liliana/r-link-uboot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge git://www.denx.de/git/u-boot

Browse Source
This commit is contained in:
Stefan Roese 2007-10-27 13:43:40 +02:00
commit 4980102871
38 changed files with 570 additions and 225 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

309
CHANGELOG
View File

@ -1,3 +1,267 @@
commit 58b74b05c621e2835ecf4e2d3243042cf4186777
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri Oct 19 00:09:05 2007 +0200
Fix missing drivers makefile entries ds1722.c mw_eeprom.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 96455bfebc9887837095c9051d216f53c61b5f10
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri Oct 19 00:07:39 2007 +0200
Fix warning differ in signedness in board/innokom/innokom.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
Author: Marcel Ziswiler <marcel@ziswiler.com>
Date: Fri Oct 19 00:25:33 2007 +0200
fix pxa255_idp board
The pxa255_idp being an old unmaintained board showed several issues:
1. CONFIG_INIT_CRITICAL was still defined.
2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
3. Symbol flash_addr was undeclared.
4. The boards lowlevel_init function was still called memsetup.
5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
6. Using -march=armv5 instead of -march=armv5te resulted in lots of
'target CPU does not support interworking' warnings on recent compilers.
7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
indexes rather than the register definitions from the pxa-regs header
file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
avoid any ambiguities.
8. There were several redefinition warnings concerning ICMR, OSMR3,
OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
9. The board configuration file was rather outdated.
10. The part header file defined the vendor, product and revision arrays
as unsigned chars instead of just chars in the block_dev_desc_t
structure.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
Author: Rune Torgersen <runet@innovsys.com>
Date: Wed Oct 17 11:56:31 2007 -0500
Make MPC8266ADS command selection more robust
Fix MPC8266 command line definition so it won't break when new commands
are added to u-boot.
Signed-off-by Rune Torgersen <runet@innovsys.com>
commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Oct 21 01:01:17 2007 +0200
Minor coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
Author: Vlad Lungu <vlad@comsys.ro>
Date: Thu Oct 4 20:47:10 2007 +0300
Fix NE2000 driver:
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
to do anything in eth_stop() if eth_init() was not called.
Simplified RX path in order to avoid timeouts on really really
fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
clever enough to cope with 1 packet per eth_rx().
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
Author: Detlev Zundel <dzu@denx.de>
Date: Fri Oct 19 16:47:26 2007 +0200
Fix two typos.
Signed-off-by: Detlev Zundel <dzu@denx.de>
commit 281df457c1aa50d2752165d0c5c3282d4027b974
Author: Tony Li <tony.li@freescale.com>
Date: Thu Oct 18 17:47:19 2007 +0800
mpc83xx: Add configure entry for MPC83xx ATM support
Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
Makfile and MAKEALL
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit d2646554f529a9577515eceb0ec5eceee18244ba
Author: Tony Li <tony.li@freescale.com>
Date: Thu Oct 18 17:44:38 2007 +0800
mpc83xx: pq-mds-pib.c typo error
Correct to val8 from val.
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 3e11ae80fec1ee12194940955431186abf6009c2
Author: Stefan Roese <sr@denx.de>
Date: Wed Oct 17 15:40:19 2007 +0200
ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
Signed-off-by: Stefan Roese <sr@denx.de>
commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
Author: runet@innovsys.com <runet@innovsys.com>
Date: Tue Oct 16 14:50:40 2007 -0500
Make MPC8266ADS board compile again.
Signed-off-by: Runet Torgersen <runet@innovsys.com>
commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
Author: Jon Loeliger <jdl@freescale.com>
Date: Mon Aug 27 12:41:03 2007 -0500
86xx: Allow for fewer DDR slots per memory controller.
As a direct correlation exists between DDR DIMM slots
and SPD EEPROM addresses used to configure them, use
the individually defined SPD_EEPROM_ADDRESS* values to
determine if a DDR DIMM slot should have its SPD
configuration read or not.
Effectively, this now allows for 1 or 2 DIMM slots
per memory controller.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 4d4a945e189a2f384c66432316da2788a0ac1607
Author: Rodolfo Giometti <giometti@enneenne.com>
Date: Mon Oct 15 11:59:17 2007 +0200
PXA USB OHCI: "usb stop" implementation.
Some USB keys need to be switched off before loading the kernel
otherwise they can remain in an undefined status which prevents them
to be correctly recognized by the kernel.
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
commit e2e93442e558cf1500e92861f99713b2f045ea22
Author: Stefan Roese <sr@denx.de>
Date: Mon Oct 15 11:39:00 2007 +0200
ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
The I2C bootstrap values that can be setup via the "bootstrap" command,
were setup incorrect regarding the generation of the internal sync PCI
clock. The values for PLB clock == 133MHz were slighly incorrect and the
values for PLB clock == 166MHz were totally incorrect. This could
lead to a hangup upon booting while PCI configuration scan.
This patch fixes this issue and configures valid PCI divisor values
for the sync PCI clock, with respect to the provided external async
PCI frequency.
Here the values of the formula in the chapter 14.2 "PCI clocking"
from the 440EPx users manual:
AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
33MHz async PCI frequency:
PLB = 133:
=> 32 <= 44.3 <= 65 (div = 3)
PLB = 166:
=> 32 <= 55.3 <= 65 (div = 3)
66MHz async PCI frequency:
PLB = 133:
=> 65 <= 66.5 <= 132 (div = 2)
PLB = 166:
=> 65 <= 83 <= 132 (div = 2)
Signed-off-by: Stefan Roese <sr@denx.de>
commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
Author: Stefan Roese <sr@denx.de>
Date: Mon Oct 15 11:29:33 2007 +0200
ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
The BCSR status bit for the 66MHz PCI operation was correctly
addressed (MSB/LSB problem). Now the correct currently setup
PCI frequency is displayed upon bootup.
This patch also fixes this problem on Rainier & Yellowstone, since these
boards use the same souce code as Sequoia & Yosemite do.
Signed-off-by: Stefan Roese <sr@denx.de>
commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
Author: Martin Krause <martin.krause@tqs.de>
Date: Wed Sep 26 17:55:56 2007 +0200
TQM860M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
Author: Jens Gehrlein <jens.gehrlein@tqs.de>
Date: Wed Sep 26 17:55:54 2007 +0200
TQM8xx: Fix CAN timing.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit d43e489baf02afae49077791fb22332d240d8656
Author: Martin Krause <martin.krause@tqs.de>
Date: Thu Sep 27 14:54:36 2007 +0200
TQM866M: fix SDRAM refresh
At 133 MHz the current SDRAM refresh rate is too fast
(measured 4 * 1.17 us).
CFG_MAMR_PTA changes from 39 to 97. This result
in a refresh rate of 4 * 7.8 us at the default clock
50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
This is a compromise until a new method is found to
adjust the refresh rate.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit 9ef57bbee1c67cc01da2026c242c4692db32be36
Author: Martin Krause <martin.krause@tqs.de>
Date: Wed Sep 26 17:55:55 2007 +0200
TQM866M: adjust for doubled flash sector size.
Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
Author: Michal Simek <monstr@monstr.eu>
Date: Sun Oct 14 16:12:29 2007 +0200
[FIX] XUPV2P change command handling
and remove code violation
commit 636400198228d96983c06657b17f760f5989958e
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Oct 14 00:13:19 2007 +0200
Prepare for 1.3.0-rc3 release
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 68f14f77ca5fe5f9cc025c8cae101671f628309f commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Sep 29 13:41:37 2007 +0200 Date: Sat Sep 29 13:41:37 2007 +0200
@ -109,6 +373,26 @@ Date: Mon Oct 1 09:51:50 2007 +0200
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
Author: Timo Ketola <timo.ketola@exertus.fi>
Date: Mon Sep 24 14:50:32 2007 +0300
Bugfix: Use only one PTD for one endpoint
Original isp116x-hcd code prepared multiple PTDs for longer than 16
byte transfers for one endpoint. That is unnecessary because the
ISP116x is able to split long data from one PTD into multiple
transactions based on the buffer size of the endpoint. It also caused
serious problems if the endpoint NAKed some of the transactions. In
that case ISP116x wouldn't notice that the other PTDs were for the same
endpoint and would try the other PTDs possibly out of order. That would
break the whole transfer.
This patch makes isp116x_submit_job to use one PTD for one transfer.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
commit 86ec86c04326c3913178a7679aa910de071da75d commit 86ec86c04326c3913178a7679aa910de071da75d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Thu Sep 27 23:27:47 2007 +0200 Date: Thu Sep 27 23:27:47 2007 +0200
@ -331,6 +615,12 @@ Date: Mon Sep 10 17:13:49 2007 +0900
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
Author: Michal Simek <monstr@monstr.eu>
Date: Sun Sep 16 20:51:57 2007 +0200
[FIX] remove files form repository
commit 67c31036acaaaa992fc346cc89db0909a7e733c4 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
Author: Wolfgang Denk <wd@denx.de> Author: Wolfgang Denk <wd@denx.de>
Date: Sun Sep 16 17:10:04 2007 +0200 Date: Sun Sep 16 17:10:04 2007 +0200
@ -478,6 +768,25 @@ Date: Sat Sep 15 11:55:42 2007 +0200
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
Author: Michal Simek <monstr@monstr.eu>
Date: Sat Sep 15 00:03:35 2007 +0200
Synchronize with U-BOOT mainline
commit d7fee32b7e61fe11c64e371cde79faa4768e8350
Author: Sam Sparks <SSparks@twacs.com>
Date: Fri Sep 14 11:14:42 2007 -0600
Update MPC8349ITX*_config to place config.tmp in right place.
MPC834ITX*_config does not store config.tmp at the correct locatation,
causing MPC8349ITXGP to have the wrong TEXT_BASE.
Signed-off-by: Sam Sparks <SSparks@twacs.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
Author: Bartlomiej Sieka <tur@semihalf.com> Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Thu Sep 13 18:21:48 2007 +0200 Date: Thu Sep 13 18:21:48 2007 +0200

