 0) {
 				sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				sm501_backlight (BL_OFF);
 				return 0;
 			}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 		}
 		break;
 
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
 	"     - loopback plug for X83 required\n"
 	"fkt rs232 number\n"
 	"     - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
 	"fkt backlight on/off\n"
 	"     - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
 );
 #elif defined(CONFIG_FO300)
 U_BOOT_CMD(

board/tqm5200/tqm5200.c

@@ -441,15 +441,23 @@ ulong post_word_load (void)
 }
 #endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
 
-#ifdef CONFIG_PS2MULT
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
+	extern int usb_cpu_init(void);
+
+#ifdef CONFIG_PS2MULT
 	ps2mult_early_init();
+#endif /* CONFIG_PS2MULT */
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+	/* Low level USB init, required for proper kernel operation */
+	usb_cpu_init();
+#endif
+
 	return (0);
 }
 #endif
-#endif /* CONFIG_PS2MULT */
 
 #ifdef CONFIG_FO300
 int silent_boot (void)
@@ -543,6 +551,7 @@ int last_stage_init (void)
 		__asm__ volatile ("sync");
 	}
 
+#ifndef CONFIG_TQM5200S	/* The TQM5200S has no SM501 grafic controller */
 	/*
 	 * Check for Grafic Controller
 	 */
@@ -584,6 +593,7 @@ int last_stage_init (void)
 		disable_ctrlc(1);
 	}
 #endif
+#endif /* !CONFIG_TQM5200S */
 
 	return 0;
 }

board/tqm8xx/tqm8xx.c

@@ -354,6 +354,8 @@ long int initdram (int board_type)
 	udelay (10000);
 
 #ifdef	CONFIG_CAN_DRIVER
+	/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
+
 	/* Initialize OR3 / BR3 */
 	memctl->memc_or3 = CFG_OR3_CAN;
 	memctl->memc_br3 = CFG_BR3_CAN;
@@ -362,7 +364,7 @@ long int initdram (int board_type)
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
 
 	/* Initialize UPMB for CAN: single read */
-	memctl->memc_mdr = 0xFFFFC004;
+	memctl->memc_mdr = 0xFFFFCC04;
 	memctl->memc_mcr = 0x0100 | UPMB;
 
 	memctl->memc_mdr = 0x0FFFD004;
@@ -374,23 +376,23 @@ long int initdram (int board_type)
 	memctl->memc_mdr = 0x3FFFC004;
 	memctl->memc_mcr = 0x0103 | UPMB;
 
-	memctl->memc_mdr = 0xFFFFDC05;
+	memctl->memc_mdr = 0xFFFFDC07;
 	memctl->memc_mcr = 0x0104 | UPMB;
 
 	/* Initialize UPMB for CAN: single write */
-	memctl->memc_mdr = 0xFFFCC004;
+	memctl->memc_mdr = 0xFFFCCC04;
 	memctl->memc_mcr = 0x0118 | UPMB;
 
-	memctl->memc_mdr = 0xCFFCD004;
+	memctl->memc_mdr = 0xCFFCDC04;
 	memctl->memc_mcr = 0x0119 | UPMB;
 
-	memctl->memc_mdr = 0x0FFCC000;
+	memctl->memc_mdr = 0x3FFCC000;
 	memctl->memc_mcr = 0x011A | UPMB;
 
-	memctl->memc_mdr = 0x7FFCC004;
+	memctl->memc_mdr = 0xFFFCC004;
 	memctl->memc_mcr = 0x011B | UPMB;
 
-	memctl->memc_mdr = 0xFFFDCC05;
+	memctl->memc_mdr = 0xFFFDC405;
 	memctl->memc_mcr = 0x011C | UPMB;
 #endif							/* CONFIG_CAN_DRIVER */
 

board/wepep250/flash.c

@@ -44,6 +44,7 @@
 
 #if ( WEP_FLASH_BUS_WIDTH == 1 )
 #  define FLASH_BUS vu_char
+#  define FLASH_BUS_RET u_char
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  else
@@ -53,6 +54,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 2 )
 #  define FLASH_BUS vu_short
+#  define FLASH_BUS_RET u_short
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -64,6 +66,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 4 )
 #  define FLASH_BUS vu_long
+#  define FLASH_BUS_RET u_long
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -81,7 +84,7 @@
 
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
-static FLASH_BUS flash_status_reg (void)
+static FLASH_BUS_RET flash_status_reg (void)
 {
 
 	FLASH_BUS *addr = (FLASH_BUS *) 0;

board/xsengine/flash.c

@@ -46,11 +46,11 @@ unsigned long flash_init (void)
 	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
-			flash_get_size ((long *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
 			break;
 		case 1:
-			flash_get_size ((long *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_size ((vu_long *) PHYS_FLASH_2, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
 			break;
 		default:

common/Makefile

@@ -27,31 +27,105 @@ LIB	= $(obj)libcommon.a
 
 AOBJS	=
 
-COBJS	= main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \
+COBJS-y += main.o
-	  cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
+COBJS-y += ACEX1K.o
-	  cmd_cache.o cmd_console.o \
+COBJS-y += altera.o
-	  cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \
+COBJS-y += bedbug.o
-	  cmd_eeprom.o cmd_elf.o cmd_ext2.o \
+COBJS-y += circbuf.o
-	  cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
+COBJS-y += cmd_autoscript.o
-	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
+COBJS-y += cmd_bdinfo.o
-	  cmd_load.o cmd_log.o \
+COBJS-y += cmd_bedbug.o
-	  cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
+COBJS-y += cmd_bmp.o
-	  cmd_nand.o cmd_net.o cmd_nvedit.o \
+COBJS-y += cmd_boot.o
-	  cmd_pci.o cmd_pcmcia.o cmd_portio.o \
+COBJS-y += cmd_bootm.o
-	  cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \
+COBJS-y += cmd_cache.o
-	  cmd_universe.o cmd_usb.o cmd_vfd.o \
+COBJS-y += cmd_console.o
-	  command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
+COBJS-y += cmd_date.o
-	  environment.o env_common.o \
+COBJS-y += cmd_dcr.o
-	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
+COBJS-y += cmd_diag.o
-	  env_nvram.o env_nowhere.o \
+COBJS-y += cmd_display.o
-	  exports.o \
+COBJS-y += cmd_doc.o
-	  fdt_support.o flash.o fpga.o ft_build.o \
+COBJS-y += cmd_dtt.o
-	  hush.o kgdb.o lcd.o lists.o lynxkdi.o \
+COBJS-y += cmd_eeprom.o
-	  memsize.o miiphybb.o miiphyutil.o \
+COBJS-y += cmd_elf.o
-	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
+COBJS-y += cmd_ext2.o
-	  usb.o usb_kbd.o usb_storage.o \
+COBJS-y += cmd_fat.o
-	  virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o
+COBJS-y += cmd_fdc.o
+COBJS-y += cmd_fdt.o
+COBJS-y += cmd_fdos.o
+COBJS-y += cmd_flash.o
+COBJS-y += cmd_fpga.o
+COBJS-y += cmd_i2c.o
+COBJS-y += cmd_ide.o
+COBJS-y += cmd_immap.o
+COBJS-y += cmd_itest.o
+COBJS-y += cmd_jffs2.o
+COBJS-y += cmd_load.o
+COBJS-y += cmd_log.o
+COBJS-y += cmd_mem.o
+COBJS-y += cmd_mii.o
+COBJS-y += cmd_misc.o
+COBJS-y += cmd_mmc.o
+COBJS-y += cmd_nand.o
+COBJS-y += cmd_net.o
+COBJS-y += cmd_nvedit.o
+COBJS-y += cmd_onenand.o
+COBJS-y += cmd_pci.o
+COBJS-y += cmd_pcmcia.o
+COBJS-y += cmd_portio.o
+COBJS-y += cmd_reginfo.o
+COBJS-y += cmd_reiser.o
+COBJS-y += cmd_sata.o
+COBJS-y += cmd_scsi.o
+COBJS-y += cmd_spi.o
+COBJS-y += cmd_universe.o
+COBJS-y += cmd_usb.o
+COBJS-y += cmd_vfd.o
+COBJS-y += command.o
+COBJS-y += console.o
+COBJS-y += cyclon2.o
+COBJS-y += devices.o
+COBJS-y += dlmalloc.o
+COBJS-y += docecc.o
+COBJS-y += environment.o
+COBJS-y += env_common.o
+COBJS-y += env_nand.o
+COBJS-y += env_dataflash.o
+COBJS-y += env_flash.o
+COBJS-y += env_eeprom.o
+COBJS-y += env_onenand.o
+COBJS-y += env_nvram.o
+COBJS-y += env_nowhere.o
+COBJS-y += exports.o
+COBJS-y += fdt_support.o
+COBJS-y += flash.o
+COBJS-y += fpga.o
+COBJS-y += ft_build.o
+COBJS-y += hush.o
+COBJS-y += kgdb.o
+COBJS-y += lcd.o
+COBJS-y += lists.o
+COBJS-y += lynxkdi.o
+COBJS-y += memsize.o
+COBJS-y += miiphybb.o
+COBJS-y += miiphyutil.o
+COBJS-y += s_record.o
+COBJS-y += serial.o
+COBJS-y += soft_i2c.o
+COBJS-y += soft_spi.o
+COBJS-y += spartan2.o
+COBJS-y += spartan3.o
+COBJS-y += usb.o
+COBJS-y += usb_kbd.o
+COBJS-y += usb_storage.o
+COBJS-y += virtex2.o
+COBJS-y += xilinx.o
+COBJS-y += crc16.o
+COBJS-y += xyzModem.o
+COBJS-y += cmd_mac.o
+COBJS-y += cmd_mfsl.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 