2
MAKEALL
View File

@ -301,10 +301,12 @@ LIST_83xx=" \
MPC8313ERDB_66 \ MPC8313ERDB_66 \
MPC8323ERDB \ MPC8323ERDB \
MPC832XEMDS \ MPC832XEMDS \
MPC832XEMDS_ATM \
MPC8349EMDS \ MPC8349EMDS \
MPC8349ITX \ MPC8349ITX \
MPC8349ITXGP \ MPC8349ITXGP \
MPC8360EMDS \ MPC8360EMDS \
MPC8360EMDS_ATM \
sbc8349 \ sbc8349 \
TQM834x \ TQM834x \
" "

36
Makefile
View File

@ -393,7 +393,7 @@ BC3450_config: unconfig
cpci5200_config: unconfig cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
hmi1001_config: unconfig hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \ Lite5200_config \
@ -435,7 +435,7 @@ icecube_5100_config: unconfig
} }
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
jupiter_config: unconfig jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig v38b_config: unconfig
@ -640,9 +640,9 @@ TQM5200_STK100_config: unconfig
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
} }
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
uc101_config: unconfig uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101 @$(MKCONFIG) uc101 ppc mpc5xxx uc101
motionpro_config: unconfig motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
@ -930,7 +930,7 @@ RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \ RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \ RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig RPXlite_DW_config: unconfig
@mkdir -p $(obj)include @mkdir -p $(obj)include
@ >$(obj)include/config.h @ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \ @[ -z "$(findstring _64,$@)" ] || \
@ -1766,7 +1766,8 @@ MPC8323ERDB_config: unconfig
MPC832XEMDS_config \ MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \ MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config: unconfig MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include @mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \ if [ "$(findstring _HOST_,$@)" ] ; then \
@ -1781,10 +1782,17 @@ MPC832XEMDS_SLAVE_config: unconfig
if [ "$(findstring _33_,$@)" ] ; then \ if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \ echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \ fi ; \
if [ "$(findstring _66_,$@)" ] ; then \ if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \ echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
echo -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ; fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
@ -1808,7 +1816,8 @@ MPC8349ITXGP_config: unconfig
MPC8360EMDS_config \ MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \ MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \ MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config: unconfig MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include @mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \ if [ "$(findstring _HOST_,$@)" ] ; then \
@ -1823,10 +1832,17 @@ MPC8360EMDS_SLAVE_config: unconfig
if [ "$(findstring _33_,$@)" ] ; then \ if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \ echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \ fi ; \
if [ "$(findstring _66_,$@)" ] ; then \ if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \ echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
echo -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ; fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
@ -1985,13 +2001,13 @@ AmigaOneG3SE_config: unconfig
BAB7xx_config: unconfig BAB7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig CPCI750_config: unconfig
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
DB64360_config: unconfig DB64360_config: unconfig
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
DB64460_config: unconfig DB64460_config: unconfig
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig ELPPC_config: unconfig

22
board/freescale/common/pq-mds-pib.c
View File

@ -79,19 +79,19 @@ int pib_init(void)
printf("QOC3 ATM card on PMC0\n"); printf("QOC3 ATM card on PMC0\n");
#elif defined(CONFIG_MPC832XEMDS) #elif defined(CONFIG_MPC832XEMDS)
val = 0; val8 = 0;
i2c_write(0x26, 0x7, 1, &val, 1); i2c_write(0x26, 0x7, 1, &val8, 1);
val = 0xf7; val8 = 0xf7;
i2c_write(0x26, 0x3, 1, &val, 1); i2c_write(0x26, 0x3, 1, &val8, 1);
val = 0; val8 = 0;
i2c_write(0x21, 0x6, 1, &val, 1); i2c_write(0x21, 0x6, 1, &val8, 1);
i2c_write(0x21, 0x7, 1, &val, 1); i2c_write(0x21, 0x7, 1, &val8, 1);
val = 0xdf; val8 = 0xdf;
i2c_write(0x21, 0x2, 1, &val, 1); i2c_write(0x21, 0x2, 1, &val8, 1);
val = 0xef; val8 = 0xef;
i2c_write(0x21, 0x3, 1, &val, 1); i2c_write(0x21, 0x3, 1, &val8, 1);
eieio(); eieio();

2
board/innokom/innokom.c
View File

@ -72,7 +72,7 @@ int i2c_init_board(void)
int misc_init_r(void) int misc_init_r(void)
{ {
uchar *str; char *str;
/* determine if the software update key is pressed during startup */ /* determine if the software update key is pressed during startup */
if (GPLR0 & 0x00000800) { if (GPLR0 & 0x00000800) {

6
board/motionpro/motionpro.c
View File

@ -138,6 +138,12 @@ long int initdram(int board_type)
#ifndef CFG_RAMBOOT #ifndef CFG_RAMBOOT
ulong test1, test2; ulong test1, test2;
/* According to AN3221 (MPC5200B SDRAM Initialization and
* Configuration), the SDelay register must be written a value of
* 0x00000004 as the first step of the SDRAM contorller configuration.
*/
*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
/* configure SDRAM start/end for detection */ /* configure SDRAM start/end for detection */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */

2
board/pxa255_idp/Makefile
View File

@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a LIB = $(obj)lib$(BOARD).a
COBJS := pxa_idp.o COBJS := pxa_idp.o
SOBJS := memsetup.o SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS)) OBJS := $(addprefix $(obj),$(COBJS))

2
board/pxa255_idp/config.mk
View File

@ -1,3 +1,3 @@
#TEXT_BASE = 0xa1700000 #TEXT_BASE = 0xa1700000
TEXT_BASE = 0xa3000000 TEXT_BASE = 0xa3080000
#TEXT_BASE = 0 #TEXT_BASE = 0

10
board/pxa255_idp/memsetup.S → board/pxa255_idp/lowlevel_init.S
View File

@ -3,7 +3,7 @@
* *
* NOTE: I haven't clean this up considerably, just enough to get it * NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See * running. See hal_platform_setup.h for the source. See
* board/cradle/memsetup.S for another PXA250 setup that is * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner. * much cleaner.
* *
* See file CREDITS for list of people who contributed to this * See file CREDITS for list of people who contributed to this
@ -41,8 +41,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
/* /*
* Memory setup * Memory setup
*/ */
.globl memsetup .globl lowlevel_init
memsetup: lowlevel_init:
mov r10, lr mov r10, lr
@ -395,7 +395,7 @@ initclks:
/* Save SDRAM size */ /* Save SDRAM size */
ldr r1, =DRAM_SIZE ldr r1, =DRAM_SIZE
str r8, [r1] str r8, [r1]
/* Interrupt init: Mask all interrupts */ /* Interrupt init: Mask all interrupts */
ldr r0, =ICMR /* enable no sources */ ldr r0, =ICMR /* enable no sources */
@ -426,7 +426,7 @@ initclks:
bl blink bl blink
#endif #endif
endmemsetup: endlowlevel_init:
mov pc, r10 mov pc, r10

1
board/pxa255_idp/u-boot.lds
View File

@ -44,6 +44,7 @@ SECTIONS
. = ALIGN(4); . = ALIGN(4);
.got : { *(.got) } .got : { *(.got) }
. = .;
__u_boot_cmd_start = .; __u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) } .u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .; __u_boot_cmd_end = .;

17
board/tqm5200/cmd_stk52xx.c
View File

@ -561,7 +561,7 @@ void led_init(void)
gpt->gpt6.emsr |= 0x00000024; gpt->gpt6.emsr |= 0x00000024;
gpt->gpt7.emsr |= 0x00000024; gpt->gpt7.emsr |= 0x00000024;
#ifndef CONFIG_TQM5200S
/* enable SM501 GPIO control (in both power modes) */ /* enable SM501 GPIO control (in both power modes) */
*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
POWER_MODE_GATE_GPIO_PWM_I2C; POWER_MODE_GATE_GPIO_PWM_I2C;
@ -574,6 +574,7 @@ void led_init(void)
/* configure SM501 gpio pins 48-51 as output */ /* configure SM501 gpio pins 48-51 as output */
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16); *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
#endif /* !CONFIG_TQM5200S */
} }
/* /*
@ -650,7 +651,7 @@ int do_led(char *argv[])
gpt->gpt7.emsr &= ~(1 << 4); gpt->gpt7.emsr &= ~(1 << 4);
} }
break; break;
#ifndef CONFIG_TQM5200S
case 24: case 24:
if (strcmp (argv[3], "on") == 0) { if (strcmp (argv[3], "on") == 0) {
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@ -730,7 +731,7 @@ int do_led(char *argv[])
~(0x1 << 19); ~(0x1 << 19);
} }
break; break;
#endif /* !CONFIG_TQM5200S */
default: default:
printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]); printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
return 1; return 1;
@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
return error_status; return error_status;
} }
#ifndef CONFIG_FO300 #if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
static void sm501_backlight (unsigned int state) static void sm501_backlight (unsigned int state)
{ {
if (state == BL_ON) { if (state == BL_ON) {
@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
~((1 << 26) | (1 << 27)); ~((1 << 26) | (1 << 27));
} }
#endif #endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{ {
@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else else
printf ("Error\n"); printf ("Error\n");
return rcode; return rcode;
#ifndef CONFIG_FO300 #if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
} else if (strncmp (argv[1], "backlight", 4) == 0) { } else if (strncmp (argv[1], "backlight", 4) == 0) {
if (strncmp (argv[2], "on", 2) == 0) { if (strncmp (argv[2], "on", 2) == 0) {
sm501_backlight (BL_ON); sm501_backlight (BL_ON);
@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
sm501_backlight (BL_OFF); sm501_backlight (BL_OFF);
return 0; return 0;
} }
#endif #endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
} }
break; break;
@ -1228,8 +1229,10 @@ U_BOOT_CMD(
" - loopback plug for X83 required\n" " - loopback plug for X83 required\n"
"fkt rs232 number\n" "fkt rs232 number\n"
" - loopback plug(s) for X2 required\n" " - loopback plug(s) for X2 required\n"
#ifndef CONFIG_TQM5200S
"fkt backlight on/off\n" "fkt backlight on/off\n"
" - switch backlight on or off\n" " - switch backlight on or off\n"
#endif /* !CONFIG_TQM5200S */
); );
#elif defined(CONFIG_FO300) #elif defined(CONFIG_FO300)
U_BOOT_CMD( U_BOOT_CMD(

2
board/tqm5200/tqm5200.c
View File

@ -543,6 +543,7 @@ int last_stage_init (void)
__asm__ volatile ("sync"); __asm__ volatile ("sync");
} }
#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */
/* /*
* Check for Grafic Controller * Check for Grafic Controller
*/ */
@ -586,6 +587,7 @@ int last_stage_init (void)
#endif #endif
return 0; return 0;
#endif /* !CONFIG_TQM5200S */
} }
#ifdef CONFIG_VIDEO_SM501 #ifdef CONFIG_VIDEO_SM501

16
board/tqm8xx/tqm8xx.c
View File

@ -354,6 +354,8 @@ long int initdram (int board_type)
udelay (10000); udelay (10000);
#ifdef CONFIG_CAN_DRIVER #ifdef CONFIG_CAN_DRIVER
/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
/* Initialize OR3 / BR3 */ /* Initialize OR3 / BR3 */
memctl->memc_or3 = CFG_OR3_CAN; memctl->memc_or3 = CFG_OR3_CAN;
memctl->memc_br3 = CFG_BR3_CAN; memctl->memc_br3 = CFG_BR3_CAN;
@ -362,7 +364,7 @@ long int initdram (int board_type)
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
/* Initialize UPMB for CAN: single read */ /* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004; memctl->memc_mdr = 0xFFFFCC04;
memctl->memc_mcr = 0x0100 | UPMB; memctl->memc_mcr = 0x0100 | UPMB;
memctl->memc_mdr = 0x0FFFD004; memctl->memc_mdr = 0x0FFFD004;
@ -374,23 +376,23 @@ long int initdram (int board_type)
memctl->memc_mdr = 0x3FFFC004; memctl->memc_mdr = 0x3FFFC004;
memctl->memc_mcr = 0x0103 | UPMB; memctl->memc_mcr = 0x0103 | UPMB;
memctl->memc_mdr = 0xFFFFDC05; memctl->memc_mdr = 0xFFFFDC07;
memctl->memc_mcr = 0x0104 | UPMB; memctl->memc_mcr = 0x0104 | UPMB;
/* Initialize UPMB for CAN: single write */ /* Initialize UPMB for CAN: single write */
memctl->memc_mdr = 0xFFFCC004; memctl->memc_mdr = 0xFFFCCC04;
memctl->memc_mcr = 0x0118 | UPMB; memctl->memc_mcr = 0x0118 | UPMB;
memctl->memc_mdr = 0xCFFCD004; memctl->memc_mdr = 0xCFFCDC04;
memctl->memc_mcr = 0x0119 | UPMB; memctl->memc_mcr = 0x0119 | UPMB;
memctl->memc_mdr = 0x0FFCC000; memctl->memc_mdr = 0x3FFCC000;
memctl->memc_mcr = 0x011A | UPMB; memctl->memc_mcr = 0x011A | UPMB;
memctl->memc_mdr = 0x7FFCC004; memctl->memc_mdr = 0xFFFCC004;
memctl->memc_mcr = 0x011B | UPMB; memctl->memc_mcr = 0x011B | UPMB;
memctl->memc_mdr = 0xFFFDCC05; memctl->memc_mdr = 0xFFFDC405;
memctl->memc_mcr = 0x011C | UPMB; memctl->memc_mcr = 0x011C | UPMB;
#endif /* CONFIG_CAN_DRIVER */ #endif /* CONFIG_CAN_DRIVER */

4
board/xsengine/flash.c
View File

@ -46,11 +46,11 @@ unsigned long flash_init (void)
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
switch (i) { switch (i) {
case 0: case 0:
flash_get_size ((long *) PHYS_FLASH_1, &flash_info[i]); flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
break; break;
case 1: case 1:
flash_get_size ((long *) PHYS_FLASH_2, &flash_info[i]); flash_get_size ((vu_long *) PHYS_FLASH_2, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
break; break;
default: default:

2
common/cmd_bootm.c
View File

@ -466,7 +466,7 @@ U_BOOT_CMD(
"\t'arg' can be the address of an initrd image\n" "\t'arg' can be the address of an initrd image\n"
#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) #if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)
"\tWhen booting a Linux kernel which requires a flat device-tree\n" "\tWhen booting a Linux kernel which requires a flat device-tree\n"
"\ta third argument is required which is the address of the of the\n" "\ta third argument is required which is the address of the\n"
"\tdevice-tree blob. To boot that kernel without an initrd image,\n" "\tdevice-tree blob. To boot that kernel without an initrd image,\n"
"\tuse a '-' for the second argument. If you do not pass a third\n" "\tuse a '-' for the second argument. If you do not pass a third\n"
"\ta bd_info struct will be passed instead\n" "\ta bd_info struct will be passed instead\n"

2
common/cmd_dtt.c
View File

@ -57,7 +57,7 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
dtt, 1, 1, do_dtt, dtt, 1, 1, do_dtt,
"dtt - Digital Thermometer and Themostat\n", "dtt - Digital Thermometer and Thermostat\n",
" - Read temperature from digital thermometer and thermostat.\n" " - Read temperature from digital thermometer and thermostat.\n"
); );

8
cpu/arm920t/at91rm9200/usb.c
View File

@ -28,7 +28,7 @@
#include <asm/arch/hardware.h> #include <asm/arch/hardware.h>
int usb_cpu_init() int usb_cpu_init(void)
{ {
/* Enable USB host clock. */ /* Enable USB host clock. */
*AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */ *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
@ -36,7 +36,7 @@ int usb_cpu_init()
return 0; return 0;
} }
int usb_cpu_stop() int usb_cpu_stop(void)
{ {
/* Initialization failed */ /* Initialization failed */
*AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */ *AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */
@ -44,9 +44,9 @@ int usb_cpu_stop()
return 0; return 0;
} }
int usb_cpu_init_fail() int usb_cpu_init_fail(void)
{ {
usb_cpu_stop(); return usb_cpu_stop();
} }
# endif /* CONFIG_AT91RM9200 */ # endif /* CONFIG_AT91RM9200 */

3
cpu/pxa/config.mk
View File

@ -25,8 +25,7 @@
PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
-msoft-float -msoft-float
#PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100 PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
PLATFORM_CPPFLAGS += -march=armv5 -mtune=xscale
# ========================================================================= # =========================================================================
# #
# Supply options according to compiler version # Supply options according to compiler version