common/cmd_bootm.c

@@ -468,7 +468,7 @@ U_BOOT_CMD(
  	"\t'arg' can be the address of an initrd image\n"
 #if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)
 	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
-	"\ta third argument is required which is the address of the of the\n"
+	"\ta third argument is required which is the address of the\n"
 	"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
 	"\tuse a '-' for the second argument. If you do not pass a third\n"
 	"\ta bd_info struct will be passed instead\n"

common/cmd_dtt.c

@@ -57,7 +57,7 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
 	  dtt,	1,	1,	do_dtt,
-	  "dtt     - Digital Thermometer and Themostat\n",
+	  "dtt     - Digital Thermometer and Thermostat\n",
 	  "        - Read temperature from digital thermometer and thermostat.\n"
 );
 

common/cmd_fpga.c

@@ -60,6 +60,7 @@ static int fpga_get_op (char *opstr);
 /* Convert bitstream data and load into the fpga */
 int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 {
+#if (CONFIG_FPGA & CFG_FPGA_XILINX)
 	unsigned int length;
 	unsigned char* swapdata;
 	unsigned int swapsize;
@@ -72,7 +73,6 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 
 	dataptr = (unsigned char *)fpgadata;
 
-#if CFG_FPGA_XILINX
 	/* skip the first bytes of the bitsteam, their meaning is unknown */
 	length = (*dataptr << 8) + *(dataptr+1);
 	dataptr+=2;

common/cmd_ide.c

@@ -54,10 +54,6 @@
 
 #ifndef __PPC__
 #include <asm/io.h>
-#ifdef __MIPS__
-/* Macros depend on this variable */
-unsigned long mips_io_port_base = 0;
-#endif
 #endif
 
 #ifdef CONFIG_IDE_8xx_DIRECT
@@ -1136,9 +1132,9 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 
 	input_swap_data (device, iobuf, ATA_SECTORWORDS);
 
-	ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
+	ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
-	ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
+	ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
-	ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
+	ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
 #ifdef __LITTLE_ENDIAN
 	/*
 	 * firmware revision and model number have Big Endian Byte
@@ -1953,9 +1949,9 @@ static void	atapi_inquiry(block_dev_desc_t * dev_desc)
 		return;
 
 	/* copy device ident strings */
-	ident_cpy(dev_desc->vendor,&iobuf[8],8);
+	ident_cpy((unsigned char*)dev_desc->vendor,&iobuf[8],8);
-	ident_cpy(dev_desc->product,&iobuf[16],16);
+	ident_cpy((unsigned char*)dev_desc->product,&iobuf[16],16);
-	ident_cpy(dev_desc->revision,&iobuf[32],5);
+	ident_cpy((unsigned char*)dev_desc->revision,&iobuf[32],5);
 
 	dev_desc->lun=0;
 	dev_desc->lba=0;

common/cmd_mfsl.c

@@ -355,19 +355,18 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	unsigned int reg = 0;
 	unsigned int val = 0;
 
-	reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+	if (argc < 2) {
-	val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
-	if (argc < 1) {
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return 1;
 	}
+	reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+	val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
 	switch (reg) {
 	case 0x1:
 		if (argc > 2) {
 			MTS (val, rmsr);
 			NOP;
 			MFS (val, rmsr);
-
 		} else {
 			MFS (val, rmsr);
 		}
@@ -382,6 +381,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		puts ("ESR");
 		break;
 	default:
+		puts ("Unsupported register\n");
 		return 1;
 	}
 	printf (": 0x%08lx\n", val);
@@ -408,10 +408,10 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr,
 		" 3 - blocking control write\n");
 
 U_BOOT_CMD (rspr, 3, 1, do_rspr,
-		"rmsr    - read/write special purpose register\n",
+		"rspr    - read/write special purpose register\n",
 		"- reg_num [write value] read/write special purpose register\n"
-		" 0 - MSR - Machine status register\n"
+		" 1 - MSR - Machine status register\n"
-		" 1 - EAR - Exception address register\n"
+		" 3 - EAR - Exception address register\n"
-		" 2 - ESR - Exception status register\n");
+		" 5 - ESR - Exception status register\n");
 
 #endif

common/cmd_mii.c

@@ -112,9 +112,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
@@ -496,9 +498,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}

common/cmd_nvedit.c

@@ -57,8 +57,9 @@ DECLARE_GLOBAL_DATA_PTR;
     !defined(CFG_ENV_IS_IN_FLASH)	&& \
     !defined(CFG_ENV_IS_IN_DATAFLASH)	&& \
     !defined(CFG_ENV_IS_IN_NAND)	&& \
+    !defined(CFG_ENV_IS_IN_ONENAND)	&& \
     !defined(CFG_ENV_IS_NOWHERE)
-# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|NOWHERE}
+# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|NOWHERE}
 #endif
 
 #define XMK_STR(x)	#x
@@ -553,7 +554,8 @@ int getenv_r (char *name, char *buf, unsigned len)
 
 #if defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
-    || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND))
+    || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
+    || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))
 int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	extern char * env_name_spec;
@@ -608,7 +610,8 @@ U_BOOT_CMD(
 