72
cpu/pxa/serial.c
View File

@ -35,17 +35,17 @@
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
#define FFUART 0 #define FFUART_INDEX 0
#define BTUART 1 #define BTUART_INDEX 1
#define STUART 2 #define STUART_INDEX 2
#ifndef CONFIG_SERIAL_MULTI #ifndef CONFIG_SERIAL_MULTI
#if defined (CONFIG_FFUART) #if defined (CONFIG_FFUART)
#define UART_INDEX FFUART #define UART_INDEX FFUART_INDEX
#elif defined (CONFIG_BTUART) #elif defined (CONFIG_BTUART)
#define UART_INDEX BTUART #define UART_INDEX BTUART_INDEX
#elif defined (CONFIG_STUART) #elif defined (CONFIG_STUART)
#define UART_INDEX STUART #define UART_INDEX STUART_INDEX
#else #else
#error "Bad: you didn't configure serial ..." #error "Bad: you didn't configure serial ..."
#endif #endif
@ -71,7 +71,7 @@ void pxa_setbrg_dev (unsigned int uart_index)
hang (); hang ();
switch (uart_index) { switch (uart_index) {
case FFUART: case FFUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS #ifdef CONFIG_CPU_MONAHANS
CKENA |= CKENA_22_FFUART; CKENA |= CKENA_22_FFUART;
#else #else
@ -90,7 +90,7 @@ void pxa_setbrg_dev (unsigned int uart_index)
FFIER = IER_UUE; /* Enable FFUART */ FFIER = IER_UUE; /* Enable FFUART */
break; break;
case BTUART: case BTUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS #ifdef CONFIG_CPU_MONAHANS
CKENA |= CKENA_21_BTUART; CKENA |= CKENA_21_BTUART;
#else #else
@ -110,7 +110,7 @@ void pxa_setbrg_dev (unsigned int uart_index)
break; break;
case STUART: case STUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS #ifdef CONFIG_CPU_MONAHANS
CKENA |= CKENA_23_STUART; CKENA |= CKENA_23_STUART;
#else #else
@ -154,20 +154,20 @@ int pxa_init_dev (unsigned int uart_index)
void pxa_putc_dev (unsigned int uart_index,const char c) void pxa_putc_dev (unsigned int uart_index,const char c)
{ {
switch (uart_index) { switch (uart_index) {
case FFUART: case FFUART_INDEX:
/* wait for room in the tx FIFO on FFUART */ /* wait for room in the tx FIFO on FFUART */
while ((FFLSR & LSR_TEMT) == 0) while ((FFLSR & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
FFTHR = c; FFTHR = c;
break; break;
case BTUART: case BTUART_INDEX:
while ((BTLSR & LSR_TEMT ) == 0 ) while ((BTLSR & LSR_TEMT ) == 0 )
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
BTTHR = c; BTTHR = c;
break; break;
case STUART: case STUART_INDEX:
while ((STLSR & LSR_TEMT ) == 0 ) while ((STLSR & LSR_TEMT ) == 0 )
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
STTHR = c; STTHR = c;
@ -187,11 +187,11 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
int pxa_tstc_dev (unsigned int uart_index) int pxa_tstc_dev (unsigned int uart_index)
{ {
switch (uart_index) { switch (uart_index) {
case FFUART: case FFUART_INDEX:
return FFLSR & LSR_DR; return FFLSR & LSR_DR;
case BTUART: case BTUART_INDEX:
return BTLSR & LSR_DR; return BTLSR & LSR_DR;
case STUART: case STUART_INDEX:
return STLSR & LSR_DR; return STLSR & LSR_DR;
} }
return -1; return -1;
@ -205,16 +205,16 @@ int pxa_tstc_dev (unsigned int uart_index)
int pxa_getc_dev (unsigned int uart_index) int pxa_getc_dev (unsigned int uart_index)
{ {
switch (uart_index) { switch (uart_index) {
case FFUART: case FFUART_INDEX:
while (!(FFLSR & LSR_DR)) while (!(FFLSR & LSR_DR))
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
return (char) FFRBR & 0xff; return (char) FFRBR & 0xff;
case BTUART: case BTUART_INDEX:
while (!(BTLSR & LSR_DR)) while (!(BTLSR & LSR_DR))
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
return (char) BTRBR & 0xff; return (char) BTRBR & 0xff;
case STUART: case STUART_INDEX:
while (!(STLSR & LSR_DR)) while (!(STLSR & LSR_DR))
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
return (char) STRBR & 0xff; return (char) STRBR & 0xff;
@ -233,32 +233,32 @@ pxa_puts_dev (unsigned int uart_index,const char *s)
#if defined (CONFIG_FFUART) #if defined (CONFIG_FFUART)
static int ffuart_init(void) static int ffuart_init(void)
{ {
return pxa_init_dev(FFUART); return pxa_init_dev(FFUART_INDEX);
} }
static void ffuart_setbrg(void) static void ffuart_setbrg(void)
{ {
return pxa_setbrg_dev(FFUART); return pxa_setbrg_dev(FFUART_INDEX);
} }
static void ffuart_putc(const char c) static void ffuart_putc(const char c)
{ {
return pxa_putc_dev(FFUART,c); return pxa_putc_dev(FFUART_INDEX,c);
} }
static void ffuart_puts(const char *s) static void ffuart_puts(const char *s)
{ {
return pxa_puts_dev(FFUART,s); return pxa_puts_dev(FFUART_INDEX,s);
} }
static int ffuart_getc(void) static int ffuart_getc(void)
{ {
return pxa_getc_dev(FFUART); return pxa_getc_dev(FFUART_INDEX);
} }
static int ffuart_tstc(void) static int ffuart_tstc(void)
{ {
return pxa_tstc_dev(FFUART); return pxa_tstc_dev(FFUART_INDEX);
} }
struct serial_device serial_ffuart_device = struct serial_device serial_ffuart_device =
@ -277,32 +277,32 @@ struct serial_device serial_ffuart_device =
#if defined (CONFIG_BTUART) #if defined (CONFIG_BTUART)
static int btuart_init(void) static int btuart_init(void)
{ {
return pxa_init_dev(BTUART); return pxa_init_dev(BTUART_INDEX);
} }
static void btuart_setbrg(void) static void btuart_setbrg(void)
{ {
return pxa_setbrg_dev(BTUART); return pxa_setbrg_dev(BTUART_INDEX);
} }
static void btuart_putc(const char c) static void btuart_putc(const char c)
{ {
return pxa_putc_dev(BTUART,c); return pxa_putc_dev(BTUART_INDEX,c);
} }
static void btuart_puts(const char *s) static void btuart_puts(const char *s)
{ {
return pxa_puts_dev(BTUART,s); return pxa_puts_dev(BTUART_INDEX,s);
} }
static int btuart_getc(void) static int btuart_getc(void)
{ {
return pxa_getc_dev(BTUART); return pxa_getc_dev(BTUART_INDEX);
} }
static int btuart_tstc(void) static int btuart_tstc(void)
{ {
return pxa_tstc_dev(BTUART); return pxa_tstc_dev(BTUART_INDEX);
} }
struct serial_device serial_btuart_device = struct serial_device serial_btuart_device =
@ -321,32 +321,32 @@ struct serial_device serial_btuart_device =
#if defined (CONFIG_STUART) #if defined (CONFIG_STUART)
static int stuart_init(void) static int stuart_init(void)
{ {
return pxa_init_dev(STUART); return pxa_init_dev(STUART_INDEX);
} }
static void stuart_setbrg(void) static void stuart_setbrg(void)
{ {
return pxa_setbrg_dev(STUART); return pxa_setbrg_dev(STUART_INDEX);
} }
static void stuart_putc(const char c) static void stuart_putc(const char c)
{ {
return pxa_putc_dev(STUART,c); return pxa_putc_dev(STUART_INDEX,c);
} }
static void stuart_puts(const char *s) static void stuart_puts(const char *s)
{ {
return pxa_puts_dev(STUART,s); return pxa_puts_dev(STUART_INDEX,s);
} }
static int stuart_getc(void) static int stuart_getc(void)
{ {
return pxa_getc_dev(STUART); return pxa_getc_dev(STUART_INDEX);
} }
static int stuart_tstc(void) static int stuart_tstc(void)
{ {
return pxa_tstc_dev(STUART); return pxa_tstc_dev(STUART_INDEX);
} }
struct serial_device serial_stuart_device = struct serial_device serial_stuart_device =

6
cpu/pxa/start.S
View File

@ -166,13 +166,17 @@ _start_armboot: .word start_armboot
/* */ /* */
/****************************************************************************/ /****************************************************************************/
/* mk@tbd: Fix this! */ /* mk@tbd: Fix this! */
#ifdef CONFIG_CPU_MONAHANS #if defined(CONFIG_PXA250) || defined(CONFIG_CPU_MONAHANS)
#undef ICMR #undef ICMR
#undef OSMR3 #undef OSMR3
#undef OSCR #undef OSCR
#undef OWER #undef OWER
#undef OIER #undef OIER
#endif #endif
#ifdef CONFIG_PXA250
#undef RCSR
#undef CCCR
#endif
/* Interrupt-Controller base address */ /* Interrupt-Controller base address */
IC_BASE: .word 0x40d00000 IC_BASE: .word 0x40d00000

7
cpu/pxa/usb.c
View File

@ -27,8 +27,9 @@
# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) # if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
#include <asm/arch/pxa-regs.h> #include <asm/arch/pxa-regs.h>
#include <usb.h>
int usb_cpu_init() int usb_cpu_init(void)
{ {
#if defined(CONFIG_CPU_MONAHANS) #if defined(CONFIG_CPU_MONAHANS)
/* Enable USB host clock. */ /* Enable USB host clock. */
@ -65,7 +66,7 @@ int usb_cpu_init()
return 0; return 0;
} }
int usb_cpu_stop() int usb_cpu_stop(void)
{ {
UHCHR |= UHCHR_FHR; UHCHR |= UHCHR_FHR;
udelay(11); udelay(11);
@ -86,7 +87,7 @@ int usb_cpu_stop()
return 0; return 0;
} }
int usb_cpu_init_fail() int usb_cpu_init_fail(void)
{ {
return 0; return 0;
} }