 #if defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
-    || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND))
+    || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
+    || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))
 U_BOOT_CMD(
 	saveenv, 1, 0,	do_saveenv,
 	"saveenv - save environment variables to persistent storage\n",

common/cmd_onenand.c

@@ -0,0 +1,155 @@
+/*
+ *  U-Boot command for OneNAND support
+ *
+ *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+
+#ifdef CONFIG_CMD_ONENAND
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <asm/io.h>
+
+extern struct mtd_info onenand_mtd;
+extern struct onenand_chip onenand_chip;
+
+int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int ret = 0;
+
+	switch (argc) {
+	case 0:
+	case 1:
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+
+	case 2:
+		if (strncmp(argv[1], "open", 4) == 0) {
+			onenand_init();
+			return 0;
+		}
+		onenand_print_device_info(onenand_chip.device_id, 1);
+		return 0;
+
+	default:
+		/* At least 4 args */
+		if (strncmp(argv[1], "erase", 5) == 0) {
+			struct erase_info instr;
+			ulong start, end;
+			ulong block;
+
+			start = simple_strtoul(argv[2], NULL, 10);
+			end = simple_strtoul(argv[3], NULL, 10);
+			start -= (unsigned long)onenand_chip.base;
+			end -= (unsigned long)onenand_chip.base;
+
+			if (!end || end < 0)
+				end = start;
+
+			printf("Erase block from %d to %d\n", start, end);
+
+			for (block = start; block <= end; block++) {
+				instr.addr = block << onenand_chip.erase_shift;
+				instr.len = 1 << onenand_chip.erase_shift;
+				ret = onenand_erase(&onenand_mtd, &instr);
+				if (ret) {
+					printf("erase failed %d\n", block);
+					break;
+				}
+			}
+
+			return 0;
+		}
+
+		if (strncmp(argv[1], "read", 4) == 0) {
+			ulong addr = simple_strtoul(argv[2], NULL, 16);
+			ulong ofs = simple_strtoul(argv[3], NULL, 16);
+			size_t len = simple_strtoul(argv[4], NULL, 16);
+			size_t retlen = 0;
+			int oob = strncmp(argv[1], "read.oob", 8) ? 0 : 1;
+
+			ofs -= (unsigned long)onenand_chip.base;
+
+			if (oob)
+				onenand_read_oob(&onenand_mtd, ofs, len,
+						 &retlen, (u_char *) addr);
+			else
+				onenand_read(&onenand_mtd, ofs, len, &retlen,
+					     (u_char *) addr);
+			printf("Done\n");
+
+			return 0;
+		}
+
+		if (strncmp(argv[1], "write", 5) == 0) {
+			ulong addr = simple_strtoul(argv[2], NULL, 16);
+			ulong ofs = simple_strtoul(argv[3], NULL, 16);
+			size_t len = simple_strtoul(argv[4], NULL, 16);
+			size_t retlen = 0;
+
+			ofs -= (unsigned long)onenand_chip.base;
+
+			onenand_write(&onenand_mtd, ofs, len, &retlen,
+				      (u_char *) addr);
+			printf("Done\n");
+
+			return 0;
+		}
+
+		if (strncmp(argv[1], "block", 5) == 0) {
+			ulong addr = simple_strtoul(argv[2], NULL, 16);
+			ulong block = simple_strtoul(argv[3], NULL, 10);
+			ulong page = simple_strtoul(argv[4], NULL, 10);
+			size_t len = simple_strtol(argv[5], NULL, 10);
+			size_t retlen = 0;
+			ulong ofs;
+			int oob = strncmp(argv[1], "block.oob", 9) ? 0 : 1;
+
+			ofs = block << onenand_chip.erase_shift;
+			if (page)
+				ofs += page << onenand_chip.page_shift;
+
+			if (!len) {
+				if (oob)
+					len = 64;
+				else
+					len = 512;
+			}
+
+			if (oob)
+				onenand_read_oob(&onenand_mtd, ofs, len,
+						 &retlen, (u_char *) addr);
+			else
+				onenand_read(&onenand_mtd, ofs, len, &retlen,
+					     (u_char *) addr);
+			return 0;
+		}
+
+		break;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	onenand,	6,	1,	do_onenand,
+	"onenand - OneNAND sub-system\n",
+	"info   - show available OneNAND devices\n"
+	"onenand read[.oob] addr ofs len - read data at ofs with len to addr\n"
+	"onenand write addr ofs len - write data at ofs with len from addr\n"
+	"onenand erase saddr eaddr - erase block start addr to end addr\n"
+	"onenand block[.oob] addr block [page] [len] - "
+		"read data with (block [, page]) to addr"
+);
+
+#endif /* CONFIG_CMD_ONENAND */

common/cmd_scsi.c

@@ -129,9 +129,12 @@ void scsi_scan(int mode)
 			if((modi&0x80)==0x80) /* drive is removable */
 				scsi_dev_desc[scsi_max_devs].removable=TRUE;
 			/* get info for this device */
-			scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].vendor[0],&tempbuff[8],8);
+			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
-			scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].product[0],&tempbuff[16],16);
+				       &tempbuff[8], 8);
-			scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].revision[0],&tempbuff[32],4);
+			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0],
+				       &tempbuff[16], 16);
+			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0],
+				       &tempbuff[32], 4);
 			scsi_dev_desc[scsi_max_devs].target=pccb->target;
 			scsi_dev_desc[scsi_max_devs].lun=pccb->lun;
 

common/env_onenand.c

@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CFG_ENV_IS_IN_ONENAND)	/* Environment is in OneNAND */
+
+#include <command.h>
+#include <environment.h>
+#include <linux/stddef.h>
+#include <malloc.h>
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+extern struct mtd_info onenand_mtd;
+extern struct onenand_chip onenand_chip;
+
+/* References to names in env_common.c */
+extern uchar default_environment[];
+
+#define ONENAND_ENV_SIZE(mtd)	(mtd.oobblock - ENV_HEADER_SIZE)
+
+char *env_name_spec = "OneNAND";
+
+#ifdef ENV_IS_EMBEDDED
+extern uchar environment[];
+env_t *env_ptr = (env_t *) (&environment[0]);
+#else /* ! ENV_IS_EMBEDDED */
+static unsigned char onenand_env[MAX_ONENAND_PAGESIZE];
+env_t *env_ptr = (env_t *) onenand_env;
+#endif /* ENV_IS_EMBEDDED */
+
+uchar env_get_char_spec(int index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	return (*((uchar *) (gd->env_addr + index)));
+}
+
+void env_relocate_spec(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned long env_addr;
+	int use_default = 0;
+	int retlen;
+
+	env_addr = CFG_ENV_ADDR;
+	env_addr -= (unsigned long)onenand_chip.base;
+
+	/* Check OneNAND exist */
+	if (onenand_mtd.oobblock)
+		/* Ignore read fail */
+		onenand_read(&onenand_mtd, env_addr, onenand_mtd.oobblock,
+			     &retlen, (u_char *) env_ptr);
+	else
+		onenand_mtd.oobblock = MAX_ONENAND_PAGESIZE;
+
+	if (crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd)) !=
+	    env_ptr->crc)
+		use_default = 1;
+
+	if (use_default) {
+		memcpy(env_ptr->data, default_environment,
+		       ONENAND_ENV_SIZE(onenand_mtd));
+		env_ptr->crc =
+		    crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd));
+	}
+
+	gd->env_addr = (ulong) & env_ptr->data;
+	gd->env_valid = 1;
+}
+
+int saveenv(void)
+{
+	unsigned long env_addr = CFG_ENV_ADDR;
+	struct erase_info instr;
+	int retlen;
+
+	instr.len = CFG_ENV_SIZE;
+	instr.addr = env_addr;
+	instr.addr -= (unsigned long)onenand_chip.base;
+	if (onenand_erase(&onenand_mtd, &instr)) {
+		printf("OneNAND: erase failed at 0x%08x\n", env_addr);
+		return 1;
+	}
+
+	/* update crc */
+	env_ptr->crc =
+	    crc32(0, env_ptr->data, onenand_mtd.oobblock - ENV_HEADER_SIZE);
+
+	env_addr -= (unsigned long)onenand_chip.base;
+	if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.oobblock, &retlen,
+	     (u_char *) env_ptr)) {
+		printf("OneNAND: write failed at 0x%08x\n", instr.addr);
+		return 2;
+	}
+
+	return 0;
+}
+
+int env_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* use default */
+	gd->env_addr = (ulong) & default_environment[0];
+	gd->env_valid = 1;
+
+	return 0;
+}
+
+#endif /* CFG_ENV_IS_IN_ONENAND */

common/miiphyutil.c

@@ -49,9 +49,9 @@
 struct mii_dev {
 	struct list_head link;
 	char *name;
-	int (* read)(char *devname, unsigned char addr,
+	int (*read) (char *devname, unsigned char addr,
 		     unsigned char reg, unsigned short *value);
-	int (* write)(char *devname, unsigned char addr,
+	int (*write) (char *devname, unsigned char addr,
 		      unsigned char reg, unsigned short value);
 };
 
@@ -62,9 +62,9 @@ static struct mii_dev *current_mii;
  *
  * Initialize global data. Need to be called before any other miiphy routine.
  */
-void miiphy_init()
+void miiphy_init ()
 {
-		INIT_LIST_HEAD(&mii_devs);
+	INIT_LIST_HEAD (&mii_devs);
 	current_mii = NULL;
 }
 
@@ -72,10 +72,10 @@ void miiphy_init()
  *
  * Register read and write MII access routines for the device <name>.
  */
-void miiphy_register(char *name,
+void miiphy_register (char *name,
-		int (* read)(char *devname, unsigned char addr,
+		      int (*read) (char *devname, unsigned char addr,
 				   unsigned char reg, unsigned short *value),
-		int (* write)(char *devname, unsigned char addr,
+		      int (*write) (char *devname, unsigned char addr,
 				    unsigned char reg, unsigned short value))
 {
 	struct list_head *entry;
@@ -84,63 +84,64 @@ void miiphy_register(char *name,
 	unsigned int name_len;
 
 	/* check if we have unique name */
-	list_for_each(entry, &mii_devs) {
+	list_for_each (entry, &mii_devs) {
-		miidev = list_entry(entry, struct mii_dev, link);
+		miidev = list_entry (entry, struct mii_dev, link);
-		if (strcmp(miidev->name, name) == 0) {
+		if (strcmp (miidev->name, name) == 0) {
-			printf("miiphy_register: non unique device name '%s'\n",
+			printf ("miiphy_register: non unique device name "
-					name);
+				"'%s'\n", name);
 			return;
 		}
 	}
 
 	/* allocate memory */
-	name_len = strlen(name);
+	name_len = strlen (name);
-	new_dev = (struct mii_dev *)malloc(sizeof(struct mii_dev) + name_len + 1);
+	new_dev =
+	    (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1);
 
-	if(new_dev == NULL) {
+	if (new_dev == NULL) {
-		printf("miiphy_register: cannot allocate memory for '%s'\n",
+		printf ("miiphy_register: cannot allocate memory for '%s'\n",
 			name);
 		return;
 	}
-	memset(new_dev, 0, sizeof(struct mii_dev) + name_len);
+	memset (new_dev, 0, sizeof (struct mii_dev) + name_len);
 
 	/* initalize mii_dev struct fields */
-	INIT_LIST_HEAD(&new_dev->link);
+	INIT_LIST_HEAD (&new_dev->link);
 	new_dev->read = read;
 	new_dev->write = write;
 	new_dev->name = (char *)(new_dev + 1);
-	strncpy(new_dev->name, name, name_len);
+	strncpy (new_dev->name, name, name_len);
 	new_dev->name[name_len] = '\0';
 
-	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+	debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
 	       new_dev->name, new_dev->read, new_dev->write);
 
 	/* add it to the list */
-	list_add_tail(&new_dev->link, &mii_devs);
+	list_add_tail (&new_dev->link, &mii_devs);
 
 	if (!current_mii)
 		current_mii = new_dev;
 }
 
-int miiphy_set_current_dev(char *devname)
+int miiphy_set_current_dev (char *devname)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	list_for_each(entry, &mii_devs) {
+	list_for_each (entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			current_mii = dev;
 			return 0;
 		}
 	}
 
-	printf("No such device: %s\n", devname);
+	printf ("No such device: %s\n", devname);
 	return 1;
 }
 
-char *miiphy_get_current_dev()
+char *miiphy_get_current_dev ()
 {
 	if (current_mii)
 		return current_mii->name;
@@ -156,7 +157,7 @@ char *miiphy_get_current_dev()
  * Returns:
  *   0 on success
  */
-int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
 		 unsigned short *value)
 {
 	struct list_head *entry;
@@ -165,22 +166,22 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
 	int read_ret = 0;
 
 	if (!devname) {
-		printf("NULL device name!\n");
+		printf ("NULL device name!\n");
 		return 1;
 	}
 
-	list_for_each(entry, &mii_devs) {
+	list_for_each (entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			found_dev = 1;
-			read_ret = dev->read(devname, addr, reg, value);
+			read_ret = dev->read (devname, addr, reg, value);
 			break;
 		}
 	}
 
 	if (found_dev == 0)
-		printf("No such device: %s\n", devname);
+		printf ("No such device: %s\n", devname);
 
 	return ((found_dev) ? read_ret : 1);
 }
@@ -193,7 +194,7 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
  * Returns:
  *   0 on success
  */
-int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
 		  unsigned short value)
 {
 	struct list_head *entry;
@@ -202,22 +203,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
 	int write_ret = 0;
 
 	if (!devname) {
-		printf("NULL device name!\n");
+		printf ("NULL device name!\n");
 		return 1;
 	}
 
-	list_for_each(entry, &mii_devs) {
+	list_for_each (entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			found_dev = 1;
-			write_ret = dev->write(devname, addr, reg, value);
+			write_ret = dev->write (devname, addr, reg, value);
 			break;
 		}
 	}
 
 	if (found_dev == 0)
-		printf("No such device: %s\n", devname);
+		printf ("No such device: %s\n", devname);
 
 	return ((found_dev) ? write_ret : 1);
 }
@@ -226,23 +227,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
  *
  * Print out list of registered MII capable devices.
  */
-void miiphy_listdev(void)
+void miiphy_listdev (void)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	puts("MII devices: ");
+	puts ("MII devices: ");
-	list_for_each(entry, &mii_devs) {
+	list_for_each (entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+		dev = list_entry (entry, struct mii_dev, link);
-		printf("'%s' ", dev->name);
+		printf ("'%s' ", dev->name);
 	}
-	puts("\n");
+	puts ("\n");
 
 	if (current_mii)
-		printf("Current device: '%s'\n", current_mii->name);
+		printf ("Current device: '%s'\n", current_mii->name);
 }
 