29
drivers/Makefile
View File

@ -1,5 +1,5 @@
# #
# (C) Copyright 2000-2006 # (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# #
# See file CREDITS for list of people who contributed to this # See file CREDITS for list of people who contributed to this
@ -27,34 +27,33 @@ include $(TOPDIR)/config.mk
LIB = $(obj)libdrivers.a LIB = $(obj)libdrivers.a
COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o \
ati_radeon_fb.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o enc28j60.o \ ds1722.o e1000.o eepro100.o enc28j60.o \
i8042.o inca-ip_sw.o isp116x-hcd.o keyboard.o \ fsl_i2c.o fsl_pci_init.o \
lan91c96.o macb.o \ i8042.o inca-ip_sw.o isp116x-hcd.o \
keyboard.o ks8695eth.o \
lan91c96.o macb.o mpc8xx_pcmcia.o mw_eeprom.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \ natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \ ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \ omap24xx_i2c.o pc_keyb.o \
pcnet.o plb2800_eth.o \ pci.o pci_auto.o pci_indirect.o \
ps2ser.o ps2mult.o pc_keyb.o \ pcnet.o plb2800_eth.o ps2ser.o ps2mult.o pxa_pcmcia.o \
rtl8019.o rtl8139.o rtl8169.o \ rpx_pcmcia.o rtl8019.o rtl8139.o rtl8169.o \
s3c4510b_eth.o s3c4510b_uart.o \ s3c4510b_eth.o s3c4510b_uart.o \
sed13806.o sed156x.o \ sed13806.o sed156x.o \
serial.o serial_max3100.o \ serial.o serial_max3100.o \
serial_pl010.o serial_pl011.o serial_xuartlite.o \ serial_pl010.o serial_pl011.o serial_xuartlite.o \
sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o systemace.o ahci.o \ status_led.o sym53c8xx.o systemace.o ahci.o \
ti_pci1410a.o tigon3.o tsec.o \ ti_pci1410a.o tigon3.o tqm8xx_pcmcia.o tsec.o \
tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
usb_ohci.o \ usb_ohci.o \
usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \ usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
usbtty.o \ usbtty.o \
videomodes.o w83c553f.o \ videomodes.o w83c553f.o
ks8695eth.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
rpx_pcmcia.o \
fsl_i2c.o fsl_pci_init.o ati_radeon_fb.o
SRCS := $(COBJS:.o=.c) SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS)) OBJS := $(addprefix $(obj),$(COBJS))

4
drivers/ds1722.c
View File

@ -1,10 +1,10 @@
#include <common.h> #include <common.h>
#include <ssi.h>
#ifdef CONFIG_DS1722 #ifdef CONFIG_DS1722
#include <ssi.h>
static void ds1722_select(int dev) static void ds1722_select(int dev)
{ {
ssi_set_interface(4096, 0, 0, 0); ssi_set_interface(4096, 0, 0, 0);

8
drivers/fsl_pci_init.c
View File

@ -54,6 +54,7 @@ fsl_pci_init(struct pci_controller *hose)
u8 temp8; u8 temp8;
int r; int r;
int bridge; int bridge;
int inbound = 0;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
pci_dev_t dev = PCI_BDF(busno,0,0); pci_dev_t dev = PCI_BDF(busno,0,0);
@ -74,6 +75,7 @@ fsl_pci_init(struct pci_controller *hose)
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
(__ilog2(hose->regions[r].size) - 1); (__ilog2(hose->regions[r].size) - 1);
pi++; pi++;
inbound = hose->regions[r].size > 0;
} else { /* Outbound */ } else { /* Outbound */
po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff; po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
@ -138,6 +140,12 @@ fsl_pci_init(struct pci_controller *hose)
pciauto_setup_device(hose, dev, 0, hose->pci_mem, pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io); hose->pci_prefetch, hose->pci_io);
if (inbound) {
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
pci_hose_write_config_word(hose, dev, PCI_COMMAND,
temp16 | PCI_COMMAND_MEMORY);
}
#ifndef CONFIG_PCI_NOSCAN #ifndef CONFIG_PCI_NOSCAN
printf (" Scanning PCI bus %02x\n", hose->current_busno); printf (" Scanning PCI bus %02x\n", hose->current_busno);
hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);

4
drivers/mw_eeprom.c
View File

@ -1,11 +1,11 @@
/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */ /* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
#include <common.h> #include <common.h>
#include <ssi.h>
#ifdef CONFIG_MW_EEPROM #ifdef CONFIG_MW_EEPROM
#include <ssi.h>
/* /*
* Serial EEPROM opcodes, including start bit * Serial EEPROM opcodes, including start bit
*/ */

38
drivers/ne2000.c
View File

@ -745,17 +745,15 @@ static void pcnet_reset_8390(void)
PRINTK("nic base is %lx\n", nic_base); PRINTK("nic base is %lx\n", nic_base);
#if 1
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD)); PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD); n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD)); PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD)); PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
#endif
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD); n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
n2k_outb(n2k_inb(nic_base + PCNET_RESET), PCNET_RESET); n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
for (i = 0; i < 100; i++) { for (i = 0; i < 100; i++) {
if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0) if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
@ -833,6 +831,7 @@ static int plen[NB];
static int nrx = 0; static int nrx = 0;
static int pkey = -1; static int pkey = -1;
static int initialized=0;
void uboot_push_packet_len(int len) { void uboot_push_packet_len(int len) {
PRINTK("pushed len = %d, nrx = %d\n", len, nrx); PRINTK("pushed len = %d, nrx = %d\n", len, nrx);
@ -846,7 +845,9 @@ void uboot_push_packet_len(int len) {
} }
plen[nrx] = len; plen[nrx] = len;
dp83902a_recv(&pbuf[nrx*2000], len); dp83902a_recv(&pbuf[nrx*2000], len);
nrx++;
/*Just pass it to the upper layer*/
NetReceive(&pbuf[nrx*2000], plen[nrx]);
} }
void uboot_push_tx_done(int key, int val) { void uboot_push_tx_done(int key, int val) {
@ -903,37 +904,21 @@ int eth_init(bd_t *bd) {
if (dp83902a_init() == false) if (dp83902a_init() == false)
return -1; return -1;
dp83902a_start(dev_addr); dp83902a_start(dev_addr);
initialized=1;
return 0; return 0;
} }
void eth_halt() { void eth_halt() {
PRINTK("### eth_halt\n"); PRINTK("### eth_halt\n");
if(initialized)
dp83902a_stop(); dp83902a_stop();
initialized=0;
} }
int eth_rx() { int eth_rx() {
int j, tmo; dp83902a_poll();
return 1;
PRINTK("### eth_rx\n");
tmo = get_timer (0) + TOUT * CFG_HZ;
while(1) {
dp83902a_poll();
if (nrx > 0) {
for(j=0; j<nrx; j++) {
NetReceive(&pbuf[j*2000], plen[j]);
}
nrx = 0;
return 1;
}
if (get_timer (0) >= tmo) {
printf("timeout during rx\n");
return 0;
}
}
return 0;
} }
int eth_send(volatile void *packet, int length) { int eth_send(volatile void *packet, int length) {
@ -959,5 +944,4 @@ int eth_send(volatile void *packet, int length) {
} }
return 0; return 0;
} }
#endif #endif

2
drivers/ne2000.h
View File

@ -42,7 +42,7 @@ are GPL, so this is, of course, GPL.
this file might be covered by the GNU General Public License. this file might be covered by the GNU General Public License.
Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
at http://sources.redhat.com/ecos/ecos-license/ */ at http://sources.redhat.com/ecos/ecos-license/
------------------------------------------- -------------------------------------------
####ECOSGPLCOPYRIGHTEND#### ####ECOSGPLCOPYRIGHTEND####
####BSDCOPYRIGHTBEGIN#### ####BSDCOPYRIGHTBEGIN####