-
 /*****************************************************************************
  *
  * Read the OUI, manufacture's model number, and revision number.
@@ -254,9 +254,7 @@ void miiphy_listdev(void)
  * Returns:
  *   0 on success
  */
-int miiphy_info (char *devname,
+int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
-		 unsigned char addr,
-		 unsigned int *oui,
 		 unsigned char *model, unsigned char *rev)
 {
 	unsigned int reg = 0;
@@ -288,13 +286,12 @@ int miiphy_info (char *devname,
 #ifdef DEBUG
 	printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
 #endif
-	*oui   =                 ( reg >> 10);
+	*oui = (reg >> 10);
-	*model = (unsigned char) ((reg >>  4) & 0x0000003F);
+	*model = (unsigned char)((reg >> 4) & 0x0000003F);
-	*rev   = (unsigned char) ( reg        & 0x0000000F);
+	*rev = (unsigned char)(reg & 0x0000000F);
 	return (0);
 }
 
-
 /*****************************************************************************
  *
  * Reset the PHY.
@@ -345,104 +342,138 @@ int miiphy_reset (char *devname, unsigned char addr)
 	return (0);
 }
 
-
 /*****************************************************************************
  *
- * Determine the ethernet speed (10/100).
+ * Determine the ethernet speed (10/100/1000).  Return 10 on error.
  */
 int miiphy_speed (char *devname, unsigned char addr)
 {
-	unsigned short reg;
+	u16 bmcr, anlpar;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
+	u16 btsr;
-		printf ("PHY 1000BT Status read failed\n");
+
-	} else {
+	/*
-		if (reg != 0xFFFF) {
+	 * Check for 1000BASE-X.  If it is supported, then assume that the speed
-			if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) !=0) {
+	 * is 1000.
-				return (_1000BASET);
+	 */
+	if (miiphy_is_1000base_x (devname, addr)) {
+		return _1000BASET;
 	}
+	/*
+	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+	 */
+	/* Check for 1000BASE-T. */
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+		printf ("PHY 1000BT status");
+		goto miiphy_read_failed;
 	}
+	if (btsr != 0xFFFF &&
+	    (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+		return _1000BASET;
 	}
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
+	if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
-		puts ("PHY speed read failed, assuming 10bT\n");
+		printf ("PHY speed");
-		return (_10BASET);
+		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
-	if ((reg & PHY_BMCR_AUTON) != 0) {
+	if (bmcr & PHY_BMCR_AUTON) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
-			puts ("PHY AN speed read failed, assuming 10bT\n");
+			printf ("PHY AN speed");
-			return (_10BASET);
+			goto miiphy_read_failed;
-		}
-		if ((reg & PHY_ANLPAR_100) != 0) {
-			return (_100BASET);
-		} else {
-			return (_10BASET);
 		}
+		return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
 	}
 	/* Get speed from basic control settings. */
-	else if (reg & PHY_BMCR_100MB) {
+	return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
-		return (_100BASET);
-	} else {
-		return (_10BASET);
-	}
 
+      miiphy_read_failed:
+	printf (" read failed, assuming 10BASE-T\n");
+	return _10BASET;
 }
 
-
 /*****************************************************************************
  *
- * Determine full/half duplex.
+ * Determine full/half duplex.  Return half on error.
  */
 int miiphy_duplex (char *devname, unsigned char addr)
 {
-	unsigned short reg;
+	u16 bmcr, anlpar;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
+	u16 btsr;
-		printf ("PHY 1000BT Status read failed\n");
+
-	} else {
+	/* Check for 1000BASE-X. */
-		if ( (reg != 0xFFFF) &&
+	if (miiphy_is_1000base_x (devname, addr)) {
-		     (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) ) {
+		/* 1000BASE-X */
-			if ((reg & PHY_1000BTSR_1000FD) !=0) {
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
-				return (FULL);
+			printf ("1000BASE-X PHY AN duplex");
-			} else {
+			goto miiphy_read_failed;
-				return (HALF);
 		}
 	}
+	/*
+	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+	 */
+	/* Check for 1000BASE-T. */
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+		printf ("PHY 1000BT status");
+		goto miiphy_read_failed;
+	}
+	if (btsr != 0xFFFF) {
+		if (btsr & PHY_1000BTSR_1000FD) {
+			return FULL;
+		} else if (btsr & PHY_1000BTSR_1000HD) {
+			return HALF;
+		}
 	}
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
+	if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
-		puts ("PHY duplex read failed, assuming half duplex\n");
+		puts ("PHY duplex");
-		return (HALF);
+		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
-	if ((reg & PHY_BMCR_AUTON) != 0) {
+	if (bmcr & PHY_BMCR_AUTON) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
-			puts ("PHY AN duplex read failed, assuming half duplex\n");
+			puts ("PHY AN duplex");
-			return (HALF);
+			goto miiphy_read_failed;
-		}
-
-		if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
-			return (FULL);
-		} else {
-			return (HALF);
 		}
+		return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+		    FULL : HALF;
 	}
 	/* Get speed from basic control settings. */
-	else if (reg & PHY_BMCR_DPLX) {
+	return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
-		return (FULL);
-	} else {
-		return (HALF);
-	}
 
+      miiphy_read_failed:
+	printf (" read failed, assuming half duplex\n");
+	return HALF;
+}
+
+/*****************************************************************************
+ *
+ * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
+ * 1000BASE-T, or on error.
+ */
+int miiphy_is_1000base_x (char *devname, unsigned char addr)
+{
+#if defined(CONFIG_PHY_GIGE)
+	u16 exsr;
+
+	if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+		printf ("PHY extended status read failed, assuming no "
+			"1000BASE-X\n");
+		return 0;
+	}
+	return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+#else
+	return 0;
+#endif
 }
 
 #ifdef CFG_FAULT_ECHO_LINK_DOWN
@@ -455,7 +486,7 @@ int miiphy_link (char *devname, unsigned char addr)
 	unsigned short reg;
 
 	/* dummy read; needed to latch some phys */
-	(void)miiphy_read(devname, addr, PHY_BMSR, &reg);
+	(void)miiphy_read (devname, addr, PHY_BMSR, &reg);
 	if (miiphy_read (devname, addr, PHY_BMSR, &reg)) {
 		puts ("PHY_BMSR read failed, assuming no link\n");
 		return (0);
@@ -469,5 +500,4 @@ int miiphy_link (char *devname, unsigned char addr)
 	}
 }
 #endif
-
 #endif /* CONFIG_MII */

common/spartan2.c

@@ -516,7 +516,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->clk) (FALSE, TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Write data */
-				(*fn->wr) ((val < 0), TRUE, cookie);
+				(*fn->wr) ((val & 0x80), TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Assert the clock */
 				(*fn->clk) (TRUE, TRUE, cookie);

common/spartan3.c

@@ -521,7 +521,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->clk) (FALSE, TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Write data */
-				(*fn->wr) ((val < 0), TRUE, cookie);
+				(*fn->wr) ((val & 0x80), TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Assert the clock */
 				(*fn->clk) (TRUE, TRUE, cookie);

common/usb_kbd.c

@@ -257,7 +257,7 @@ static int usb_kbd_translate(unsigned char scancode,unsigned char modifier,int p
 		repeat_delay=REPEAT_DELAY;
 	}
 	keycode=0;
-	if((scancode>3) && (scancode<0x1d)) { /* alpha numeric values */
+	if((scancode>3) && (scancode<=0x1d)) { /* alpha numeric values */
 		keycode=scancode-4 + 0x61;
 		if(caps_lock)
 			keycode&=~CAPITAL_MASK; /* switch to capital Letters */

common/usb_storage.c

@@ -1195,7 +1195,7 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
 	dev_desc->product[16] = 0;
 	dev_desc->revision[4] = 0;
 #ifdef CONFIG_USB_BIN_FIXUP
-	usb_bin_fixup(dev->descriptor, dev_desc->vendor, dev_desc->product);
+	usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor, (uchar *)dev_desc->product);
 #endif /* CONFIG_USB_BIN_FIXUP */
 	USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
 	if(usb_test_unit_ready(pccb,ss)) {

config.mk

@@ -69,10 +69,6 @@ PLATFORM_CPPFLAGS+= -D__ARM__
 endif
 endif
 
-ifeq ($(ARCH),blackfin)
-PLATFORM_CPPFLAGS+= -D__BLACKFIN__
-endif
-
 ifdef	ARCH
 sinclude $(TOPDIR)/$(ARCH)_config.mk	# include architecture dependend rules
 endif

cpu/arm720t/serial.c

@@ -125,6 +125,8 @@ serial_puts (const char *s)
 
 #elif defined(CONFIG_LPC2292)
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #include <asm/arch/hardware.h>
 
 void serial_setbrg (void)

cpu/arm920t/at91rm9200/usb.c

@@ -28,7 +28,7 @@
 
 #include <asm/arch/hardware.h>
 
-int usb_cpu_init()
+int usb_cpu_init(void)
 {
 	/* Enable USB host clock. */
 	*AT91C_PMC_SCER = AT91C_PMC_UHP;	/* 48MHz clock enabled for UHP */
@@ -36,7 +36,7 @@ int usb_cpu_init()
 	return 0;
 }
 
-int usb_cpu_stop()
+int usb_cpu_stop(void)
 {
 	/* Initialization failed */
 	*AT91C_PMC_PCDR = 1 << AT91C_ID_UHP;	/* Peripheral Clock Disable Register */
@@ -44,9 +44,9 @@ int usb_cpu_stop()
 	return 0;
 }
 
-int usb_cpu_init_fail()
+int usb_cpu_init_fail(void)
 {
-	usb_cpu_stop();
+	return usb_cpu_stop();
 }
 
 # endif /* CONFIG_AT91RM9200 */

cpu/arm920t/s3c24x0/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= i2c.o interrupts.o serial.o speed.o \
-	  usb.o
+	  usb.o usb_ohci.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

cpu/arm920t/s3c24x0/usb_ohci.c

@@ -498,7 +498,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 		if (ohci->ed_controltail == NULL) {
 			writel (ed, &ohci->regs->ed_controlhead);
 		} else {
-			ohci->ed_controltail->hwNextED = m32_swap (ed);
+			ohci->ed_controltail->hwNextED = (__u32)m32_swap (ed);
 		}
 		ed->ed_prev = ohci->ed_controltail;
 		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
@@ -514,7 +514,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 		if (ohci->ed_bulktail == NULL) {
 			writel (ed, &ohci->regs->ed_bulkhead);
 		} else {
-			ohci->ed_bulktail->hwNextED = m32_swap (ed);
+			ohci->ed_bulktail->hwNextED = (__u32)m32_swap (ed);
 		}
 		ed->ed_prev = ohci->ed_bulktail;
 		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
@@ -606,7 +606,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
 		/* dummy td; end of td list for ed */
 		td = td_alloc (usb_dev);
-		ed->hwTailP = m32_swap (td);
+		ed->hwTailP = (__u32)m32_swap (td);
 		ed->hwHeadP = ed->hwTailP;
 		ed->state = ED_UNLINK;
 		ed->type = usb_pipetype (pipe);
@@ -663,13 +663,13 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	if (!len)
 		data = 0;
 
-	td->hwINFO = m32_swap (info);
+	td->hwINFO = (__u32)m32_swap (info);
-	td->hwCBP = m32_swap (data);
+	td->hwCBP = (__u32)m32_swap (data);
 	if (data)
-		td->hwBE = m32_swap (data + len - 1);
+		td->hwBE = (__u32)m32_swap (data + len - 1);
 	else
 		td->hwBE = 0;
-	td->hwNextTD = m32_swap (td_pt);
+	td->hwNextTD = (__u32)m32_swap (td_pt);
 
 	/* append to queue */
 	td->ed->hwTailP = td->hwNextTD;

cpu/arm920t/start.S

@@ -27,9 +27,7 @@
 
 #include <config.h>
 #include <version.h>
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+#include <status_led.h>
-#include	<led.h>
-#endif
 
 /*
  *************************************************************************
@@ -41,7 +39,7 @@
 
 
 .globl _start
-_start:	b       reset
+_start:	b       start_code
 	ldr	pc, _undefined_instruction
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
@@ -64,7 +62,7 @@ _fiq:			.word fiq
 /*
  *************************************************************************
  *
- * Startup Code (reset vector)
+ * Startup Code (called from the ARM reset exception vector)
  *
  * do important init only if we don't start from memory!
  * relocate armboot to ram
@@ -106,10 +104,10 @@ FIQ_STACK_START:
 
 
 /*
- * the actual reset code
+ * the actual start code
  */
 
-reset:
+start_code:
 	/*
 	 * set the cpu to SVC32 mode
 	 */
@@ -118,58 +116,12 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
-#if	CONFIG_AT91RM9200
+	bl coloured_LED_init
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
-	bl LED_init
 	bl red_LED_on
-#endif
 
-#ifdef CONFIG_BOOTBINFUNC
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
-/* code based on entry.S from ATMEL */
-#define AT91C_BASE_CKGR 0xFFFFFC20
-#define CKGR_MOR 0
-	/* Get the CKGR Base Address */
-	ldr     r1, =AT91C_BASE_CKGR
-
-/* Main oscillator Enable register	APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
-/*	ldr 	r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
-	ldr 	r0, =0x0000FF01
-	str     r0, [r1, #CKGR_MOR]
-	/* Add loop to compensate Main Oscillator startup time */
-	ldr 	r0, =0x00000010
-LoopOsc:
-	subs    r0, r0, #1
-	bhi     LoopOsc
-	/* scratch stack */
-	ldr 	r1, =0x00204000
-	/* Insure word alignment */
-	bic     r1, r1, #3
-	/* Init stack SYS	 */
-	mov     sp, r1
 	/*
-	 * This does a lot more than just set up the memory, which
+	 * relocate exception table
-	 * is why it's called lowlevelinit
-	 */
-	bl	lowlevelinit /* in memsetup.S */
-	bl	icache_enable;
-	/* ------------------------------------
-	 * Read/modify/write CP15 control register
-	 * -------------------------------------
-	 * read cp15 control register (cp15 r1) in r0
-	 * ------------------------------------
-	 */
-	mrc     p15, 0, r0, c1, c0, 0
-	/* Reset bit :Little Endian end fast bus mode */
-	ldr     r3, =0xC0000080
-	/* Set bit :Asynchronous clock mode, Not Fast Bus */
-	ldr     r4, =0xC0000000
-	bic     r0, r0, r3
-	orr     r0, r0, r4
-	/* write r0 in cp15 control register (cp15 r1) */
-	mcr     p15, 0, r0, c1, c0, 0
-#endif /* CONFIG_BOOTBINFUNC */
-	/*
-	 * relocate exeception table
 	 */
 	ldr	r0, =_start
 	ldr	r1, =0x0
@@ -181,19 +133,20 @@ copyex:
 	bne	copyex
 #endif
 
-/* turn off the watchdog */
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
-#if defined(CONFIG_S3C2400)
+	/* turn off the watchdog */
+
+# if defined(CONFIG_S3C2400)
 #  define pWTCON		0x15300000
 #  define INTMSK		0x14400008	/* Interupt-Controller base addresses */
 #  define CLKDIVN	0x14800014	/* clock divisor register */
-#elif defined(CONFIG_S3C2410)
+#else
 #  define pWTCON		0x53000000
 #  define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
 #  define INTSUBMSK	0x4A00001C
 #  define CLKDIVN	0x4C000014	/* clock divisor register */
-#endif
+# endif
 