10
include/asm-mips/string.h
View File

@ -19,21 +19,21 @@
extern char *strcpy(char *__dest, __const__ char *__src); extern char *strcpy(char *__dest, __const__ char *__src);
#undef __HAVE_ARCH_STRNCPY #undef __HAVE_ARCH_STRNCPY
extern char *strncpy(char *__dest, __const__ char *__src, size_t __n); extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n);
#undef __HAVE_ARCH_STRCMP #undef __HAVE_ARCH_STRCMP
extern int strcmp(__const__ char *__cs, __const__ char *__ct); extern int strcmp(__const__ char *__cs, __const__ char *__ct);
#undef __HAVE_ARCH_STRNCMP #undef __HAVE_ARCH_STRNCMP
extern int strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count); extern int strncmp(__const__ char *__cs, __const__ char *__ct, __kernel_size_t __count);
#undef __HAVE_ARCH_MEMSET #undef __HAVE_ARCH_MEMSET
extern void *memset(void *__s, int __c, size_t __count); extern void *memset(void *__s, int __c, __kernel_size_t __count);
#undef __HAVE_ARCH_MEMCPY #undef __HAVE_ARCH_MEMCPY
extern void *memcpy(void *__to, __const__ void *__from, size_t __n); extern void *memcpy(void *__to, __const__ void *__from, __kernel_size_t __n);
#undef __HAVE_ARCH_MEMMOVE #undef __HAVE_ARCH_MEMMOVE
extern void *memmove(void *__dest, __const__ void *__src, size_t __n); extern void *memmove(void *__dest, __const__ void *__src, __kernel_size_t __n);
#endif /* _ASM_STRING_H */ #endif /* _ASM_STRING_H */

49
include/configs/MPC8266ADS.h
View File

@ -146,37 +146,26 @@
/* /*
* Command line configuration. * Command line configuration.
*/ */
#include <config_cmd_all.h> #include <config_cmd_default.h>
#undef CONFIG_CMD_BEDBUG /* Commands we want, that are not part of default set */
#undef CONFIG_CMD_BMP #define CONFIG_CMD_ASKENV /* ask for env variable */
#undef CONFIG_CMD_BSP #define CONFIG_CMD_CACHE /* icache, dcache */
#undef CONFIG_CMD_DATE #define CONFIG_CMD_DHCP /* DHCP Support */
#undef CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG /* Diagnostics */
#undef CONFIG_CMD_DISPLAY #define CONFIG_CMD_IMMAP /* IMMR dump support */
#undef CONFIG_CMD_DOC #define CONFIG_CMD_IRQ /* irqinfo */
#undef CONFIG_CMD_DTT #define CONFIG_CMD_MII /* MII support */
#undef CONFIG_CMD_EEPROM #define CONFIG_CMD_PCI /* pciinfo */
#undef CONFIG_CMD_ELF #define CONFIG_CMD_PING /* ping support */
#undef CONFIG_CMD_EXT2 #define CONFIG_CMD_PORTIO /* Port I/O */
#undef CONFIG_CMD_FDC #define CONFIG_CMD_REGINFO /* Register dump */
#undef CONFIG_CMD_FDOS #define CONFIG_CMD_SAVES /* save S record dump */
#undef CONFIG_CMD_HWFLOW #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_JFFS2 /* Commands from default set we don't need */
#undef CONFIG_CMD_KGDB #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCMCIA
#undef CONFIG_CMD_REISER
#undef CONFIG_CMD_SCSI
#undef CONFIG_CMD_SPI
#undef CONFIG_CMD_SNTP
#undef CONFIG_CMD_VFD
#undef CONFIG_CMD_UNIVERSE
#undef CONFIG_CMD_USB
#undef CONFIG_CMD_XIMG
/* Define a command string that is automatically executed when no character /* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset. * is read on the console interface withing "Boot Delay" after reset.

6
include/configs/TQM5200.h
View File

@ -257,8 +257,8 @@
"fdt_addr=FC0A0000\0" \ "fdt_addr=FC0A0000\0" \
"kernel_addr=FC0C0000\0" \ "kernel_addr=FC0C0000\0" \
"ramdisk_addr=FC300000\0" \ "ramdisk_addr=FC300000\0" \
"kernel_addr_r=200000\0" \ "kernel_addr_r=400000\0" \
"fdt_addr_r=400000\0" \ "fdt_addr_r=600000\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsargs=setenv bootargs root=/dev/nfs rw " \
@ -547,7 +547,7 @@
# if defined (CONFIG_TQM5200_REV100) # if defined (CONFIG_TQM5200_REV100)
# error TQM5200 REV100 not supported on STK52XX REV200 or above # error TQM5200 REV100 not supported on STK52XX REV200 or above
# else/* TQM5200 REV200 and above */ # else/* TQM5200 REV200 and above */
# define CFG_GPS_PORT_CONFIG 0x91500004 # define CFG_GPS_PORT_CONFIG 0x91500404
# endif # endif
# endif # endif
#elif defined (CONFIG_FO300) #elif defined (CONFIG_FO300)

13
include/configs/TQM860M.h
View File

@ -69,9 +69,14 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM860M/uImage\0" \ "bootfile=/tftpboot/TQM860M/uImage\0" \
"fdt_addr=40080000\0" \ "fdt_addr=400C0000\0" \
"kernel_addr=400A0000\0" \ "kernel_addr=40100000\0" \
"ramdisk_addr=40280000\0" \ "ramdisk_addr=40280000\0" \
"load=tftp 200000 ${u-boot}\0" \
"update=protect off 40000000 +${filesize};" \
"erase 40000000 +${filesize};" \
"cp.b 200000 40000000 ${filesize};" \
"protect on 40000000 +${filesize}\0" \
"" ""
#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_BOOTCOMMAND "run flash_self"
@ -172,7 +177,7 @@
#define CFG_FLASH_BASE 0x40000000 #define CFG_FLASH_BASE 0x40000000
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
/* /*
* For booting Linux, the board info and command line data * For booting Linux, the board info and command line data
@ -193,7 +198,7 @@
#define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ #define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */ /* Address and size of Redundant Environment Sector */
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)

49
include/configs/TQM866M.h
View File

@ -81,9 +81,14 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM866M/uImage\0" \ "bootfile=/tftpboot/TQM866M/uImage\0" \
"fdt_addr=40080000\0" \ "fdt_addr=400C0000\0" \
"kernel_addr=400A0000\0" \ "kernel_addr=40100000\0" \
"ramdisk_addr=40280000\0" \ "ramdisk_addr=40280000\0" \
"load=tftp 200000 ${u-boot}\0" \
"update=protect off 40000000 +${filesize};" \
"erase 40000000 +${filesize};" \
"cp.b 200000 40000000 ${filesize};" \
"protect on 40000000 +${filesize}\0" \
"" ""
#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_BOOTCOMMAND "run flash_self"
@ -215,7 +220,7 @@
#define CFG_FLASH_BASE 0x40000000 #define CFG_FLASH_BASE 0x40000000
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
/* /*
* For booting Linux, the board info and command line data * For booting Linux, the board info and command line data
@ -236,7 +241,7 @@
#define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ #define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */ /* Address and size of Redundant Environment Sector */
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
@ -421,26 +426,30 @@
#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) #define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
/* /*
* Memory Periodic Timer Prescaler * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
* Periodic timer for refresh, start with refresh rate for 40 MHz clock *
* (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK) * CPUclock(MHz) * 31.2
* CFG_MAMR_PTA = ----------------------------------- with DFBRG = 0
* 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
*
* CPU clock = 15 MHz: CFG_MAMR_PTA = 29 -> 4 * 7.73 us
* CPU clock = 50 MHz: CFG_MAMR_PTA = 97 -> 4 * 7.76 us
* CPU clock = 66 MHz: CFG_MAMR_PTA = 128 -> 4 * 7.75 us
* CPU clock = 133 MHz: CFG_MAMR_PTA = 255 -> 4 * 7.67 us
*
* Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
* be met also in the default configuration, i.e. if environment variable
* 'cpuclk' is not set.
*/ */
#define CFG_MAMR_PTA 39 #define CFG_MAMR_PTA 97
/* /*
* For 16 MBit, refresh rates could be 31.3 us * Memory Periodic Timer Prescaler Register (MPTPR) values.
* (= 64 ms / 2K = 125 / quad bursts).
* For a simpler initialization, 15.6 us is used instead.
*
* #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
* #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
*/ */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ /* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ #define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16
/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ #define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8
#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
/* /*
* MAMR settings for SDRAM * MAMR settings for SDRAM

2
include/configs/delta.h
View File

@ -123,6 +123,8 @@
#define CONFIG_USB_STORAGE 1 #define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1 #define CONFIG_DOS_PARTITION 1
#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */
#undef CFG_USB_OHCI_BOARD_INIT #undef CFG_USB_OHCI_BOARD_INIT
#define CFG_USB_OHCI_CPU_INIT 1 #define CFG_USB_OHCI_CPU_INIT 1
#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE #define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE

1
include/configs/lubbock.h
View File

@ -42,6 +42,7 @@
#endif #endif
#define CONFIG_MMC 1 #define CONFIG_MMC 1
#define BOARD_LATE_INIT 1 #define BOARD_LATE_INIT 1
#define CONFIG_DOS_PARTITION
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

29
include/configs/motionpro.h
View File

@ -163,9 +163,9 @@
/* /*
* Clock configuration: SYS_XTALIN = 25MHz * Clock configuration: SYS_XTALIN = 33MHz
*/ */
#define CFG_MPC5XXX_CLKIN 25000000 #define CFG_MPC5XXX_CLKIN 33000000
/* /*
@ -211,7 +211,7 @@
#endif #endif
#define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */ #define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */ #define CFG_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ #define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
@ -221,7 +221,7 @@
/* Boot Chipselect */ /* Boot Chipselect */
#define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#define CFG_BOOTCS_CFG 0x03035D00 #define CFG_BOOTCS_CFG 0x00045D00
/* Flash memory addressing */ /* Flash memory addressing */
#define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_START CFG_FLASH_BASE
@ -251,11 +251,11 @@
/* /*
* SDRAM configuration * SDRAM configuration
*/ */
/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */ /* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
#define SDRAM_CONFIG1 0x52222600 #define SDRAM_CONFIG1 0x62322900
#define SDRAM_CONFIG2 0x88b70000 #define SDRAM_CONFIG2 0x88c70000
#define SDRAM_CONTROL 0x50570000 #define SDRAM_CONTROL 0x504f0000
#define SDRAM_MODE 0x008d0000 #define SDRAM_MODE 0x00cd0000
/* /*
@ -267,7 +267,7 @@
#define CFG_FLASH_SIZE 0x01000000 #define CFG_FLASH_SIZE 0x01000000
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ #define CONFIG_FLASH_16BIT /* Flash is 16-bit */
/* /*
@ -277,8 +277,8 @@
#define MTDIDS_DEFAULT "nor0=motionpro-0" #define MTDIDS_DEFAULT "nor0=motionpro-0"
#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ #define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
"13m(fs),2m(kernel),256k(uboot)," \ "13m(fs),2m(kernel),256k(uboot)," \
"64k(env),64k(redund_env),64k(dtb)," \ "128k(env),128k(redund_env)," \
"-(user_data)" "128k(dtb),-(user_data)"
/* /*
* IDE/ATA configuration * IDE/ATA configuration
@ -356,7 +356,7 @@ extern void __led_set(led_id_t id, int state);
/* This has to be a multiple of the Flash sector size */ /* This has to be a multiple of the Flash sector size */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x1000 #define CFG_ENV_SIZE 0x1000
#define CFG_ENV_SECT_SIZE 0x10000 #define CFG_ENV_SECT_SIZE 0x20000
/* Configuration of redundant environment */ /* Configuration of redundant environment */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
@ -394,7 +394,8 @@ extern void __led_set(led_id_t id, int state);
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */ #define CFG_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */
#define CFG_ALT_MEMTEST
#define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */ #define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */

13
include/configs/pxa255_idp.h
View File

@ -38,10 +38,11 @@
#include <asm/arch/pxa-regs.h> #include <asm/arch/pxa-regs.h>
/* /*
* If we are developing, we might want to start armboot from ram * If we are developing, we might want to start U-Boot from RAM
* so we MUST NOT initialize critical regs like mem-timing ... * so we MUST NOT initialize critical regs like mem-timing ...
*/ */
#define CONFIG_INIT_CRITICAL /* undef for developing */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */
/* /*
* define the following to enable debug blinks. A debug blink function * define the following to enable debug blinks. A debug blink function
@ -62,6 +63,7 @@
#endif #endif
#define CONFIG_MMC 1 #define CONFIG_MMC 1
#define CONFIG_DOS_PARTITION 1
#define BOARD_LATE_INIT 1 #define BOARD_LATE_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@ -121,7 +123,6 @@
#define CONFIG_CMD_FAT #define CONFIG_CMD_FAT
#define CONFIG_CMD_DHCP #define CONFIG_CMD_DHCP
#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "bootm 40000" #define CONFIG_BOOTCOMMAND "bootm 40000"
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
@ -332,7 +333,7 @@
#define CFG_FLASH_CFI_DRIVER 1 #define CFG_FLASH_CFI_DRIVER 1
#define CFG_MONITOR_BASE 0 #define CFG_MONITOR_BASE 0
#define CFG_MONITOR_LEN 0x40000 #define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
@ -347,7 +348,7 @@
#define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_IS_IN_FLASH 1
/* Addr of Environment Sector */ /* Addr of Environment Sector */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) #define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ #define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x40000 #define CFG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */

1
include/configs/xsengine.h
View File

@ -32,6 +32,7 @@
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_XSENGINE 1 #define CONFIG_XSENGINE 1
#define CONFIG_MMC 1 #define CONFIG_MMC 1
#define CONFIG_DOS_PARTITION 1
#define BOARD_POST_INIT 1 #define BOARD_POST_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */

6
include/part.h
View File

@ -38,9 +38,9 @@ typedef struct block_dev_desc {
#endif #endif
lbaint_t lba; /* number of blocks */ lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */ unsigned long blksz; /* block size */
unsigned char vendor [40+1]; /* IDE model, SCSI Vendor */ char vendor [40+1]; /* IDE model, SCSI Vendor */
unsigned char product[20+1]; /* IDE Serial no, SCSI product */ char product[20+1]; /* IDE Serial no, SCSI product */
unsigned char revision[8+1]; /* firmware revision */ char revision[8+1]; /* firmware revision */
unsigned long (*block_read)(int dev, unsigned long (*block_read)(int dev,
unsigned long start, unsigned long start,
lbaint_t blkcnt, lbaint_t blkcnt,