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
 	ldr     r0, =pWTCON
 	mov     r1, #0x0
 	str     r1, [r0]
@@ -226,25 +179,7 @@ copyex:
 #endif
 
 #ifdef	CONFIG_AT91RM9200
-#ifdef CONFIG_BOOTBINFUNC
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
 
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
-#else
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
@@ -284,27 +219,6 @@ clbss_l:str	r2, [r0]		/* clear loop...                    */
 	cmp	r0, r1
 	ble	clbss_l
 
-#if 0
-	/* try doing this stuff after the relocation */
-	ldr     r0, =pWTCON
-	mov     r1, #0x0
-	str     r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =INTMR
-	str	r1, [r0]
-
-	/* FCLK:HCLK:PCLK = 1:2:4 */
-	/* default FCLK is 120 MHz ! */
-	ldr	r0, =CLKDIVN
-	mov	r1, #3
-	str	r1, [r0]
-	/* END stuff after relocation */
-#endif
-
 	ldr	pc, _start_armboot
 
 _start_armboot:	.word start_armboot

cpu/mcf523x/config.mk

@@ -24,4 +24,8 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=5235 -fPIC
+else
 PLATFORM_CPPFLAGS += -m5307 -fPIC
+endif

cpu/mcf52x2/config.mk

@@ -24,4 +24,33 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5249=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg))
+is5253=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg))
+is5271=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg))
+is5272=$(shell grep CONFIG_M5272 $(TOPDIR)/include/$(cfg))
+is5282=$(shell grep CONFIG_M5282 $(TOPDIR)/include/$(cfg))
+
+
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+
+ifneq (,$(findstring CONFIG_M5249,$(is5249)))
+PLATFORM_CPPFLAGS += -mcpu=5249
+endif
+ifneq (,$(findstring CONFIG_M5253,$(is5253)))
+PLATFORM_CPPFLAGS += -mcpu=5253
+endif
+ifneq (,$(findstring CONFIG_M5271,$(is5271)))
+PLATFORM_CPPFLAGS += -mcpu=5271
+endif
+ifneq (,$(findstring CONFIG_M5272,$(is5272)))
+PLATFORM_CPPFLAGS += -mcpu=5272
+endif
+ifneq (,$(findstring CONFIG_M5282,$(is5282)))
+PLATFORM_CPPFLAGS += -mcpu=5282
+endif
+
+else
 PLATFORM_CPPFLAGS += -m5307
+endif

cpu/mcf52x2/start.S

@@ -58,7 +58,7 @@ _vectors:
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
 #if defined(CONFIG_R5200)
 .long	0x400
-#elif defined(CONFIG_M5282)
+#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
 .long	_start - TEXT_BASE
 #else
 .long	_START
@@ -177,7 +177,11 @@ _after_flashbar_copy:
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+	move.l	#CFG_INT_FLASH_BASE, %d0
+#else
 	move.l	#CFG_FLASH_BASE, %d0
+#endif
 	movec	%d0, %VBR
 #endif
 

cpu/mcf532x/config.mk

@@ -24,4 +24,8 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=5329 -fPIC
+else
 PLATFORM_CPPFLAGS += -m5307 -fPIC
+endif

cpu/mcf532x/cpu.c

@@ -35,14 +35,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 {
-	volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
+	volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM);
 
-	wdp->cr = 0;
 	udelay(1000);
-
+	rcm->rcr |= RCM_RCR_SOFTRST;
-	/* enable watchdog, set timeout to 0 and wait */
-	wdp->cr = WTM_WCR_EN;
-	while (1) ;
 
 	/* we don't return! */
 	return 0;

cpu/mcf532x/start.S

@@ -131,7 +131,7 @@ _start:
 	movec	%d0, %VBR
 
 	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
-	movec	%d0, %RAMBAR0
+	movec	%d0, %RAMBAR1
 
 	/* invalidate and disable cache */
 	move.l	#0x01000000, %d0		/* Invalidate cache cmd */
@@ -268,7 +268,7 @@ _int_handler:
 icache_enable:
 	move.l	#0x01000000, %d0		/* Invalidate cache cmd */
 	movec	%d0, %CACR			/* Invalidate cache */
-	move.l	#(CFG_SDRAM_BASE + 0xc000 + ((CFG_SDRAM_SIZE & 0x1fe0) << 11)), %d0
+	move.l	#(CFG_SDRAM_BASE + 0x1c000), %d0
 	movec	%d0, %ACR0			/* Enable cache */
 
 	move.l	#0x80000200, %d0		/* Setup cache mask */

cpu/mcf5445x/config.mk

@@ -24,4 +24,8 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC
+else
 PLATFORM_CPPFLAGS += -m5407 -fPIC
+endif

cpu/mcf5445x/start.S

@@ -136,7 +136,7 @@ _start:
 	movec	%d0, %VBR
 
 	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
-	movec	%d0, %RAMBAR0
+	movec	%d0, %RAMBAR1
 
 	/* initialize general use internal ram */
 	move.l #0, %d0

cpu/microblaze/cache.c

@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2007 Michal Simek
  *
- * Michal SIMEK <moonstr@monstr.eu>
+ * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

cpu/microblaze/start.S

@@ -33,15 +33,13 @@ _start:
 	addi	r1, r0, CFG_INIT_SP_OFFSET
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 	/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
-	addi	r6, r0, 0xb000	/* hex b000 opcode imm */
+	addi	r6, r0, 0xb0000000	/* hex b000 opcode imm */
-	bslli	r6, r6, 16	/* shift */
 	swi	r6, r0, 0x0	/* reset address */
 	swi	r6, r0, 0x8	/* user vector exception */
 	swi	r6, r0, 0x10	/* interrupt */
 	swi	r6, r0, 0x20	/* hardware exception */
 
-	addi	r6, r0, 0xb808	/* hew b808 opcode brai*/
+	addi	r6, r0, 0xb8080000	/* hew b808 opcode brai*/
-	bslli	r6, r6, 16
 	swi	r6, r0, 0x4	/* reset address */
 	swi	r6, r0, 0xC	/* user vector exception */
 	swi	r6, r0, 0x14	/* interrupt */

cpu/microblaze/timer.c

@@ -33,10 +33,17 @@ void reset_timer (void)
 	timestamp = 0;
 }
 
+#ifdef CFG_TIMER_0
 ulong get_timer (ulong base)
 {
 	return (timestamp - base);
 }
+#else
+ulong get_timer (ulong base)
+{
+	return (timestamp++ - base);
+}
+#endif
 
 void set_timer (ulong t)
 {

cpu/mips/au1x00_eth.c

@@ -90,6 +90,65 @@ mac_fifo_t mac_fifo[NO_OF_FIFOS];
 
 #define MAX_WAIT 1000
 
+#if defined(CONFIG_CMD_MII)
+int  au1x00_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short * value)
+{
+	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
+	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
+	u32 mii_control;
+	unsigned int timedout = 20;
+
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_read busy timeout!!\n");
+			return -1;
+		}
+	}
+
+	mii_control = MAC_SET_MII_SELECT_REG(reg) |
+		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
+
+	*mii_control_reg = mii_control;
+
+	timedout = 20;
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_read busy timeout!!\n");
+			return -1;
+		}
+	}
+	*value = *mii_data_reg;
+	return 0;
+}
+
+int  au1x00_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
+{
+	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
+	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
+	u32 mii_control;
+	unsigned int timedout = 20;
+
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_write busy timeout!!\n");
+			return -1;
+		}
+	}
+
+	mii_control = MAC_SET_MII_SELECT_REG(reg) |
+		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
+
+	*mii_data_reg = value;
+	*mii_control_reg = mii_control;
+	return 0;
+}
+#endif
+
 static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
 	volatile mac_fifo_t *fifo_tx =
 		(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
@@ -249,63 +308,4 @@ int au1x00_enet_initialize(bd_t *bis){
 	return 1;
 }
 
-#if defined(CONFIG_CMD_MII)
-int  au1x00_miiphy_read(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short * value)
-{
-	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
-	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
-	u32 mii_control;
-	unsigned int timedout = 20;
-
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_read busy timeout!!\n");
-			return -1;
-		}
-	}
-
-	mii_control = MAC_SET_MII_SELECT_REG(reg) |
-		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
-
-	*mii_control_reg = mii_control;
-
-	timedout = 20;
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_read busy timeout!!\n");
-			return -1;
-		}
-	}
-	*value = *mii_data_reg;
-	return 0;
-}
-
-int  au1x00_miiphy_write(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
-{
-	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
-	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
-	u32 mii_control;
-	unsigned int timedout = 20;
-
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_write busy timeout!!\n");
-			return;
-		}
-	}
-
-	mii_control = MAC_SET_MII_SELECT_REG(reg) |
-		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
-
-	*mii_data_reg = value;
-	*mii_control_reg = mii_control;
-	return 0;
-}
-#endif
-
 #endif /* CONFIG_AU1X00 */

cpu/mips/cache.S

@@ -22,7 +22,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <config.h>
 #include <version.h>
 #include <asm/regdef.h>
@@ -30,13 +29,11 @@
 #include <asm/addrspace.h>
 #include <asm/cacheops.h>
 
-
 	/* 16KB is the maximum size of instruction and data caches on
 	 * MIPS 4K.
 	 */
 #define MIPS_MAX_CACHE_SIZE	0x4000
 
-
 /*
  * cacheop macro to automate cache operations
  * first some helpers...
@@ -131,7 +128,6 @@ mips_cache_reset:
 	li	t4, CFG_CACHELINE_SIZE
 	move	t5, t4
 
-
 	li	v0, MIPS_MAX_CACHE_SIZE
 
 	/* Now clear that much memory starting from zero.
@@ -139,8 +135,8 @@ mips_cache_reset:
 
 	li	a0, KSEG1
 	addu	a1, a0, v0
-
+2:
-2:	sw	zero, 0(a0)
+	sw	zero, 0(a0)
 	sw	zero, 4(a0)
 	sw	zero, 8(a0)
 	sw	zero, 12(a0)
@@ -202,8 +198,8 @@ mips_cache_reset:
 	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
 
 	j	ra
-	.end  mips_cache_reset
 
+	.end	mips_cache_reset
 
 /*******************************************************************************
 *
@@ -242,7 +238,6 @@ dcache_disable:
 
 	.end	dcache_disable
 
-
 /*******************************************************************************
 *
 * mips_cache_lock - lock RAM area pointed to by a0 in cache.
@@ -266,4 +261,5 @@ mips_cache_lock:
 	icacheop(a0,a1,a2,a3,0x1d)
 
 	j	ra
+
 	.end	mips_cache_lock

cpu/mips/config.mk

@@ -20,8 +20,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-v=$(shell \
+v=$(shell $(AS) --version |grep "GNU assembler" |cut -d. -f2)
-$(CROSS_COMPILE)as --version|grep "GNU assembler"|awk '{print $$3}'|awk -F . '{print $$2}')
 MIPSFLAGS=$(shell \
 if [ "$v" -lt "14" ]; then \
 	echo "-mcpu=4kc"; \
@@ -35,6 +34,6 @@ else
 ENDIANNESS = -EB
 endif
 
-MIPSFLAGS += $(ENDIANNESS) -mabicalls
+MIPSFLAGS += $(ENDIANNESS)
 
 PLATFORM_CPPFLAGS += $(MIPSFLAGS)

cpu/mips/cpu.c

@@ -39,12 +39,12 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-void flush_cache (ulong start_addr, ulong size)
+void flush_cache(ulong start_addr, ulong size)
 {
-
 }
 
-void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ){
+void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
+{
 	write_32bit_cp0_register(CP0_ENTRYLO0, low0);
 	write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
 	write_32bit_cp0_register(CP0_ENTRYLO1, low1);

cpu/mips/start.S

@@ -22,13 +22,11 @@
  * MA 02111-1307 USA
  */
 
-
 #include <config.h>
 #include <version.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 
-
 #define RVECENT(f,n) \
    b f; nop
 #define XVECENT(f,bev) \
@@ -234,15 +232,13 @@ reset:
 	li	t0, CONF_CM_UNCACHED
 	mtc0	t0, CP0_CONFIG
 
-	/* Initialize GOT pointer.
+	/* Initialize $gp.
 	 */
 	bal	1f
 	nop
-	.word   _GLOBAL_OFFSET_TABLE_
+	.word	_gp
-	1:
+1:
-	move    gp, ra
+	lw	gp, 0(ra)
-	lw      t1, 0(ra)
-	move	gp, t1
 
 #ifdef CONFIG_INCA_IP
 	/* Disable INCA-IP Watchdog.
@@ -269,7 +265,6 @@ reset:
 	li	t0, CONF_CM_CACHABLE_NONCOHERENT
 	mtc0	t0, CP0_CONFIG
 
-
 	/* Set up temporary stack.
 	 */
 	li	a0, CFG_INIT_SP_OFFSET
@@ -284,7 +279,6 @@ reset:
 	j	t9
 	nop
 
-
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
@@ -306,9 +300,9 @@ relocate_code:
 	move	t1, a2
 
 	/*
-	 * Fix GOT pointer:
+	 * Fix $gp:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New $gp = (Old $gp - CFG_MONITOR_BASE) + Destination Address
 	 */
 	move	t6, gp
 	sub	gp, CFG_MONITOR_BASE
@@ -341,15 +335,22 @@ relocate_code:
 	j	t0
 	nop
 
+	.gpword	_GLOBAL_OFFSET_TABLE_	/* _GLOBAL_OFFSET_TABLE_ - _gp	*/
 	.word	uboot_end_data
 	.word	uboot_end
 	.word	num_got_entries
 
 in_ram:
-	/* Now we want to update GOT.
+	/*
+	 * Now we want to update GOT.
+	 *
+	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+	 * generated by GNU ld. Skip these reserved entries from relocation.
 	 */
 	lw	t3, -4(t0)	/* t3 <-- num_got_entries	*/
-	addi	t4, gp, 8	/* Skipping first two entries.	*/
+	lw	t4, -16(t0)	/* t4 <-- (_GLOBAL_OFFSET_TABLE_ - _gp)	*/
+	add	t4, t4, gp	/* t4 now holds _GLOBAL_OFFSET_TABLE_	*/
+	addi	t4, t4, 8	/* Skipping first two entries.	*/
 	li	t2, 2
 1:
 	lw	t1, 0(t4)
@@ -369,7 +370,8 @@ in_ram:
 	add	t2, t6
 
 	sub	t1, 4
-1:	addi	t1, 4
+1:
+	addi	t1, 4
 	bltl	t1, t2, 1b
 	sw	zero, 0(t1)	/* delay slot			*/
 
@@ -380,7 +382,6 @@ in_ram:
 
 	.end	relocate_code
 
-
 	/* Exception handlers.
 	 */
 romReserved: