u-boot: update version /home/liliana/Dingussy/local/releases/tt1467818

2025-02-15 17:21:59 +01:00 · 2025-02-15 17:21:59 +01:00 · 1a00cc7d94
commit 1a00cc7d94
parent cd82919e6c
3144 changed files with 411566 additions and 103944 deletions
--- a/39697
+++ b/39697
--- a/99
+++ b/99
@ -117,7 +117,7 @@ N: Arun Dharankar
 E: ADharankar@ATTBI.Com
 D: threads / scheduler example code
-N: K?ri Dav??sson
+N: Kári Davíðsson
 E: kd@flaga.is
 D: FLAGA DM Support
@ -143,15 +143,10 @@ E: info@elste.org
 D: Port for the ModNET50 Board, NET+50 CPU Port
 W: http://www.imms.de
-N: Daniel Engstr?m
+N: Daniel Engström
 E: daniel@omicron.se
 D: x86 port, Support for sc520_cdp board
 N: Hayden Fraser
 E: Hayden.Fraser@freescale.com
 D: Support for ColdFire MCF5253
 W: www.freescale.com
 N: Dr. Wolfgang Grandegger
 E: wg@denx.de
 D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards
@ -165,15 +160,6 @@ N: Thomas Frieden
 E: ThomasF@hyperion-entertainment.com
 D: Support for AmigaOne
 N: Niklaus Giger
 E: niklaus.giger@netstal.com
 D: Support for HCU(x) boards
 W: www.netstal.com
 N: Paul Gortmaker
 E: paul.gortmaker@windriver.com
 D: Support for WRS SBC8347/8349 boards
 N: Frank Gottschling
 E: fgottschling@eltec.de
 D: Support for ELTEC MHPC/BAB7xx/ELPPC boards, cfb-console, i8042, SMI LynxEM
@ -236,10 +222,6 @@ E: mark.jonas@freescale.com
 D: Support for Freescale Total5200 platform
 W: http://www.mobilegt.com/
 N: Mark Jonas
 E: mark.jonas@de.bosch.com
 D: Support for MPR2 board
 N: Sam Song
 E: samsongshu@yahoo.com.cn
 D: Port to the RPXlite_DW board
@ -266,10 +248,6 @@ E: Raghu.Krishnaprasad@fci.com
 D: Support for Adder-II MPC852T evaluation board
 W: http://www.forcecomputers.com
 N: Sergey Kubushyn
 E: ksi@koi8.net
 D: Support for various TI DaVinci based boards.
 N: Bernhard Kuhn
 E: bkuhn@metrowerks.com
 D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards
@ -292,11 +270,6 @@ E: team@leox.org
 D: Support for LEOX boards, DS164x RTC
 W: http://www.leox.org
 N: TsiChung Liew
 E: Tsi-Chung.Liew@freescale.com
 D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
 W: www.freescale.com
 N: Leif Lindholm
 E: leif.lindholm@i3micro.com
 D: Support for AMD dbau1550 board.
@ -307,20 +280,10 @@ D: Support for Nios Stratix Development Kit (DK-1S10)
 D: Support for SSV ADNP/ESC1 (Nios Cyclone)
 W: http://www.li-pro.net
 N: Dave Liu
 E: daveliu@freescale.com
 D: Support for MPC8315, MPC832x, MPC8360, MPC837x
 W: www.freescale.com
 N: Raymond Lo
 E: lo@routefree.com
 D: Support for DOS partitions
 N: James MacAulay
 E: james.macaulay@amirix.com
 D: Suppport for Amirix AP1000
 W: www.amirix.com
 N: Dan Malek
 E: dan@embeddedalley.com
 D: FADSROM, the grandfather of all of this
@ -343,7 +306,7 @@ N: Frank Morauf
 E: frank.morauf@salzbrenner.com
 D: Support for Embedded Planet RPX Super Board
-N: David M?ller
+N: David Müller
 E: d.mueller@elsoft.ch
 D: Support for Samsung ARM920T SMDK2410 eval board
@ -395,14 +358,9 @@ E: dan.poirot@windriver.com
 D: Support for the Wind River sbc405, sbc8240 board
 W: http://www.windriver.com
 N: Stelian Pop
 E: stelian.pop@leadtechdesign.com
 D: Atmel AT91CAP9ADK support
 N: Stefan Roese
-E: sr@denx.de
+E: stefan.roese@esd-electronics.com
-D: AMCC PPC4xx Support
+D: AMCC PPC401/403/405GP Support; Windows environment support
 W: http://www.denx.de
 N: Erwin Rol
 E: erwin@muffin.org
@ -424,27 +382,13 @@ N: Paolo Scaffardi
 E: arsenio@tin.it
 D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
 N: Andre Schwarz
 E: andre.schwarz@matrix-vision.de
 D: Support for Matrix Vision boards (MVBLM7/MVBC_P)
 N: Robert Schwebel
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
 N: Aaron Sells
 E: sellsa@embeddedplanet.com
 D: Support for EP82xxM
 N: Art Shipkowski
 E: art@videon-central.com
 D: Support for NetSilicon NS7520
 D: Support for ColdFire MCF5275
 N: Michal Simek
 E: monstr@monstr.eu
 D: Support for Microblaze, ML401, XUPV2P board
 W: www.monstr.eu
 N: Yasushi Shoji
 E: yashi@atmark-techno.com
@ -459,11 +403,6 @@ E: andrea.scian@dave-tech.it
 D: Port to B2 board
 W: www.dave-tech.it
 N: Timur Tabi
 E: timur@freescale.com
 D: Support for MPC8349E-mITX
 W: www.freescale.com
 N: Rob Taylor
 E: robt@flyingpig.com
 D: Port to MBX860T and Sandpoint8240
@ -518,27 +457,7 @@ E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
-N: Nobuhiro Iwamatsu
+N: James MacAulay
-E: iwamatsu@nigauri.org
+E: james.macaulay@amirix.com
-D: Support for SuperH, MS7750SE01 and  MS7722SE01 boards.
+D: Suppport for Amirix AP1000
-W: http://www.nigauri.org/~iwamatsu/
+W: www.amirix.com
 N: Alan Lu
 E: alnalu001@gmail.com
 D: Support for Artila M-501 starter kit
 W: http://www.artila.com/
 N: Kimmo Leppala
 E: kimmo.leppala@sysart.fi
 D: Support for Artila M-501 starter kit
 W: http://www.sysart.fi/
 N: Timo Tuunainen
 E: timo.tuunainen@sysart.fi
 D: Support for Artila M-501 starter kit
 W: http://www.sysart.fi/
 N: Philip Balister
 E: philip@opensdr.com
 D: Port to Lyrtech SFFSDR development board.
 W: www.opensdr.com
--- a/252
+++ b/252
@ -28,7 +28,6 @@ Pantelis Antoniou <panto@intracom.gr>
 Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 	cpci5200		MPC5200
 	mecp5200	MPC5200
 	pf5200			MPC5200
 	CPCI750			PPC750FX/GX
@ -42,10 +41,6 @@ Yuli Barcohen <yuli@arabellasw.com>
 	Rattler			MPC8248
 	ZPC1900			MPC8265
 Michael Barkowski <michael.barkowski@freescale.com>
 	MPC8323ERDB	MPC8323
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 	sacsng			MPC8260
@ -58,10 +53,6 @@ Conn Clark <clark@esteem.com>
 	ESTEEM192E		MPC8xx
 Joe D'Abbraccio <ljd015@freescale.com>
 	MPC837xERDB	MPC837x
 Kári Davíðsson <kd@flaga.is>
 	FLAGADM			MPC823
@ -150,11 +141,11 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	CPCI4052		PPC405GP
 	CPCI405AB		PPC405GP
 	CPCI405DT		PPC405GP
 	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
 	DP405			PPC405EP
 	DU405			PPC405GP
 	DU440		PPC440EPx
 	G2000			PPC405EP
 	HH405			PPC405EP
 	HUB405			PPC405EP
@ -163,18 +154,11 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	PCI405			PPC405GP
 	PLU405			PPC405EP
 	PMC405			PPC405GP
 	PMC440		PPC440EPx
 	VOH405			PPC405EP
 	VOM405			PPC405EP
 	WUH405			PPC405EP
 	CMS700                  PPC405EP
 Niklaus Giger <niklaus.giger@netstal.com>
 	HCU4		PPC405GPr
 	MCU25		PPC405GPr
 	HCU5		PPC440EPx
 Frank Gottschling <fgottschling@eltec.de>
 	MHPC			MPC8xx
@ -186,6 +170,7 @@ Wolfgang Grandegger <wg@denx.de>
 	CCM			MPC855
 	PN62			MPC8240
 	IPHASE4539		MPC8260
 	SCM			MPC8260
@ -193,20 +178,11 @@ Howard Gray <mvsensor@matrix-vision.de>
 	MVS1			MPC823
 Joe Hamman <joe.hamman@embeddedspecialties.com>
 	sbc8548		MPC8548
 	sbc8641d	MPC8641D
 Klaus Heydeck <heydeck@kieback-peter.de>
 	KUP4K			MPC855
 	KUP4X			MPC859
 Gary Jennejohn <garyj@denx.de>
 	quad100hd	PPC405EP
 Murray Jensen <Murray.Jensen@csiro.au>
 	cogent_mpc8xx		MPC8xx
@ -214,10 +190,6 @@ Murray Jensen <Murray.Jensen@csiro.au>
 	cogent_mpc8260		MPC8260
 	hymod			MPC8260
 Larry Johnson <lrj@acm.org>
 	korat		PPC440EPx
 Brad Kemp <Brad.Kemp@seranoa.com>
 	ppmc8260		MPC8260
@ -231,25 +203,10 @@ Thomas Lange <thomas@corelatus.se>
 	GTH			MPC860
 Robert Lazarski <robertlazarski@gmail.com>
 	ATUM8548	MPC8548
 The LEOX team <team@leox.org>
 	ELPT860			MPC860T
 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 	linkstation	MPC8241
 Dave Liu <daveliu@freescale.com>
 	MPC8315ERDB	MPC8315
 	MPC832XEMDS	MPC832x
 	MPC8360EMDS	MPC8360
 	MPC837XEMDS	MPC837x
 Nye Liu <nyet@zumanetworks.com>
 	ZUMA			MPC7xx_74xx
@ -261,13 +218,10 @@ Jon Loeliger <jdl@freescale.com>
 	MPC8541CDS		MPC8541
 	MPC8555CDS		MPC8555
-	MPC8641HPCN	MPC8641D
+Dan Malek <dan@embeddededge.com>
-Dan Malek <dan@embeddedalley.com>
+	STxGP3			MPC85xx
-
+	STxXTc			MPC8xx
 	stxgp3		MPC85xx
 	stxssa		MPC85xx
 	stxxtc		MPC8xx
 Eran Man <eran@nbase.co.il>
@ -290,7 +244,6 @@ Tolunay Orkun <torkun@nextio.com>
 John Otken <jotken@softadvances.com>
 	luan			PPC440SP
 	taihu		PPC405EP
 Keith Outwater <Keith_Outwater@mvis.com>
@ -301,15 +254,20 @@ Frank Panno <fpanno@delphintech.com>
 	ep8260			MPC8260
 Peter Pearse <peter.pearse@arm.com>
 	integratorcp		All current ARM supplied &
 				supported core modules
 				- see http://www.arm.com
 				/products/DevTools
 				/Hardware_Platforms.html
 	versatile		ARM926EJ-S
 	versatile		ARM926EJ-S
 Denis Peter <d.peter@mpl.ch>
 	MIP405			PPC4xx
 	PIP405			PPC4xx
 Kim Phillips <kim.phillips@freescale.com>
 	MPC8349EMDS	MPC8349
 Daniel Poirot <dan.poirot@windriver.com>
 	sbc8240			MPC8240
@ -317,37 +275,20 @@ Daniel Poirot <dan.poirot@windriver.com>
 Stefan Roese <sr@denx.de>
 	P3M7448		MPC7448
 	uc100			MPC857
 	TQM85xx			MPC8540/8541/8555/8560
 	acadia		PPC405EZ
 	alpr		PPC440GX
 	bamboo			PPC440EP
 	bunbinga		PPC405EP
 	canyonlands	PPC460EX
 	ebony			PPC440GP
 	glacier		PPC460GT
 	haleakala	PPC405EXr
 	katmai		PPC440SPe
 	kilauea		PPC405EX
 	lwmon5		PPC440EPx
 	makalu		PPC405EX
 	ocotea			PPC440GX
 	p3p440			PPC440GP
 	pcs440ep		PPC440EP
 	rainier		PPC440GRx
 	sequoia		PPC440EPx
 	sycamore		PPC405GPr
 	taishan		PPC440GX
 	walnut			PPC405GP
 	yellowstone		PPC440GR
 	yosemite		PPC440EP
 	zeus		PPC405EP
 	P3M750		PPC750FX/GX/GL
 Yusdi Santoso <yusdi_santoso@adaptec.com>
@ -359,31 +300,10 @@ Travis Sawyer (travis.sawyer@sandburst.com>
 	METROBOX		PPC440GX
 	XPEDITE1K		PPC440GX
 Heiko Schocher <hs@denx.de>
 	ids8247		MPC8247
 	jupiter		MPC5200
 	mgcoge		MPC8247
 	mgsuvd		MPC852
 	municse		MPC5200
 	sc3		PPC405GP
 	uc101		MPC5200
 Peter De Schrijver <p2@mind.be>
 	ML2			PPC4xx
 Andre Schwarz <andre.schwarz@matrix-vision.de>
 	mvbc_p		MPC5200
 	mvblm7		MPC8343
 Timur Tabi <timur@freescale.com>
 	MPC8349E-mITX	MPC8349
 	MPC8349E-mITX-GP MPC8349
 Erik Theisen <etheisen@mindspring.com>
 	W7OLMC			PPC4xx
@ -398,15 +318,6 @@ Rune Torgersen <runet@innovsys.com>
 	MPC8266ADS		MPC8266
 David Updegraff <dave@cray.com>
 	CRAYL1		PPC4xx
 Anton Vorontsov <avorontsov@ru.mvista.com>
 	MPC8360ERDK	MPC8360
 Josef Wagner <Wagner@Microsys.de>
 	CPC45			MPC8245
@ -416,10 +327,6 @@ Stephen Williams <steve@icarus.com>
 	JSE			PPC405GPr
 Roy Zang <tie-fei.zang@freescale.com>
 	mpc7448hpc2	MPC7448
 John Zhan <zhanz@sinovee.com>
 	svm_sc8xx		MPC8xx
@ -440,6 +347,7 @@ Unknown / orphaned boards:
 	RPXClassic		MPC8xx
 	RPXlite			MPC8xx
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
 	MOUSSE			MPC824x
@ -496,24 +404,21 @@ Kshitij Gupta <kshitij@ti.com>
 	omap1510inn		ARM925T
 	omap1610inn		ARM926EJS
 Kyle Harris <kharris@nexus-tech.net>
 	lubbock			xscale
 	cradle			xscale
 	ixdp425			xscale
 Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 Konstantin Kletschke <kletschke@synertronixx.de>
 	scb9328		ARM920T
 Nishant Kamat <nskamat@ti.com>
 	omap1610h2		ARM926EJS
 Sergey Kubushyn <ksi@koi8.net>
 	DV-EVM		ARM926EJS
 	SONATA		ARM926EJS
 	SCHMOOGIE	ARM926EJS
 Prakash Kumar <prakash@embedx.com>
 	cerf250			xscale
@ -527,46 +432,20 @@ Rolf Offermanns <rof@sysgo.de>
 	shannon			SA1100
 Kyungmin Park <kyungmin.park@samsung.com>
 	apollon		ARM1136EJS
 Peter Pearse <peter.pearse@arm.com>
 	integratorcp	All current ARM supplied & supported core modules
 			-see http://www.arm.com/products/DevTools/Hardware_Platforms.html
 	versatile	ARM926EJ-S
 	versatile	ARM926EJ-S
 Dave Peverley <dpeverley@mpc-data.co.uk>
 	omap730p2		ARM926EJS
 Stelian Pop <stelian.pop@leadtechdesign.com>
 	at91cap9adk	ARM926EJS (AT91CAP9 SoC)
 	at91sam9260ek	ARM926EJS (AT91SAM9260 SoC)
 	at91sam9261ek	ARM926EJS (AT91SAM9261 SoC)
 	at91sam9263ek	ARM926EJS (AT91SAM9263 SoC)
 	at91sam9rlek	ARM926EJS (AT91SAM9RL SoC)
 Stefan Roese <sr@denx.de>
 	ixdpg425		xscale
 	pdnb3			xscale
 	scpu		xscale
 Robert Schwebel <r.schwebel@pengutronix.de>
 	csb226			xscale
 	innokom			xscale
 Michael Schwingen <michael@schwingen.org>
 	actux1		xscale
 	actux2		xscale
 	actux3		xscale
 	actux4		xscale
 Andrea Scian <andrea.scian@dave-tech.it>
 	B2			ARM7TDMI (S3C44B0X)
@ -586,15 +465,6 @@ Alex Z
 	lart			SA1100
 	dnp1110			SA1110
 -------------------------------------------------------------------------
 Unknown / orphaned boards:
 	Board		CPU	Last known maintainer / Comment
 .........................................................................
 	cradle		xscale	Kyle Harris <kharris@nexus-tech.net> / dead address
 	ixdp425		xscale	Kyle Harris <kharris@nexus-tech.net> / dead address
 	lubbock		xscale	Kyle Harris <kharris@nexus-tech.net> / dead address
 #########################################################################
 # x86 Systems:								#
 #									#
@ -622,9 +492,6 @@ Thomas Lange <thomas@corelatus.se>
 	dbau1x00		MIPS32 Au1000
 	gth2			MIPS32 Au1000
 Vlad Lungu <vlad.lungu@windriver.com>
 	qemu_mips	MIPS32
 #########################################################################
 # Nios-32 Systems:							#
 #									#
@ -667,11 +534,6 @@ Yasushi Shoji <yashi@atmark-techno.com>
 	SUZAKU			MicroBlaze
 Michal Simek <monstr@monstr.eu>
 	ML401		MicroBlaze
 	XUPV2P		MicroBlaze
 #########################################################################
 # Coldfire Systems:							#
 #									#
@ -683,77 +545,9 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	TASREG			MCF5249
-Hayden Fraser <Hayden.Fraser@freescale.com>
+Zachary P. Landau <zachary.landau@labxtechnologies.com>
-	M5253EVBE	mcf52x2
+	r5200			mcf52x2
 TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 	M52277EVB	mcf5227x
 	M5235EVB	mcf52x2
 	M5329EVB	mcf532x
 	M5373EVB	mcf532x
 	M54455EVB	mcf5445x
 	M5475EVB	mcf547x_8x
 	M5485EVB	mcf547x_8x
 #########################################################################
 # AVR32 Systems:							#
 #									#
 # Maintainer Name, Email Address					#
 #	Board		CPU						#
 #########################################################################
 Haavard Skinnemoen <hskinnemoen@atmel.com>
 	ATSTK1000	AT32AP7xxx
 	ATSTK1002	AT32AP7000
 	ATSTK1003	AT32AP7001
 	ATSTK1004	AT32AP7002
 	ATSTK1006	AT32AP7000
 	ATNGW100	AT32AP7000
 #########################################################################
 # SuperH Systems:							#
 #									#
 # Maintainer Name, Email Address					#
 #	Board		CPU						#
 #########################################################################
 Yusuke Goda <goda.yusuke@renesas.com>
 	MIGO-R		SH7722
 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 	MS7750SE	SH7750
 	MS7722SE	SH7722
 	R7780MP		SH7780
 	R2DPlus		SH7751R
 	SH7763RDP	SH7763
 Mark Jonas <mark.jonas@de.bosch.com>
 	mpr2		SH7720
 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
 	MS7720SE	SH7720
 #########################################################################
 # Blackfin Systems:							#
 #									#
 # Maintainer Name, Email Address					#
 #	Board		CPU						#
 #########################################################################
 Mike Frysinger <vapier@gentoo.org>
 Blackfin Team <u-boot-devel@blackfin.uclinux.org>
 	BF533-EZKIT	BF533
 	BF533-STAMP	BF533
 	BF537-STAMP	BF537
 	BF561-EZKIT	BF561
 #########################################################################
 # End of MAINTAINERS list						#
--- a/688
+++ b/688
@ -8,17 +8,7 @@ else
 	MAKE=make
 fi
-if [ "${MAKEALL_LOGDIR}" ] ; then
+[ -d LOG ] || mkdir LOG || exit 1
 	LOG_DIR=${MAKEALL_LOGDIR}
 else
 	LOG_DIR="LOG"
 fi
 if [ ! "${BUILD_DIR}" ] ; then
 	BUILD_DIR="."
 fi
 [ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1
 LIST=""
@ -35,117 +25,35 @@ LIST_5xx="		\
 #########################################################################
 LIST_5xxx="	\
-	BC3450		\
+	BC3450		cpci5200	EVAL5200	icecube_5100	\
-	cm5200		\
+	icecube_5200	lite5200b	mcc200		o2dnt		\
-	cpci5200	\
+	pf5200		PM520		TB5200		Total5100	\
-	EVAL5200	\
+	Total5200	Total5200_Rev2	TQM5200		TQM5200_B	\
 	fo300		\
 	icecube_5100	\
 	icecube_5200	\
 	inka4x0		\
 	lite5200b	\
 	mcc200		\
 	mecp5200	\
 	motionpro	\
 	munices		\
 	MVBC_P		\
 	o2dnt		\
 	pf5200		\
 	PM520		\
 	TB5200		\
 	Total5100	\
 	Total5200	\
 	Total5200_Rev2	\
 	TQM5200		\
 	TQM5200_B	\
 	TQM5200S							\
 	v38b		\
 "
 #########################################################################
 ## MPC512x Systems
 #########################################################################
 LIST_512x="		\
 	ads5121		\
 "
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
 LIST_8xx="	\
-	Adder87x	\
+	Adder87x	GENIETV		MBX860T		R360MPI		\
-	AdderII		\
+	AdderII		GTH		MHPC		RBC823		\
-	ADS860		\
+	ADS860		hermes		MPC86xADS	rmu		\
-	AMX860		\
+	AMX860		IAD210		MPC885ADS	RPXClassic	\
-	c2mon		\
+	c2mon		ICU862_100MHz	MVS1		RPXlite		\
-	CCM		\
+	CCM		IP860		NETPHONE	RPXlite_DW	\
-	cogent_mpc8xx	\
+	cogent_mpc8xx	IVML24		NETTA		RRvision	\
-	ELPT860		\
+	ELPT860		IVML24_128	NETTA2		SM850		\
-	EP88x		\
+	EP88x		IVML24_256	NETTA_ISDN	spc1920		\
-	ESTEEM192E	\
+	ESTEEM192E	IVMS8		NETVIA		SPD823TS	\
-	ETX094		\
+	ETX094		IVMS8_128	NETVIA_V2	svm_sc8xx	\
-	FADS823		\
+	FADS823		IVMS8_256	NX823		SXNI855T	\
-	FADS850SAR	\
+	FADS850SAR	KUP4K		pcu_e		TOP860		\
-	FADS860T	\
+	FADS860T	KUP4X		QS823		TQM823L		\
-	FLAGADM		\
+	FLAGADM		LANTEC		QS850		TQM823L_LCD	\
-	FPS850L		\
+	FPS850L		lwmon		QS860T		TQM850L		\
-	GEN860T		\
+	GEN860T		MBX		quantum		TQM855L		\
-	GEN860T_SC	\
+	GEN860T_SC					TQM860L		\
 	GENIETV		\
 	GTH		\
 	hermes		\
 	IAD210		\
 	ICU862_100MHz	\
 	IP860		\
 	IVML24		\
 	IVML24_128	\
 	IVML24_256	\
 	IVMS8		\
 	IVMS8_128	\
 	IVMS8_256	\
 	KUP4K		\
 	KUP4X		\
 	LANTEC		\
 	lwmon		\
 	MBX		\
 	MBX860T		\
 	mgsuvd		\
 	MHPC		\
 	MPC86xADS	\
 	MPC885ADS	\
 	MVS1		\
 	NETPHONE	\
 	NETTA		\
 	NETTA2		\
 	NETTA_ISDN	\
 	NETVIA		\
 	NETVIA_V2	\
 	NX823		\
 	pcu_e		\
 	QS823		\
 	QS850		\
 	QS860T		\
 	quantum		\
 	R360MPI		\
 	RBC823		\
 	rmu		\
 	RPXClassic	\
 	RPXlite		\
 	RPXlite_DW	\
 	RRvision	\
 	SM850		\
 	spc1920		\
 	SPD823TS	\
 	svm_sc8xx	\
 	SXNI855T	\
 	TK885D		\
 	TOP860		\
 	TQM823L		\
 	TQM823L_LCD	\
 	TQM850L		\
 	TQM855L		\
 	TQM860L		\
 							TQM885D		\
 							uc100		\
 							v37		\
@ -156,89 +64,20 @@ LIST_8xx="		\
 #########################################################################
 LIST_4xx="	\
-	acadia		\
+	ADCIOP		AP1000		AR405		ASH405		\
-	acadia_nand	\
+	bubinga		CANBT		CMS700		CPCI2DP		\
-	ADCIOP		\
+	CPCI405		CPCI4052	CPCI405AB	CPCI405DT	\
-	alpr		\
+	CPCI440		CPCIISER4	CRAYL1		csb272		\
-	AP1000		\
+	csb472		DASA_SIM	DP405		DU405		\
-	AR405		\
+	ebony		ERIC		EXBITGEN	G2000		\
-	ASH405		\
+	HH405		HUB405		JSE		KAREF		\
-	bamboo		\
+	luan		METROBOX	MIP405		MIP405T		\
-	bamboo_nand	\
+	ML2		ml300		ocotea		OCRTC		\
-	bubinga		\
+	ORSG		p3p440		PCI405		pcs440ep	\
-	CANBT		\
+	PIP405		PLU405		PMC405		PPChameleonEVB	\
-	canyonlands	\
+	sbc405		VOH405		VOM405		W7OLMC		\
-	canyonlands_nand \
+	W7OLMG		walnut		WUH405		XPEDITE1K	\
-	CMS700		\
+	yellowstone	yosemite	yucca		bamboo		\
 	CPCI2DP		\
 	CPCI405		\
 	CPCI4052	\
 	CPCI405AB	\
 	CPCI405DT	\
 	CPCIISER4	\
 	CRAYL1		\
 	csb272		\
 	csb472		\
 	DASA_SIM	\
 	DP405		\
 	DU405		\
 	DU440		\
 	ebony		\
 	ERIC		\
 	EXBITGEN	\
 	G2000		\
 	glacier		\
 	haleakala	\
 	haleakala_nand	\
 	hcu4		\
 	hcu5		\
 	HH405		\
 	HUB405		\
 	JSE		\
 	KAREF		\
 	katmai		\
 	kilauea		\
 	kilauea_nand	\
 	korat		\
 	luan		\
 	lwmon5		\
 	makalu		\
 	mcu25		\
 	METROBOX	\
 	MIP405		\
 	MIP405T		\
 	ML2		\
 	ml300		\
 	ocotea		\
 	OCRTC		\
 	ORSG		\
 	p3p440		\
 	PCI405		\
 	pcs440ep	\
 	PIP405		\
 	PLU405		\
 	PMC405		\
 	PMC440		\
 	PPChameleonEVB	\
 	quad100hd	\
 	rainier		\
 	sbc405		\
 	sc3		\
 	sequoia		\
 	sequoia_nand	\
 	taihu		\
 	taishan		\
 	VOH405		\
 	VOM405		\
 	W7OLMC		\
 	W7OLMG		\
 	walnut		\
 	WUH405		\
 	XPEDITE1K	\
 	yellowstone	\
 	yosemite	\
 	yucca		\
 	zeus		\
 "
 #########################################################################
@ -246,8 +85,7 @@ LIST_4xx="		\
 #########################################################################
 LIST_8220="	\
-	Alaska8220	\
+	Alaska8220	Yukon8220					\
 	Yukon8220	\
 "
 #########################################################################
@ -255,25 +93,11 @@ LIST_8220="		\
 #########################################################################
 LIST_824x="	\
-	A3000		\
+	A3000		barco		BMW		CPC45		\
-	barco		\
+	CU824		debris		eXalion		HIDDEN_DRAGON	\
-	BMW		\
+			MOUSSE		MUSENKI		MVBLUE		\
-	CPC45		\
+	OXC		PN62		Sandpoint8240	Sandpoint8245	\
-	CU824		\
+	sbc8240		SL8245		utx8245				\
 	debris		\
 	eXalion		\
 	HIDDEN_DRAGON	\
 	linkstation_HGLAN	\
 	MOUSSE		\
 	MUSENKI		\
 	MVBLUE		\
 	OXC		\
 	PN62		\
 	Sandpoint8240	\
 	Sandpoint8245	\
 	sbc8240		\
 	SL8245		\
 	utx8245		\
 "
 #########################################################################
@ -281,35 +105,13 @@ LIST_824x="		\
 #########################################################################
 LIST_8260="	\
-	atc		\
+	atc		cogent_mpc8260	CPU86		CPU87		\
-	cogent_mpc8260	\
+	ep8248		ep8260		gw8260		hymod		\
-	CPU86		\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
-	CPU87		\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
-	ep8248		\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
-	ep8260		\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
-	ep82xxm		\
+	TQM8260_AE	ZPC1900						\
 	gw8260		\
 	hymod		\
 	IPHASE4539	\
 	ISPAN		\
 	mgcoge		\
 	MPC8260ADS	\
 	MPC8266ADS	\
 	MPC8272ADS	\
 	PM826		\
 	PM828		\
 	ppmc8260	\
 	Rattler8248	\
 	RPXsuper	\
 	rsdproto	\
 	sacsng		\
 	sbc8260		\
 	SCM		\
 	TQM8260_AC	\
 	TQM8260_AD	\
 	TQM8260_AE	\
 	TQM8272		\
 	ZPC1900		\
 "
 #########################################################################
@ -317,24 +119,7 @@ LIST_8260="		\
 #########################################################################
 LIST_83xx="	\
-	MPC8313ERDB_33	\
+	TQM834x		MPC8349EMDS					\
 	MPC8313ERDB_66	\
 	MPC8315ERDB	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
 	MPC8349EMDS	\
 	MPC8349ITX	\
 	MPC8349ITXGP	\
 	MPC8360EMDS	\
 	MPC8360EMDS_ATM	\
 	MPC8360ERDK_33	\
 	MPC8360ERDK_66	\
 	MPC837XEMDS	\
 	MPC837XERDB	\
 	MVBLM7		\
 	sbc8349		\
 	TQM834x		\
 "
@ -343,38 +128,10 @@ LIST_83xx="		\
 #########################################################################
 LIST_85xx="	\
-	ATUM8548	\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
-	MPC8540ADS	\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
-	MPC8540EVAL	\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
-	MPC8541CDS	\
+	TQM8541		TQM8555		TQM8560				\
 	MPC8544DS	\
 	MPC8548CDS	\
 	MPC8555CDS	\
 	MPC8560ADS	\
 	MPC8568MDS	\
 	PM854		\
 	PM856		\
 	sbc8540		\
 	sbc8548		\
 	sbc8560		\
 	socrates	\
 	stxgp3		\
 	stxssa		\
 	TQM8540		\
 	TQM8541		\
 	TQM8548		\
 	TQM8555		\
 	TQM8560		\
 "
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
 LIST_86xx="		\
 	MPC8610HPCD	\
 	MPC8641HPCN	\
 	sbc8641d	\
 "
 #########################################################################
@ -382,79 +139,36 @@ LIST_86xx="		\
 #########################################################################
 LIST_74xx="	\
-	DB64360		\
+	DB64360		DB64460		EVB64260	P3G4		\
-	DB64460		\
+	PCIPPC2		PCIPPC6		ZUMA				\
 	EVB64260	\
 	mpc7448hpc2	\
 	P3G4		\
 	p3m7448		\
 	PCIPPC2		\
 	PCIPPC6		\
 	ZUMA		\
 "
 LIST_7xx="	\
-	BAB7xx		\
+	BAB7xx		CPCI750		ELPPC		ppmc7xx		\
 	CPCI750		\
 	ELPPC		\
 	p3m750		\
 	ppmc7xx		\
 "
-#########################################################################
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
 ## PowerPC groups
 #########################################################################
 LIST_TSEC="		\
 	${LIST_83xx}	\
 	${LIST_85xx}	\
 	${LIST_86xx}	\
 "
 LIST_ppc="		\
 	${LIST_5xx}	\
 	${LIST_512x}	\
 	${LIST_5xxx}	\
 	  ${LIST_8xx}				\
-	${LIST_8220}	\
+	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
 	${LIST_824x}	\
 	${LIST_8260}	\
 	  ${LIST_83xx}				\
 	  ${LIST_85xx}				\
 	${LIST_86xx}	\
 	  ${LIST_4xx}				\
-	${LIST_74xx}	\
+	  ${LIST_74xx} ${LIST_7xx}"
 	${LIST_7xx}	\
 "
 #########################################################################
 ## StrongARM Systems
 #########################################################################
-LIST_SA="		\
+LIST_SA="assabet dnp1110 gcplus lart shannon"
 	assabet		\
 	dnp1110		\
 	gcplus		\
 	lart		\
 	shannon		\
 "
 #########################################################################
 ## ARM7 Systems
 #########################################################################
 LIST_ARM7="	\
-	ap7		\
+	armadillo	B2		ep7312		evb4510		\
-	ap720t		\
+	impa7		integratorap	ap7		ap720t		\
 	armadillo	\
 	B2		\
 	ep7312		\
 	evb4510		\
 	impa7		\
 	integratorap	\
 	lpc2292sodimm	\
 	modnet50							\
 	SMN42		\
 "
 #########################################################################
@ -462,77 +176,29 @@ LIST_ARM7="		\
 #########################################################################
 LIST_ARM9="	\
-	ap920t			\
+	at91rm9200dk	cmc_pu2						\
-	ap922_XA10		\
+	ap920t		ap922_XA10	ap926ejs	ap946es		\
-	ap926ejs		\
+	ap966		cp920t		cp922_XA10	cp926ejs	\
-	ap946es			\
+	cp946es		cp966		lpd7a400	mp2usb		\
-	ap966			\
+	mx1ads		mx1fs2		netstar		omap1510inn	\
-	cp920t			\
+	omap1610h2	omap1610inn	omap730p2	sbc2410x	\
-	cp922_XA10		\
+	scb9328		smdk2400	smdk2410	trab		\
-	cp926ejs		\
+	VCMA9		versatile	versatileab	versatilepb	\
 	cp946es			\
 	cp966			\
 	lpd7a400		\
 	mx1ads			\
 	mx1fs2			\
 	netstar			\
 	omap1510inn		\
 	omap1610h2		\
 	omap1610inn		\
 	omap5912osk		\
 	omap730p2		\
 	sbc2410x		\
 	scb9328			\
 	smdk2400		\
 	smdk2410		\
 	trab			\
 	VCMA9			\
 	versatile		\
 	versatileab		\
 	versatilepb		\
 	voiceblue							\
 	davinci_dvevm		\
 	davinci_schmoogie	\
 	davinci_sffsdr		\
 	davinci_sonata		\
 "
 #########################################################################
 ## ARM10 Systems
 #########################################################################
 LIST_ARM10="	\
-	integratorcp	\
+	integratorcp	cp1026						\
 	cp1026		\
 "
 #########################################################################
 ## ARM11 Systems
 #########################################################################
 LIST_ARM11="	\
-	cp1136		\
+	cp1136		omap2420h4					\
 	omap2420h4	\
 	apollon		\
 	imx31_litekit	\
 	imx31_phycore	\
 	mx31ads		\
 "
 #########################################################################
 ## AT91 Systems
 #########################################################################
 LIST_at91="		\
 	at91cap9adk	\
 	at91rm9200dk	\
 	at91sam9260ek	\
 	at91sam9261ek	\
 	at91sam9263ek	\
 	at91sam9rlek	\
 	cmc_pu2		\
 	csb637		\
 	kb9202		\
 	mp2usb		\
 	m501sk		\
 "
 #########################################################################
@ -540,74 +206,32 @@ LIST_at91="		\
 #########################################################################
 LIST_pxa="	\
-	cerf250		\
+	adsvix		cerf250		cradle		csb226		\
-	cradle		\
+	delta		innokom		lubbock		pleb2		\
-	csb226		\
+	pxa255_idp	wepep250	xaeniax		xm250		\
-	delta		\
+	xsengine	zylonite					\
 	innokom		\
 	lubbock		\
 	pleb2		\
 	pxa255_idp	\
 	wepep250	\
 	xaeniax		\
 	xm250		\
 	xsengine	\
 	zylonite	\
 "
-LIST_ixp="		\
+LIST_ixp="ixdp425	ixdpg425	pdnb3"
 	actux1		\
 	actux2		\
 	actux3		\
 	actux4		\
 	ixdp425		\
 	ixdpg425	\
 	pdnb3		\
 	scpu		\
 "
 #########################################################################
 ## ARM groups
 #########################################################################
 LIST_arm="	\
 	${LIST_SA}							\
-	${LIST_ARM7}	\
+	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM10} ${LIST_ARM11}		\
-	${LIST_ARM9}	\
+	${LIST_pxa} ${LIST_ixp}						\
 	${LIST_ARM10}	\
 	${LIST_ARM11}	\
 	${LIST_at91}	\
 	${LIST_pxa}	\
 	${LIST_ixp}	\
 "
 #########################################################################
 ## MIPS Systems		(default = big endian)
 #########################################################################
-LIST_mips4kc="		\
+LIST_mips4kc="incaip"
 	incaip		\
 	qemu_mips	\
 "
-LIST_mips5kc="		\
+LIST_mips5kc="purple"
 	purple		\
 "
-LIST_au1xx0="		\
+LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el gth2"
 	dbau1000	\
 	dbau1100	\
 	dbau1500	\
 	dbau1550	\
 	dbau1550_el	\
 	gth2		\
 "
-LIST_mips="		\
+LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
 	${LIST_mips4kc}	\
 	${LIST_mips5kc}	\
 	${LIST_au1xx0}	\
 "
 #########################################################################
 ## MIPS Systems		(little endian)
@ -617,44 +241,27 @@ LIST_mips4kc_el=""
 LIST_mips5kc_el=""
-LIST_au1xx0_el="	\
+LIST_au1xx0_el="dbau1550_el"
 	dbau1550_el	\
 	pb1000		\
 "
-LIST_mips_el="			\
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
 	${LIST_mips4kc_el}	\
 	${LIST_mips5kc_el}	\
 	${LIST_au1xx0_el}	\
 "
 #########################################################################
 ## i386 Systems
 #########################################################################
-LIST_I486="		\
+LIST_I486="sc520_cdp sc520_spunk sc520_spunk_rel"
 	sc520_cdp	\
 	sc520_spunk	\
 	sc520_spunk_rel	\
 "
-LIST_x86="		\
+LIST_x86="${LIST_I486}"
 	${LIST_I486}	\
 "
 #########################################################################
 ## NIOS Systems
 #########################################################################
 LIST_nios="	\
-	ADNPESC1		\
+	ADNPESC1		ADNPESC1_base_32			\
 	ADNPESC1_base_32	\
 	ADNPESC1_DNPEVA2_base_32					\
-	DK1C20			\
+	DK1C20			DK1C20_standard_32			\
-	DK1C20_standard_32	\
+	DK1S10			DK1S10_standard_32 DK1S10_mtx_ldk_20	\
 	DK1S10			\
 	DK1S10_standard_32	\
 	DK1S10_mtx_ldk_20	\
 "
 #########################################################################
@ -662,11 +269,8 @@ LIST_nios="			\
 #########################################################################
 LIST_nios2="	\
-	EP1C20		\
+	EP1C20		EP1S10		EP1S40				\
-	EP1S10		\
+	PCI5441		PK1C20						\
 	EP1S40		\
 	PCI5441		\
 	PK1C20		\
 "
 #########################################################################
@ -674,9 +278,7 @@ LIST_nios2="		\
 #########################################################################
 LIST_microblaze="	\
-	ml401		\
+	suzaku
 	suzaku		\
 	xupv2p		\
 "
 #########################################################################
@ -684,78 +286,11 @@ LIST_microblaze="	\
 #########################################################################
 LIST_coldfire="	\
-	cobra5272		\
+	cobra5272	EB+MCF-EV123	EB+MCF-EV123_internal		\
-	EB+MCF-EV123		\
+	M5271EVB	M5272C3		M5282EVB	TASREG		\
-	EB+MCF-EV123_internal	\
+	r5200		M5271EVB					\
 	idmr			\
 	M52277EVB		\
 	M5235EVB		\
 	M5249EVB		\
 	M5253EVBE		\
 	M5271EVB		\
 	M5272C3			\
 	M5275EVB		\
 	M5282EVB		\
 	M5329AFEE		\
 	M5373EVB		\
 	M54455EVB		\
 	M5475AFE		\
 	M5485AFE		\
 	TASREG			\
 "
 #########################################################################
 ## AVR32 Systems
 #########################################################################
 LIST_avr32="		\
 	atstk1002	\
 	atstk1003	\
 	atstk1004	\
 	atstk1006	\
 	atngw100	\
 "
 #########################################################################
 ## Blackfin Systems
 #########################################################################
 LIST_blackfin="		\
 	bf533-ezkit	\
 	bf533-stamp	\
 	bf537-stamp	\
 	bf561-ezkit	\
 "
 #########################################################################
 ## SH Systems
 #########################################################################
 LIST_sh3="		\
 	mpr2		\
 	ms7720se	\
 "
 LIST_sh4="		\
 	ms7750se	\
 	ms7722se	\
 	MigoR		\
 	r7780mp		\
 	r2dplus		\
 	sh7763rdp	\
 "
 LIST_sh="		\
 	${LIST_sh3}	\
 	${LIST_sh4}	\
 "
 #########################################################################
 ## SPARC Systems
 #########################################################################
 LIST_sparc="gr_xc3s_1500	gr_cpci_ax2000	gr_ep2s60	grsim	grsim_leon2"
 #-----------------------------------------------------------------------
 #----- for now, just run PPC by default -----
@ -768,12 +303,8 @@ build_target() {
 	${MAKE} distclean >/dev/null
 	${MAKE} ${target}_config
-
+	${MAKE} ${JOBS} all 2>&1 >LOG/$target.MAKELOG | tee LOG/$target.ERR
-	${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \
+	${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG
 				| tee ${LOG_DIR}/$target.ERR
 	${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \
 				| tee -a ${LOG_DIR}/$target.MAKELOG
 }
 #-----------------------------------------------------------------------
@ -782,18 +313,13 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	arm|SA|ARM7|ARM9|ARM10|ARM11|at91|ixp|pxa \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
-	|avr32 \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|pxa|ixp| \
-	|blackfin \
+	microblaze| \
-	|coldfire \
+	mips|mips_el| \
-	|microblaze \
+	nios|nios2| \
-	|mips|mips_el \
+	x86|I486| \
-	|nios|nios2 \
+	coldfire)
 	|ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
 	|sh|sh3|sh4 \
 	|sparc \
 	|x86|I486 \
 	)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
--- a/2588
+++ b/2588
--- a/1172
+++ b/1172
--- a/arm_config.mk
+++ b/arm_config.mk
@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
-PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
+PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ -mapcs -mabi=apcs-gnu
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@ -21,19 +21,4 @@
 # MA 02111-1307 USA
 #
-CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU)))
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__blackfin__
 CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))
 PLATFORM_RELFLAGS += -ffixed-P5
 PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
 ifneq (,$(CONFIG_BFIN_CPU))
 PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU)
 endif
 SYM_PREFIX = _
 LDR_FLAGS += --use-vmas
 ifneq (,$(findstring s,$(MAKEFLAGS)))
 LDR_FLAGS += --quiet
 endif
--- a/board/AtmarkTechno/suzaku/Makefile
+++ b/board/AtmarkTechno/suzaku/Makefile
@ -1,5 +1,5 @@
 #
-# (C) Copyright 2003-2006
+# (C) Copyright 2003
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@ -23,22 +23,18 @@
 include $(TOPDIR)/config.mk
-LIB	= $(obj)lib$(BOARD).a
+LIB	= lib$(BOARD).a
-COBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+$(LIB):	.depend $(OBJS)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+	$(AR) crv $@ $(OBJS)
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 #########################################################################
-# defines $(obj).depend target
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-include $(SRCTREE)/rules.mk
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-sinclude $(obj).depend
+sinclude .depend
 #########################################################################
--- a/board/AtmarkTechno/suzaku/suzaku.c
+++ b/board/AtmarkTechno/suzaku/suzaku.c
@ -24,7 +24,7 @@
 /* This is a board specific file.  It's OK to include board specific
 * header files */
-#include <config.h>
+#include <asm/suzaku.h>
 void do_reset(void)
 {
--- a/board/AtmarkTechno/suzaku/u-boot.lds
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@ -61,7 +61,6 @@ SECTIONS
 	{
 		__bss_start = .;
 		*(.bss)
-		__bss_end = .;
+		__bss_start = .;
 	}
 	__end = . ;
 }
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@ -39,7 +39,7 @@ int checkboard (void)
 	return 0;
 }
-phys_size_t initdram (int board_type)
+long int initdram (int board_type)
 {
 	int size,i;
@ -51,9 +51,10 @@ phys_size_t initdram (int board_type)
 		MCFSDRAMC_DACR0 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
 					| MCFSDRAMC_DACR_CASL(1)
 					| MCFSDRAMC_DACR_CBM(3)
-			| MCFSDRAMC_DACR_PS_16;
+					| MCFSDRAMC_DACR_PS_16);
-	MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+		MCFSDRAMC_DMR0 =	MCFSDRAMC_DMR_BAM_16M
 					| MCFSDRAMC_DMR_V;
 		MCFSDRAMC_DACR0 |= 	MCFSDRAMC_DACR_IP;
@ -61,8 +62,8 @@ phys_size_t initdram (int board_type)
 		MCFSDRAMC_DACR0 |=	MCFSDRAMC_DACR_RE;
 		for (i=0; i < 2000; i++)
 			asm(" nop");
-	mbar_writeLong (MCFSDRAMC_DACR0,
+		mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0)
-			mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
+								    | MCFSDRAMC_DACR_IMRS);
 		*(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
 		size += CFG_SDRAM_SIZE * 1024 * 1024;
 	#endif
@ -72,16 +73,15 @@ phys_size_t initdram (int board_type)
 					| MCFSDRAMC_DACR_CBM(3)
 					| MCFSDRAMC_DACR_PS_16;
-	MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+		MCFSDRAMC_DMR1 = 	MCFSDRAMC_DMR_BAM_16M
 					| MCFSDRAMC_DMR_V;
 		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_IP;
 		*(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5;
 		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_RE;
 		for (i=0; i < 2000; i++)
 			asm(" nop");
 		MCFSDRAMC_DACR1 |= 	MCFSDRAMC_DACR_IMRS;
 		*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
 		size += CFG_SDRAM_SIZE1 * 1024 * 1024;
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2003
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@ -23,22 +23,18 @@
 include $(TOPDIR)/config.mk
-LIB	= $(obj)lib$(BOARD).a
+LIB	= lib$(BOARD).a
-COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o
+OBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+$(LIB):	.depend $(OBJS)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+	$(AR) crv $@ $(OBJS)
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 #########################################################################
-# defines $(obj).depend target
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-include $(SRCTREE)/rules.mk
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-sinclude $(obj).depend
+sinclude .depend
 #########################################################################
--- a/board/BuS/EB+MCF-EV123/config.mk
+++ b/board/BuS/EB+MCF-EV123/config.mk
@ -22,7 +22,7 @@
 # MA 02111-1307 USA
 #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/textbase.mk
+sinclude $(TOPDIR)/board/$(BOARDDIR)/textbase.mk
 ifndef TEXT_BASE
 TEXT_BASE = 0xFE000000
 endif
--- a/board/BuS/EB+MCF-EV123/textbase.mk
+++ b/board/BuS/EB+MCF-EV123/textbase.mk
@ -1 +1 @@
-TEXT_BASE = 0xFFE00000
+TEXT_BASE = 0xF0000000
--- a/board/BuS/EB+MCF-EV123/u-boot.lds
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@ -22,6 +22,7 @@
 */
 OUTPUT_ARCH(m68k)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
 /* Do we need any of these for elf?
   __DYNAMIC = 0;    */
 SECTIONS
@ -125,7 +126,7 @@ SECTIONS
  __init_end = .;
  __bss_start = .;
-  .bss (NOLOAD)       :
+  .bss       :
  {
   _sbss = .;
   *(.sbss) *(.scommon)
--- a/board/LEOX/elpt860/Makefile
+++ b/board/LEOX/elpt860/Makefile
@ -4,9 +4,6 @@
 # Copyright (C) 2000, 2001, 2002, 2003
 # The LEOX team <team@leox.org>, http://www.leox.org
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # LEOX.org is about the development of free hardware and software resources
 #   for system on chip.
 #
@ -34,22 +31,18 @@
 include $(TOPDIR)/config.mk
-LIB	= $(obj)lib$(BOARD).a
+LIB	= lib$(BOARD).a
-COBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+$(LIB):	.depend $(OBJS)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+	$(AR) crv $@ $(OBJS)
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 #########################################################################
-# defines $(obj).depend target
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-include $(SRCTREE)/rules.mk
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-sinclude $(obj).depend
+sinclude .depend
 #########################################################################
--- a/board/LEOX/elpt860/elpt860.c
+++ b/board/LEOX/elpt860/elpt860.c
@ -35,7 +35,7 @@
 ** ------
 **              int             board_early_init_f(void)
 **              int             checkboard(void)
-**              phys_size_t     initdram(int board_type)
+**              long int        initdram(int board_type)
 ** called from 'board_init_f()' into 'common/board.c'
 **
 **              void            reset_phy(void)
@ -179,7 +179,7 @@ int checkboard (void)
 /* ------------------------------------------------------------------------- */
-phys_size_t initdram (int board_type)
+long int initdram (int board_type)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@ -31,6 +31,7 @@
 */
 OUTPUT_ARCH(powerpc)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
 /* Do we need any of these for elf?
   __DYNAMIC = 0;    */
 SECTIONS
@ -141,7 +142,7 @@ SECTIONS
  __init_end = .;
  __bss_start = .;
-  .bss (NOLOAD)       :
+  .bss       :
  {
   *(.sbss) *(.scommon)
   *(.dynbss)
--- a/board/LEOX/elpt860/u-boot.lds.debug
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@ -31,6 +31,7 @@
 */
 OUTPUT_ARCH(powerpc)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
 /* Do we need any of these for elf?
   __DYNAMIC = 0;    */
 SECTIONS
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@ -30,49 +30,49 @@
 #include "memio.h"
 #include "via686.h"
-__asm__(" .globl send_kb				\n "
+__asm(" .globl send_kb                                      \n
-	"send_kb:					\n "
+	send_kb:                                            \n
-	"	lis	r9, 0xfe00			\n "
+		lis     r9, 0xfe00                          \n
-	"						\n "
+							    \n
-	"	li	r4, 0x10	# retries	\n "
+		li      r4, 0x10        # retries           \n
-	"	mtctr	r4				\n "
+		mtctr   r4                                  \n
-	"						\n "
+							    \n
-	"idle:						\n "
+	idle:                                               \n
-	"	lbz	r4, 0x64(r9)			\n "
+		lbz     r4, 0x64(r9)                        \n
-	"	andi.	r4, r4, 0x02			\n "
+		andi.   r4, r4, 0x02                        \n
-	"	bne	idle				\n "
+		bne     idle                                \n
-
+							    \n
-	"ready:						\n "
+	ready:                                              \n
-	"	stb	r3, 0x60(r9)			\n "
+		stb     r3, 0x60(r9)                        \n
-	"						\n "
+							    \n
-	"check:						\n "
+	check:                                              \n
-	"	lbz	r4, 0x64(r9)			\n "
+		lbz     r4, 0x64(r9)                        \n
-	"	andi.	r4, r4, 0x01			\n "
+		andi.   r4, r4, 0x01                        \n
-	"	beq	check				\n "
+		beq     check                               \n
-	"						\n "
+							    \n
-	"	lbz	r4, 0x60(r9)			\n "
+		lbz     r4, 0x60(r9)                        \n
-	"	cmpwi	r4, 0xfa			\n "
+		cmpwi   r4, 0xfa                            \n
-	"	beq	done				\n "
+		beq     done                                \n
-
+							    \n
-	"	bdnz	idle				\n "
+		bdnz    idle                                \n
-
+							    \n
-	"	li	r3, 0				\n "
+		li      r3, 0                               \n
-	"	blr					\n "
+		blr                                         \n
-
+							    \n
-	"done:						\n "
+	done:                                               \n
-	"	li	r3, 1				\n "
+		li      r3, 1                               \n
-	"	blr					\n "
+		blr                                         \n
-
+							    \n
-	".globl test_kb					\n "
+	.globl test_kb                                      \n
-	"test_kb:					\n "
+	test_kb:                                            \n
-	"	mflr	r10				\n "
+		mflr    r10                                 \n
-	"	li	r3, 0xed			\n "
+		li      r3, 0xed                            \n
-	"	bl	send_kb				\n "
+		bl      send_kb                             \n
-	"	li	r3, 0x01			\n "
+		li      r3, 0x01                            \n
-	"	bl	send_kb				\n "
+		bl      send_kb                             \n
-	"	mtlr	r10				\n "
+		mtlr    r10                                 \n
-	"	blr					\n "
+		blr                                         \n
-);
+");
 int checkboard (void)
@ -81,7 +81,7 @@ int checkboard (void)
 	return 0;
 }
-phys_size_t initdram (int board_type)
+long initdram (int board_type)
 {
 	return articiaS_ram_init ();
 }
--- a/board/MAI/AmigaOneG3SE/Makefile
+++ b/board/MAI/AmigaOneG3SE/Makefile
@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002-2006
+# (C) Copyright 2002
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@ -22,12 +22,8 @@
 #
 include $(TOPDIR)/config.mk
 ifneq ($(OBJTREE),$(SRCTREE))
 $(shell mkdir -p $(obj)../menu)
 $(shell mkdir -p $(obj)../bios_emulator)
 endif
-LIB	= $(obj)lib$(BOARD).a
+LIB	= lib$(BOARD).a
 COBJS	= $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
 		via686.o i8259.o ../bios_emulator/x86interface.o 	\
@ -35,29 +31,26 @@ COBJS	= $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
 		interrupts.o ps2kbd.o video.o usb_uhci.o enet.o	        \
 		../menu/cmd_menu.o cmd_boota.o nvram.o
-SOBJS	= board_asm_init.o memio.o
+AOBJS	= board_asm_init.o memio.o
 OBJS	= $(COBJS) $(AOBJS)
 EMUDIR  = ../bios_emulator/scitech/src/x86emu/
 EMUOBJ  = $(EMUDIR)decode.o $(EMUDIR)ops2.o $(EMUDIR)fpu.o $(EMUDIR)prim_ops.o \
 		$(EMUDIR)ops.o $(EMUDIR)sys.o
 EMUSRC = $(EMUOBJ:.o=.c)
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+$(LIB):	.depend $(OBJS) $(EMUSRC)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+	make libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 EMUOBJ  := $(addprefix $(obj),$(EMUOBJ))
 $(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(EMUSRC)
 	make $(obj)libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
 	-rm $(LIB)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(EMUOBJ)
+	$(AR) crv $@ $(OBJS) $(EMUOBJ)
 #########################################################################
-# defines $(obj).depend target
+.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
-include $(SRCTREE)/rules.mk
+	$(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-sinclude $(obj).depend
+sinclude .depend
 #########################################################################
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@ -119,7 +119,7 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
-#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_AMIGAONEG3SE) && (CONFIG_COMMANDS & CFG_CMD_BSP)
 U_BOOT_CMD(
 	boota,   3,      1,      do_boota,
 	"boota   - boot an Amiga kernel\n",
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@ -130,7 +130,7 @@
 /* Register window 1 offsets, the window used in normal operation */
 #define TX_FIFO 		0x10
-#define RX_FIFOa		0x10
+#define RX_FIFO 		0x10
 #define RxErrors 		0x14
 #define RxStatus 		0x18
 #define Timer			0x1A
@ -379,12 +379,14 @@ static int auto_negotiate (struct eth_device *dev)
    EL3WINDOW(dev, 1);
    /* Wait for Auto negotiation to complete */
-	for (i = 0; i <= 1000; i++) {
+    for (i = 0; i <= 1000; i++)
    {
 	if (ETH_INW(dev, 2) & 0x04)
 	    break;
 	udelay(100);
-		if (i == 1000) {
+	if (i == 1000)
 	{
 	    PRINTF("Error: Auto negotiation failed\n");
 	    return 0;
 	}
@ -403,17 +405,20 @@ void eth_interrupt (struct eth_device *dev)
    if (!(status & IntLatch))
 	return;
-	if (status & (1 << 6)) {
+    if (status & (1<<6))
    {
 	ETH_CMD(dev, AckIntr | (1<<6));
 	printf("Acknowledged Interrupt command\n");
    }
-	if (status & DownComplete) {
+    if (status & DownComplete)
    {
 	ETH_CMD(dev, AckIntr | DownComplete);
 	printf("Acknowledged DownComplete\n");
    }
-	if (status & UpComplete) {
+    if (status & UpComplete)
    {
 	ETH_CMD(dev, AckIntr | UpComplete);
 	printf("Acknowledged UpComplete\n");
    }
@ -434,18 +439,16 @@ int eth_3com_initialize (bd_t * bis)
 	/* Find ethernet controller on the PCI bus */
-	if ((devno =
+	if ((devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0)) < 0)
-	     pci_find_device (PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C,
+	{
 			      0)) < 0) {
 		PRINTF("Error: Cannot find the ethernet device on the PCI bus\n");
 		goto Done;
 	}
-	if (s) {
+	if (s)
 	{
 	    unsigned long base = atoi(s);
-
+	    pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, base | 0x01);
 		pci_write_config_dword (devno, PCI_BASE_ADDRESS_0,
 					base | 0x01);
 	}
 	ret = pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &eth_iobase);
@ -453,25 +456,26 @@ int eth_3com_initialize (bd_t * bis)
 	PRINTF("eth: 3Com Found at Address: 0x%x\n", eth_iobase);
-	pci_write_config_dword (devno, PCI_COMMAND,
+	pci_write_config_dword(devno, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 				PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 				PCI_COMMAND_MASTER);
 	 /* Check if I/O accesses and Bus Mastering are enabled */
 	ret = pci_read_config_dword(devno, PCI_COMMAND, &status);
-	if (!(status & PCI_COMMAND_IO)) {
+	if (!(status & PCI_COMMAND_IO))
 	{
 		printf("Error: Cannot enable IO access.\n");
 		goto Done;
 	}
-	if (!(status & PCI_COMMAND_MEMORY)) {
+	if (!(status & PCI_COMMAND_MEMORY))
 	{
 		printf("Error: Cannot enable MEMORY access.\n");
 		goto Done;
 	}
-	if (!(status & PCI_COMMAND_MASTER)) {
+	if (!(status & PCI_COMMAND_MASTER))
 	{
 		printf("Error: Cannot enable Bus Mastering.\n");
 		goto Done;
 	}
@ -501,31 +505,35 @@ int eth_3com_initialize (bd_t * bis)
 	/* Set the latency timer for value */
 	s = getenv("3com_latency");
-	if (s) {
+	if (s)
-		ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER,
+	{
-					     (unsigned char) atoi (s));
+	    ret = pci_write_config_byte(devno, PCI_LATENCY_TIMER, (unsigned char)atoi(s));
-	} else
+	}
-		ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x0a);
+	else ret = pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x0a);
 	read_hw_addr(dev, bis); 				/* get the MAC address from Window 2*/
 	/* Reset the ethernet controller */
 	PRINTF ("Issuing reset command....\n");
-	if (!issue_and_wait (dev, TotalReset)) {
+	if (!issue_and_wait(dev, TotalReset))
 	{
 		printf("Error: Cannot reset ethernet controller.\n");
 		goto Done;
-	} else
+	}
 	else
 		PRINTF ("Ethernet controller reset.\n");
 	/* allocate memory for rx and tx rings */
-	if (!(rx_ring = memalign (sizeof (struct rx_desc_3com) * NUM_RX_DESC, 16))) {
+	if(!(rx_ring = memalign(sizeof(struct rx_desc_3com) * NUM_RX_DESC, 16)))
 	{
 		PRINTF ("Cannot allocate memory for RX_RING.....\n");
 		goto Done;
 	}
-	if (!(tx_ring = memalign (sizeof (struct tx_desc_3com) * NUM_TX_DESC, 16))) {
+	if (!(tx_ring = memalign(sizeof(struct tx_desc_3com) * NUM_TX_DESC, 16)))
 	{
 		PRINTF ("Cannot allocate memory for TX_RING.....\n");
 		goto Done;
 	}
@ -545,7 +553,8 @@ static int eth_3com_init (struct eth_device *dev, bd_t * bis)
 	/* Determine what type of network the machine is connected to	*/
 	/* presently drops the connect to 10Mbps			*/
-	if (!auto_negotiate (dev)) {
+	if (!auto_negotiate(dev))
 	{
 		printf("Error: Cannot determine network media.\n");
 		goto Done;
 	}
@ -567,9 +576,7 @@ static int eth_3com_init (struct eth_device *dev, bd_t * bis)
 	/* Below sets which indication bits to be seen. */
-	status_enable =
+	status_enable = SetStatusEnb | HostError | DownComplete | UpComplete | (1<<6);
 		SetStatusEnb | HostError | DownComplete | UpComplete | (1 <<
 									6);
 	ETH_CMD(dev, status_enable);
 	/* Below sets no bits are to cause an interrupt since this is just polling */
@ -608,21 +615,24 @@ static int eth_3com_init (struct eth_device *dev, bd_t * bis)
 	issue_and_wait(dev, DownStall);				/* Stall and set the DownListPtr. 	*/
 	ETH_OUTL(dev, (u32)&tx_ring[tx_cur], DownListPtr);
 	issue_and_wait(dev, DownUnstall);
-	for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
+	for (i=0; !(ETH_STATUS(dev) & DownComplete); i++)
-		if (i >= TOUT_LOOP) {
+	{
-			PRINTF ("TX Ring status (Init):	0x%4x\n",
+		if (i >= TOUT_LOOP)
-				le32_to_cpu (tx_ring[tx_cur].status));
+		{
 			PRINTF("TX Ring status (Init):  0x%4x\n", le32_to_cpu(tx_ring[tx_cur].status));
 			PRINTF("ETH_STATUS: 0x%x\n", ETH_STATUS(dev));
 			goto Done;
 		}
 	}
-	if (ETH_STATUS (dev) & DownComplete) {	/* If DownLoad Complete ACK the bit       */
+	if (ETH_STATUS(dev) & DownComplete)			/* If DownLoad Complete ACK the bit 	*/
 	{
 		ETH_CMD(dev, AckIntr | DownComplete);		/* acknowledge the indication bit	*/
 		issue_and_wait(dev, DownStall);			/* stall and clear DownListPtr 		*/
 		ETH_OUTL(dev, 0, DownListPtr);
 		issue_and_wait(dev, DownUnstall);
 	}
 	status = 1;
 Done:
 	return status;
 }
@ -632,7 +642,8 @@ int eth_3com_send (struct eth_device *dev, volatile void *packet, int length)
 	int i, status = 0;
 	int tx_cur;
-	if (length <= 0) {
+	if (length <= 0)
 	{
 		PRINTF("eth: bad packet size: %d\n", length);
 		goto Done;
 	}
@ -651,14 +662,16 @@ int eth_3com_send (struct eth_device *dev, volatile void *packet, int length)
 	ETH_OUTL(dev, (u32) &tx_ring[tx_cur], DownListPtr);
 	issue_and_wait(dev, DownUnstall);
-	for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
+	for (i=0; !(ETH_STATUS(dev) & DownComplete); i++)
-		if (i >= TOUT_LOOP) {
+	{
-			PRINTF ("TX Ring status (send): 0x%4x\n",
+		if (i >= TOUT_LOOP)
-				le32_to_cpu (tx_ring[tx_cur].status));
+		{
 			PRINTF("TX Ring status (send): 0x%4x\n", le32_to_cpu(tx_ring[tx_cur].status));
 			goto Done;
 		}
 	}
-	if (ETH_STATUS (dev) & DownComplete) {	/* If DownLoad Complete ACK the bit       */
+	if (ETH_STATUS(dev) & DownComplete)			/* If DownLoad Complete ACK the bit 	*/
 	{
 		ETH_CMD(dev, AckIntr | DownComplete);		/* acknowledge the indication bit	*/
 		issue_and_wait(dev, DownStall);			/* stall and clear DownListPtr 		*/
 		ETH_OUTL(dev, 0, DownListPtr);
@ -676,7 +689,8 @@ void PrintPacket (uchar * packet, int length)
 	printf ("Printing packet of length %x.\n\n", length);
 	ptr = packet;
-	for (loop = 1; loop <= length; loop++) {
+	for (loop = 1; loop <= length; loop++)
 	{
 		printf ("%2x ", *ptr++);
 		if ((loop % 40)== 0)
 			printf ("\n");
@ -694,23 +708,26 @@ int eth_3com_recv (struct eth_device *dev)
 	status = le32_to_cpu(rx_ring[rx_next].status);		/* packet status		*/
-	while (status & (1 << 15)) {
+	while (status & (1<<15))
 	{
 		/* A packet has been received */
-		if (status & (1 << 15)) {
+		if (status & (1<<15))
 		{
 			/* A valid frame received  */
 			length = le32_to_cpu(rx_ring[rx_next].status) & 0x1fff;		/* length is in bits 0 - 12 	*/
 			/* Pass the packet up to the protocol layers */
-			NetReceive ((uchar *)
+			NetReceive((uchar *)le32_to_cpu(rx_ring[rx_next].addr), length);
 				    le32_to_cpu (rx_ring[rx_next].addr),
 				    length);
 			rx_ring[rx_next].status = 0;					/* clear the status word 	*/
 			ETH_CMD(dev, AckIntr | UpComplete);
 			issue_and_wait(dev, UpUnstall);
-		} else if (stat & HostError) {
+		}
 		else
 		if (stat & HostError)
 		{
 			/* There was an error */
 			printf("Rx error status:  0x%4x\n", stat);
@ -723,13 +740,15 @@ int eth_3com_recv (struct eth_device *dev)
 		stat = ETH_STATUS(dev);					/* register status 	*/
 		status = le32_to_cpu(rx_ring[rx_next].status);		/* packet status 	*/
 	}
 Done:
 	return length;
 }
 void eth_3com_halt(struct eth_device* dev)
 {
-	if (!(dev->iobase)) {
+	if (!(dev->iobase))
 	{
 		goto Done;
 	}
@ -752,10 +771,9 @@ static void init_rx_ring (struct eth_device *dev)
 	PRINTF("Initializing rx_ring. rx_buffer = %p\n", rx_buffer);
 	issue_and_wait(dev, UpStall);
-	for (i = 0; i < NUM_RX_DESC; i++) {
+	for (i = 0; i < NUM_RX_DESC; i++)
-		rx_ring[i].next =
+	{
-			cpu_to_le32 (((u32) &
+		rx_ring[i].next    = cpu_to_le32(((u32) &rx_ring[(i+1) % NUM_RX_DESC]));
 				      rx_ring[(i + 1) % NUM_RX_DESC]));
 		rx_ring[i].status  = 0;
 		rx_ring[i].addr    = cpu_to_le32(((u32) &rx_buffer[i][0]));
 		rx_ring[i].length  = cpu_to_le32(PKTSIZE_ALIGN | LAST_FRAG);
@ -771,7 +789,8 @@ static void purge_tx_ring (struct eth_device *dev)
 	tx_next      = 0;
-	for (i = 0; i < NUM_TX_DESC; i++) {
+	for (i = 0; i < NUM_TX_DESC; i++)
 	{
 		tx_ring[i].next    = 0;
 		tx_ring[i].status  = 0;
 		tx_ring[i].addr    = 0;
@ -789,10 +808,12 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
 	/* Read the station address from the EEPROM. */
 	EL3WINDOW(dev, 0);
-	for (i = 0; i < 0x40; i++) {
+	for (i = 0; i < 0x40; i++)
 	{
 		ETH_OUTW(dev, EEPROM_Read + i, Wn0EepromCmd);
 		/* Pause for at least 162 us. for the read to take place. */
-		for (timer = 10; timer >= 0; timer--) {
+		for (timer = 10; timer >= 0; timer--)
 		{
 			udelay(162);
 			if ((ETH_INW(dev, Wn0EepromCmd) & 0x8000) == 0)
 				break;
@ -807,10 +828,10 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
 	checksum = (checksum ^ (checksum >> 8)) & 0xff;
 	if (checksum != 0xbb)
-		printf (" *** INVALID EEPROM CHECKSUM %4.4x *** \n",
+		printf(" *** INVALID EEPROM CHECKSUM %4.4x *** \n", checksum);
 			checksum);
-	for (i = 0, j = 0; i < 3; i++) {
+	for (i = 0, j = 0; i < 3; i++)
 	{
 		hw_addr[j++] = (u8)((eeprom[i+10] >> 8) & 0xff);
 		hw_addr[j++] = (u8)(eeprom[i+10] & 0xff);
 	}
@ -821,13 +842,16 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
 	for (i = 0; i < 6; i++)
 		ETH_OUTB(dev, hw_addr[i], i);
-	for (j = 0; j < ETH_ALEN; j += 2) {
+	for (j = 0; j < ETH_ALEN; j+=2)
 	{
 		hw_addr[j]   = (u8)(ETH_INW(dev, j) & 0xff);
 		hw_addr[j+1] = (u8)((ETH_INW(dev, j) >> 8) & 0xff);
 	}
-	for (i = 0; i < ETH_ALEN; i++) {
+	for (i=0;i<ETH_ALEN;i++)
-		if (hw_addr[i] != bis->bi_enetaddr[i]) {
+	{
 		if (hw_addr[i] != bis->bi_enetaddr[i])
 		{
 /* 			printf("Warning: HW address don't match:\n"); */
 /* 			printf("Address in 3Com Window 2 is         " */
 /* 			       "%02X:%02X:%02X:%02X:%02X:%02X\n", */
@ -840,16 +864,12 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
 /* 			       bis->bi_enetaddr[4], bis->bi_enetaddr[5]); */
 /* 			goto Done; */
 		    char buffer[256];
 		    if (bis->bi_enetaddr[0] == 0 && bis->bi_enetaddr[1] == 0 &&
 			bis->bi_enetaddr[2] == 0 && bis->bi_enetaddr[3] == 0 &&
 			bis->bi_enetaddr[4] == 0 && bis->bi_enetaddr[5] == 0)
 		    {
-			if (bis->bi_enetaddr[0] == 0
+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X",
 			    && bis->bi_enetaddr[1] == 0
 			    && bis->bi_enetaddr[2] == 0
 			    && bis->bi_enetaddr[3] == 0
 			    && bis->bi_enetaddr[4] == 0
 			    && bis->bi_enetaddr[5] == 0) {
 				sprintf (buffer,
 					 "%02X:%02X:%02X:%02X:%02X:%02X",
 				hw_addr[0], hw_addr[1], hw_addr[2],
 				hw_addr[3], hw_addr[4], hw_addr[5]);
 			setenv("ethaddr", buffer);
@ -857,8 +877,7 @@ static void read_hw_addr (struct eth_device *dev, bd_t * bis)
 		}
 	}
-	for (i = 0; i < ETH_ALEN; i++)
+	for(i=0; i<ETH_ALEN; i++) dev->enetaddr[i] = hw_addr[i];
 		dev->enetaddr[i] = hw_addr[i];
 Done:
 	return;
--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@ -197,18 +197,17 @@ static unsigned char kbd_ctrl_xlate[] = {
 int isa_kbd_init(void)
 {
 	char* result;
 	result=kbd_initialize();
-	if (result != NULL) {
+	if (result != NULL)
 	{
 	    result = kbd_initialize();
 	}
 	if(result==NULL) {
 		printf("AT Keyboard initialized\n");
-		irq_install_handler (KBD_INTERRUPT,
+		irq_install_handler(KBD_INTERRUPT, (interrupt_handler_t *)kbd_interrupt, NULL);
 				     (interrupt_handler_t *) kbd_interrupt,
 				     NULL);
 		return (1);
-	} else {
+	}
 	else {
 		printf("%s\n",result);
 		return (-1);
 	}
@ -302,6 +301,7 @@ int kbd_getc(void)
 }
 /* set LEDs */
 void kbd_set_leds(void)
@ -322,6 +322,7 @@ void kbd_set_leds(void)
 	kbd_send_data(leds);
 }
 void handle_keyboard_event(unsigned char scancode)
 {
 	unsigned char keycode;
@ -341,13 +342,13 @@ void handle_keyboard_event (unsigned char scancode)
 			((scancode)==0x48)|| /* arrow up */
 			((scancode)==0x50)|| /* arrow down */
 			((scancode)==0x4b)|| /* arrow left */
-		      ((scancode) == 0x4d)))
+			((scancode)==0x4d)))  /* arrow right */
 			/* arrow right */
 			/* we swallow unknown e0 codes */
 			return;
 	}
 	/* special cntrl keys */
-	switch (scancode) {
+	switch(scancode)
 	{
 	case 0x48:
 	    kbd_put_queue(27);
 	    kbd_put_queue(91);
@ -369,9 +370,9 @@ void handle_keyboard_event (unsigned char scancode)
 	    kbd_put_queue('C');
 	    return;
 	case 0x58: /* F12 key */
-		if (ctrl == 1) {
+	    if (ctrl == 1)
 	    {
 		extern int console_changed;
 		setenv("stdin", DEVNAME);
 		setenv("stdout", "vga");
 		console_changed = 1;
@ -475,8 +476,10 @@ unsigned char handle_kbd_event (void)
 		/* Error bytes must be ignored to make the
 		   Synaptics touchpads compaq use work */
 		/* Ignore error bytes */
-		if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
+		if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR)))
-			if (status & KBD_STAT_MOUSE_OBF);	/* not supported: handle_mouse_event(scancode); */
+		{
 			if (status & KBD_STAT_MOUSE_OBF)
 				; /* not supported: handle_mouse_event(scancode); */
 			else
 				handle_keyboard_event(scancode);
 		}
@ -487,6 +490,7 @@ unsigned char handle_kbd_event (void)
 	return status;
 }
 /******************************************************************************
 * Lowlevel Part of keyboard section
 */
@ -532,7 +536,8 @@ int kbd_wait_for_input (void)
 	timeout = KBD_TIMEOUT;
 	val=kbd_read_data();
-	while (val < 0) {
+	while(val < 0)
 	{
 		if(timeout--==0)
 			return -1;
 		udelay(1000);
@ -548,7 +553,6 @@ int kb_wait (void)
 	do {
 		unsigned char status = handle_kbd_event();
 		if (!(status & KBD_STAT_IBF))
 			return 0; /* ok */
 		udelay(1000);
@ -574,7 +578,6 @@ void kbd_write_output_w (int data)
 void kbd_send_data(unsigned char data)
 {
 	unsigned char status;
 	i8259_mask_irq(KBD_INTERRUPT); /* disable interrupt */
 	kbd_write_output_w(data);
 	status = kbd_wait_for_input();
@ -623,7 +626,8 @@ char *kbd_initialize (void)
 		status = kbd_wait_for_input();
 		if (status == KBD_REPLY_ACK)
 			break;
-		if (status != KBD_REPLY_RESEND) {
+		if (status != KBD_REPLY_RESEND)
 		{
 			PRINTF("status: %X\n",status);
 			return "Kbd:   reset failed, no ACK";
 		}
@ -649,7 +653,8 @@ char *kbd_initialize (void)
 	kbd_write_command_w(KBD_CCMD_WRITE_MODE);
 	kbd_write_output_w(KBD_MODE_KBD_INT
 			      | KBD_MODE_SYS
-			    | KBD_MODE_DISABLE_MOUSE | KBD_MODE_KCC);
+			      | KBD_MODE_DISABLE_MOUSE
 			      | KBD_MODE_KCC);
 	/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
 	kbd_write_command_w(KBD_CCMD_READ_MODE);
--- a/board/MAI/AmigaOneG3SE/u-boot.lds
+++ b/board/MAI/AmigaOneG3SE/u-boot.lds
@ -29,6 +29,7 @@
 */
 OUTPUT_ARCH(powerpc)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
 /* Do we need any of these for elf?
   __DYNAMIC = 0;    */
 SECTIONS
@ -127,7 +128,7 @@ SECTIONS
  __init_end = .;
  __bss_start = .;
-  .bss (NOLOAD)       :
+  .bss       :
  {
   *(.sbss) *(.scommon)
   *(.dynbss)
--- a/board/MAI/AmigaOneG3SE/video.c
+++ b/board/MAI/AmigaOneG3SE/video.c
@ -56,7 +56,6 @@ int  video_rows(void);
 int  video_cols(void);
 char *prompt_string = "=>";
 unsigned char video_get_attr(void);
 void video_set_color(unsigned char attr)
 {
--- a/board/MAI/bios_emulator/bios.c
+++ b/board/MAI/bios_emulator/bios.c
@ -0,0 +1,335 @@
 /*
 * Mostly done after the Scitech Bios emulation
 * Written by Hans-Jörg Frieden
 * Hyperion Entertainment
 */
 #include "x86emu.h"
 #include "glue.h"
 #undef DEBUG
 #ifdef DEBUG
 #define PRINTF(fmt, args...) printf(fmt, ## args)
 #else
 #define PRINTF(fmt, args...)
 #endif
 #define BIOS_SEG 0xFFF0
 #define PCIBIOS_SUCCESSFUL 0
 #define PCIBIOS_DEVICE_NOT_FOUND 0x86
 typedef unsigned char UBYTE;
 typedef unsigned short UWORD;
 typedef unsigned long ULONG;
 typedef char BYTE;
 typedef short WORT;
 typedef long LONG;
 static inline UBYTE read_byte(volatile UBYTE* from)
 {
    int x;
    asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
    return (UBYTE)x;
 }
 static inline void write_byte(volatile UBYTE *to, int x)
 {
    asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
 }
 static inline UWORD read_word_little(volatile UWORD *from)
 {
    int x;
    asm volatile ("lhbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m" (*from));
    return (UWORD)x;
 }
 static inline UWORD read_word_big(volatile UWORD *from)
 {
    int x;
    asm volatile ("lhz %0,%1\n eieio" : "=r" (x) : "m" (*from));
    return (UWORD)x;
 }
 static inline void write_word_little(volatile UWORD *to, int x)
 {
    asm volatile ("sthbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
 }
 static inline void write_word_big(volatile UWORD *to, int x)
 {
    asm volatile ("sth %1,%0\n eieio" : "=m" (*to) : "r" (x));
 }
 static inline ULONG read_long_little(volatile ULONG *from)
 {
    unsigned long x;
    asm volatile ("lwbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m"(*from));
    return (ULONG)x;
 }
 static inline ULONG read_long_big(volatile ULONG *from)
 {
    unsigned long x;
    asm volatile ("lwz %0,%1\n eieio" : "=r" (x) : "m" (*from));
    return (ULONG)x;
 }
 static inline void write_long_little(volatile ULONG *to, ULONG x)
 {
    asm volatile ("stwbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
 }
 static inline void write_long_big(volatile ULONG *to, ULONG x)
 {
    asm volatile ("stw %1,%0\n eieio" : "=m" (*to) : "r" (x));
 }
 #define port_to_mem(from) (0xFE000000|(from))
 #define in_byte(from) read_byte( (UBYTE *)port_to_mem(from))
 #define in_word(from) read_word_little((UWORD *)port_to_mem(from))
 #define in_long(from) read_long_little((ULONG *)port_to_mem(from))
 #define out_byte(to, val) write_byte((UBYTE *)port_to_mem(to), val)
 #define out_word(to, val) write_word_little((UWORD *)port_to_mem(to), val)
 #define out_long(to, val) write_long_little((ULONG *)port_to_mem(to), val)
 static void X86API undefined_intr(int intno)
 {
    extern u16 A1_rdw(u32 addr);
    if (A1_rdw(intno * 4 + 2) == BIOS_SEG)
    {
 	PRINTF("Undefined interrupt %xh called AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
 	   intno, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
 	X86EMU_halt_sys();
    }
    else
    {
 	PRINTF("Calling interrupt %xh, AL=%xh, AH=%xh\n", intno, M.x86.R_AL, M.x86.R_AH);
 	X86EMU_prepareForInt(intno);
    }
 }
 static void X86API int42(int intno);
 static void X86API int15(int intno);
 static void X86API int10(int intno)
 {
    if (A1_rdw(intno*4+2) == BIOS_SEG)
 	int42(intno);
    else
    {
 	PRINTF("int10: branching to %04X:%04X, AL=%xh, AH=%xh\n", A1_rdw(intno*4+2), A1_rdw(intno*4),
 	       M.x86.R_AL, M.x86.R_AH);
 	X86EMU_prepareForInt(intno);
    }
 }
 static void X86API int1A(int intno)
 {
    int device;
    switch(M.x86.R_AX)
    {
    case 0xB101: /* PCI Bios Present? */
 	M.x86.R_AL  = 0x00;
 	M.x86.R_EDX = 0x20494350;
 	M.x86.R_BX  = 0x0210;
 	M.x86.R_CL  = 3;
 	CLEAR_FLAG(F_CF);
 	break;
    case 0xB102: /* Find device */
 	device = mypci_find_device(M.x86.R_DX, M.x86.R_CX, M.x86.R_SI);
 	if (device != -1)
 	{
 	    M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	    M.x86.R_BH = mypci_bus(device);
 	    M.x86.R_BL = mypci_devfn(device);
 	}
 	else
 	{
 	    M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	break;
    case 0xB103: /* Find PCI class code */
 	M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
 	/*printf("Find by class not yet implmented"); */
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	break;
    case 0xB108: /* read config byte */
 	M.x86.R_CL = mypci_read_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
 	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	/*printf("read_config_byte %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
 	/*	    M.x86.R_CL); */
 	break;
    case 0xB109: /* read config word */
 	M.x86.R_CX = mypci_read_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
 	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	/*printf("read_config_word %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
 	/*	    M.x86.R_CX); */
 	break;
    case 0xB10A: /* read config dword */
 	M.x86.R_ECX = mypci_read_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
 	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	/*printf("read_config_long %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
 	/*    M.x86.R_ECX); */
 	break;
    case 0xB10B: /* write config byte */
 	mypci_write_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CL);
 	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	/*printf("write_config_byte %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
 	/*    M.x86.R_CL); */
 	break;
    case 0xB10C: /* write config word */
 	mypci_write_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CX);
 	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	/*printf("write_config_word %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
 	/*	    M.x86.R_CX); */
 	break;
    case 0xB10D: /* write config dword */
 	mypci_write_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_ECX);
 	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
 	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
 	/*printf("write_config_long %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
 	/*	    M.x86.R_ECX); */
 	break;
    default:
 	PRINTF("BIOS int %xh: Unknown function AX=%04xh\n", intno, M.x86.R_AX);
    }
 }
 void bios_init(void)
 {
    int i;
    X86EMU_intrFuncs bios_intr_tab[256];
    for (i=0; i<256; i++)
    {
 	write_long_little(M.mem_base+i*4, BIOS_SEG<<16);
 	bios_intr_tab[i] = undefined_intr;
    }
    bios_intr_tab[0x10] = int10;
    bios_intr_tab[0x1A] = int1A;
    bios_intr_tab[0x42] = int42;
    bios_intr_tab[0x15] = int15;
    bios_intr_tab[0x6D] = int42;
    X86EMU_setupIntrFuncs(bios_intr_tab);
    video_init();
 }
 unsigned char setup_40x25[] =
 {
    0x38, 0x28, 0x2d, 0x0a, 0x1f, 6, 0x19,
    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
 };
 unsigned char setup_80x25[] =
 {
    0x71, 0x50, 0x5a, 0x0a, 0x1f, 6, 0x19,
    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
 };
 unsigned char setup_graphics[] =
 {
    0x38, 0x28, 0x20, 0x0a, 0x7f, 6, 0x64,
    0x70, 2, 1, 6, 7, 0, 0, 0, 0
 };
 unsigned char setup_bw[] =
 {
    0x61, 0x50, 0x52, 0x0f, 0x19, 6, 0x19,
    0x19, 2, 0x0d, 0x0b, 0x0c, 0, 0, 0, 0
 };
 unsigned char * setup_modes[] =
 {
    setup_40x25,     /* mode 0: 40x25 bw text */
    setup_40x25,     /* mode 1: 40x25 col text */
    setup_80x25,     /* mode 2: 80x25 bw text */
    setup_80x25,     /* mode 3: 80x25 col text */
    setup_graphics,  /* mode 4: 320x200 col graphics */
    setup_graphics,  /* mode 5: 320x200 bw graphics */
    setup_graphics,  /* mode 6: 640x200 bw graphics */
    setup_bw         /* mode 7: 80x25 mono text */
 };
 unsigned int setup_cols[] =
 {
    40, 40, 80, 80, 40, 40, 80, 80
 };
 unsigned char setup_modesets[] =
 {
     0x2C, 0x28, 0x2D, 0x29, 0x2A, 0x2E, 0x1E, 0x29
 };
 unsigned int setup_bufsize[] =
 {
    2048, 2048, 4096, 2096, 16384, 16384, 16384, 4096
 };
 void bios_set_mode(int mode)
 {
    int i;
    unsigned char mode_set = setup_modesets[mode]; /* Control register value */
    unsigned char *setup_regs = setup_modes[mode]; /* Register 3D4 Array */
    /* Switch video off */
    out_byte(0x3D8, mode_set & 0x37);
    /* Set up parameters at 3D4h */
    for (i=0; i<16; i++)
    {
 	out_byte(0x3D4, (unsigned char)i);
 	out_byte(0x3D5, *setup_regs);
 	setup_regs++;
    }
    /* Enable video */
    out_byte(0x3D8, mode_set);
    /* Set overscan */
    if (mode == 6) out_byte(0x3D9, 0x3F);
    else           out_byte(0x3D9, 0x30);
 }
 static void bios_print_string(void)
 {
    extern void video_bios_print_string(char *string, int x, int y, int attr, int count);
    char *s = (char *)(M.x86.R_ES<<4) + M.x86.R_BP;
    int attr;
    if (M.x86.R_AL & 0x02) attr = - 1;
    else                   attr = M.x86.R_BL;
    video_bios_print_string(s, M.x86.R_DH, M.x86.R_DL, attr, M.x86.R_CX);
 }
 static void X86API int42(int intno)
 {
    switch (M.x86.R_AH)
    {
    case 0x00:
 	bios_set_mode(M.x86.R_AL);
 	break;
    case 0x13:
 	bios_print_string();
 	break;
    default:
 	PRINTF("Warning: VIDEO BIOS interrupt %xh unimplemented function %xh, AL = %xh\n",
 	       intno, M.x86.R_AH, M.x86.R_AL);
    }
 }
 static void X86API int15(int intno)
 {
    PRINTF("Called interrupt 15h: AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
 	   M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
 }
--- a/board/MAI/bios_emulator/glue.c
+++ b/board/MAI/bios_emulator/glue.c
@ -0,0 +1,515 @@
 #include <common.h>
 #include <pci.h>
 #include <74xx_7xx.h>
 #ifdef DEBUG
 #undef DEBUG
 #endif
 #ifdef DEBUG
 #define PRINTF(format, args...) _printf(format , ## args)
 #else
 #define PRINTF(format, argc...)
 #endif
 static pci_dev_t to_pci(int bus, int devfn)
 {
    return PCI_BDF(bus, (devfn>>3), devfn&3);
 }
 int mypci_find_device(int vendor, int product, int index)
 {
    return pci_find_device(vendor, product, index);
 }
 int mypci_bus(int device)
 {
    return PCI_BUS(device);
 }
 int mypci_devfn(int device)
 {
    return (PCI_DEV(device)<<3) | PCI_FUNC(device);
 }
 #define mypci_read_func(type, size)				\
 type mypci_read_cfg_##size##(int bus, int devfn, int offset)	\
 {								\
    type c;							\
    pci_read_config_##size##(to_pci(bus, devfn), offset, &c);	\
    return c;							\
 }
 #define mypci_write_func(type, size)				\
 void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value)	\
 {								\
    pci_write_config_##size##(to_pci(bus, devfn), offset, value);	\
 }
 mypci_read_func(u8,byte);
 mypci_read_func(u16,word);
 mypci_write_func(u8,byte);
 mypci_write_func(u16,word);
 u32 mypci_read_cfg_long(int bus, int devfn, int offset)
 {
    u32 c;
    pci_read_config_dword(to_pci(bus, devfn), offset, &c);
    return c;
 }
 void mypci_write_cfg_long(int bus, int devfn, int offset, int value)
 {
    pci_write_config_dword(to_pci(bus, devfn), offset, value);
 }
 void _printf(const char *fmt, ...)
 {
    va_list args;
    char buf[CFG_PBSIZE];
    va_start(args, fmt);
    (void)vsprintf(buf, fmt, args);
    va_end(args);
    printf(buf);
 }
 char *_getenv(char *name)
 {
    return getenv(name);
 }
 unsigned long get_bar_size(pci_dev_t dev, int offset)
 {
    u32 bar_back, bar_value;
    /*  Save old BAR value */
    pci_read_config_dword(dev, offset, &bar_back);
    /*  Write all 1's. */
    pci_write_config_dword(dev, offset, ~0);
    /*  Now read back the relevant bits */
    pci_read_config_dword(dev, offset, &bar_value);
    /*  Restore original value */
    pci_write_config_dword(dev, offset, bar_back);
    if (bar_value == 0) return 0xFFFFFFFF; /*  This BAR is disabled */
    if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY)
    {
 	/*  This is a memory space BAR. Mask it out so we get the size of it */
 	return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1;
    }
    /*  Not suitable */
    return 0xFFFFFFFF;
 }
 void enable_compatibility_hole(void)
 {
    u8 cfg;
    pci_dev_t art = PCI_BDF(0,0,0);
    pci_read_config_byte(art, 0x54, &cfg);
    /* cfg |= 0x08; */
    cfg |= 0x20;
    pci_write_config_byte(art, 0x54, cfg);
 }
 void disable_compatibility_hole(void)
 {
    u8 cfg;
    pci_dev_t art = PCI_BDF(0,0,0);
    pci_read_config_byte(art, 0x54, &cfg);
    /* cfg &= ~0x08; */
    cfg &= ~0x20;
    pci_write_config_byte(art, 0x54, cfg);
 }
 void map_rom(pci_dev_t dev, u32 address)
 {
    pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE);
 }
 void unmap_rom(pci_dev_t dev)
 {
    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
 }
 void bat_map(u8 batnum, u32 address, u32 length)
 {
    u32 temp = address;
    address &= 0xFFFE0000;
    temp    &= 0x0001FFFF;
    length = (length - 1 ) >> 17;
    length <<= 2;
    switch (batnum)
    {
    case 0:
 	__asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3));
 	__asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22));
 	break;
    case 1:
 	__asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3));
 	__asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22));
 	break;
    case 2:
 	__asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3));
 	__asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22));
 	break;
    case 3:
 	__asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3));
 	__asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22));
 	break;
    }
 }
 int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size);
 int attempt_map_rom(pci_dev_t dev, void *copy_address)
 {
    u32 rom_size      = 0;
    u32 rom_address   = 0;
    u32 bar_size      = 0;
    u32 bar_backup    = 0;
    int i,j;
    void *image       = 0;
    u32 image_size    = 0;
    int did_correct   = 0;
    u32 prefetch_addr = 0;
    u32 prefetch_size = 0;
    u32 prefetch_idx  = 0;
    /*  Get the size of the expansion rom */
    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
    pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
    if ((rom_size & 0x01) == 0)
    {
 	PRINTF("No ROM\n");
 	return 0;
    }
    rom_size &= 0xFFFFF800;
    rom_size = (~rom_size)+1;
    PRINTF("ROM Size is %dK\n", rom_size/1024);
    /*
     * Try to find a place for the ROM. We always attempt to use
     * one of the card's bases for this, as this will be in any
     * bridge's resource range as well as being free of conflicts
     * with other cards. In a graphics card it is very unlikely
     * that there won't be any base address that is large enough to
     * hold the rom.
     *
     * FIXME: To work around this, theoretically the largest base
     * could be used if none is found in the loop below.
     */
    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
    {
 	bar_size = get_bar_size(dev, i);
 	PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n",
 	       (i - PCI_BASE_ADDRESS_0)/4,
 	       bar_size/1024);
 	if (bar_size != 0xFFFFFFFF && bar_size >= rom_size)
 	{
 	    PRINTF("Found a match for rom size\n");
 	    pci_read_config_dword(dev, i, &rom_address);
 	    rom_address &= 0xFFFFFFF0;
 	    if (rom_address != 0 && rom_address != 0xFFFFFFF0) break;
 	}
    }
    if (rom_address == 0 || rom_address == 0xFFFFFFF0)
    {
 	PRINTF("No suitable rom address found\n");
 	return 0;
    }
    /*  Disable the BAR */
    pci_read_config_dword(dev, i, &bar_backup);
    pci_write_config_dword(dev, i, 0);
    /*  Map ROM */
    pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
    /*  Copy the rom to a place in the emulator space */
    PRINTF("Claiming BAT 2\n");
    bat_map(2, rom_address, rom_size);
    /* show_bat_mapping(); */
    if (0 == find_image(rom_address, rom_size, &image, &image_size))
    {
 	PRINTF("No x86 BIOS image found\n");
 	return 0;
    }
    PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address);
    /* memcpy(copy_address, rom_address, rom_size); */
    {
 	unsigned char *from = (unsigned char *)image; /* rom_address; */
 	unsigned char *to = (unsigned char *)copy_address;
 	for (j=0; j<image_size /*rom_size*/; j++)
 	{
 	    *to++ = *from++;
 	}
    }
    PRINTF("Copy is done\n");
    /*  Unmap the ROM and restore the BAR */
    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
    pci_write_config_dword(dev, i, bar_backup);
    /*  FIXME: Shouldn't be needed anymore*/
    /* bat_map(2, 0x80000000, 256*1024*1024);
       show_bat_mapping(); */
    /*
     * Since most cards can probably only do 16 bit IO addressing, we
     * correct their IO base into an appropriate value.
     * This should do for most.
     */
    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
    {
 	unsigned long value;
 	pci_read_config_dword(dev, i, &value);
 	if (value & 0x01) /*  IO */
 	{
 	    did_correct = 1;
 	    pci_write_config_dword(dev, i, 0x1001);
 	    break;
 	}
 	if (value & PCI_BASE_ADDRESS_MEM_PREFETCH)
 	{
 	    prefetch_idx = i;
 	    prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK;
 	    prefetch_size = get_bar_size(dev, i);
 	}
    }
    if (1) /* did_correct) */
    {
 	extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr);
 	int busnr = PCI_BUS(dev);
 	if (busnr)
 	{
 	    pci_dev_t bridge;
 	    PRINTF("Need to correct bridge device for IO range change\n");
 	    bridge = pci_find_bridge_for_bus(NULL, busnr);
 	    if (bridge == PCI_ANY_ID)
 	    {
 		PRINTF("Didn't find bridge. Hope that's OK\n");
 	    }
 	    else
 	    {
 		/*
 		 * Set upper I/O base/limit to 0
 		 */
 		pci_write_config_byte(bridge, 0x30, 0x00);
 		pci_write_config_byte(bridge, 0x31, 0x00);
 		pci_write_config_byte(bridge, 0x32, 0x00);
 		pci_write_config_byte(bridge, 0x33, 0x00);
 		if (did_correct)
 		{
 		    /*
 		     * set lower I/O base to 1000
 		     * That is, bits 0:3 are set to 0001 by default.
 		     * bits 7:4 contain I/O address bits 15:12
 		     * all others are assumed 0.
 		     */
 		    pci_write_config_byte(bridge, 0x1C, 0x11);
 		    /*
 		     * Set lower I/O limit to 1FFF
 		     * That is, bits 0:3 are reserved and always 0000
 		     * Bits 7:4 contain I/O address bits 15:12
 		     * All others are assumed F.
 		     */
 		    pci_write_config_byte(bridge, 0x1D, 0x10);
 		    pci_write_config_byte(bridge, 0x0D, 0x20);
 		    PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n",
 			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
 		}
 		else
 		{
 		    /*
 		     * This card doesn't have I/O, we disable I/O forwarding
 		     */
 		    pci_write_config_byte(bridge, 0x1C, 0x11);
 		    pci_write_config_byte(bridge, 0x1D, 0x00);
 		    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
 		    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
 		    pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
 		    PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n",
 			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
 		}
 	    }
 	    /*
 	     * Correct the prefetchable memory base, which is not set correctly by
 	     * the U-Boot autoconfig stuff
 	     */
 	    if (prefetch_idx)
 	    {
 /* 		PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */
 /* 		       prefetch_addr, prefetch_addr+prefetch_size, */
 /* 		       prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */
 /* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */
 /* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */
 	    }
 	    pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000);
 	    pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000);
 	    pci_write_config_byte(bridge, 0xD0, 0x0A);
 	    pci_write_config_byte(bridge, 0xD3, 0x04);
 	    /*
 	     * Set the interrupt pin to 0
 	     */
 #if 0
 	    pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0);
 	    pci_write_config_byte(dev, PCI_INTERRUPT_PIN, 0);
 #endif
 	    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
 	    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
 	}
    }
    /* Finally, enable the card's IO and memory response */
    pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
    pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
    pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
    return 1;
 }
 int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size)
 {
    int i = 0;
    unsigned char *rom = (unsigned char *)rom_address;
    /* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; /* No bios rom this is, yes. */ */
    for (;;)
    {
 	unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19);
 	unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512;
 	unsigned char pci_image_type = *(rom+pci_data_offset+0x14);
 	if (*rom != 0x55 || *(rom+1) != 0xAA)
 	{
 	    PRINTF("Invalid header this is\n");
 	    return 0;
 	}
 	PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type,
 	       pci_image_type==0 ? "x86" :
 	       pci_image_type==1 ? "OpenFirmware" :
 	       "Unknown");
 	if (pci_image_type == 0)
 	{
 	    *image = rom;
 	    *image_size = pci_image_length;
 	    return 1;
 	}
 	if (*(rom+pci_data_offset+0x15) & 0x80)
 	{
 	    PRINTF("LAST image encountered, no image found\n");
 	    return 0;
 	}
 	rom += pci_image_length;
    }
 }
 void show_bat_mapping(void)
 {
    u32 dbat0u, dbat0l, ibat0u, ibat0l;
    u32 dbat1u, dbat1l, ibat1u, ibat1l;
    u32 dbat2u, dbat2l, ibat2u, ibat2l;
    u32 dbat3u, dbat3l, ibat3u, ibat3l;
    u32 msr, hid0, l2cr_reg;
    __asm volatile ("mfdbatu %0,0" : "=r" (dbat0u));
    __asm volatile ("mfdbatl %0,0" : "=r" (dbat0l));
    __asm volatile ("mfibatu %0,0" : "=r" (ibat0u));
    __asm volatile ("mfibatl %0,0" : "=r" (ibat0l));
    __asm volatile ("mfdbatu %0,1" : "=r" (dbat1u));
    __asm volatile ("mfdbatl %0,1" : "=r" (dbat1l));
    __asm volatile ("mfibatu %0,1" : "=r" (ibat1u));
    __asm volatile ("mfibatl %0,1" : "=r" (ibat1l));
    __asm volatile ("mfdbatu %0,2" : "=r" (dbat2u));
    __asm volatile ("mfdbatl %0,2" : "=r" (dbat2l));
    __asm volatile ("mfibatu %0,2" : "=r" (ibat2u));
    __asm volatile ("mfibatl %0,2" : "=r" (ibat2l));
    __asm volatile ("mfdbatu %0,3" : "=r" (dbat3u));
    __asm volatile ("mfdbatl %0,3" : "=r" (dbat3l));
    __asm volatile ("mfibatu %0,3" : "=r" (ibat3u));
    __asm volatile ("mfibatl %0,3" : "=r" (ibat3l));
    __asm volatile ("mfmsr %0"     : "=r" (msr));
    __asm volatile ("mfspr %0,1008": "=r" (hid0));
    __asm volatile ("mfspr %0,1017": "=r" (l2cr_reg));
    printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n",
 	   dbat0u, dbat0l, ibat0u, ibat0l);
    printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n",
 	   dbat1u, dbat1l, ibat1u, ibat1l);
    printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n",
 	   dbat2u, dbat2l, ibat2u, ibat2l);
    printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n",
 	   dbat3u, dbat3l, ibat3u, ibat3l);
    printf("\nMSR: %08x   HID0: %08x   L2CR: %08x \n", msr,hid0, l2cr_reg);
 }
 void remove_init_data(void)
 {
    char *s;
    /*  Invalidate and disable data cache */
    invalidate_l1_data_cache();
    dcache_disable();
    s = getenv("x86_cache");
    if (!s)
    {
 	icache_enable();
 	dcache_enable();
    }
    else if (s)
    {
 	if (strcmp(s, "dcache")==0)
 	{
 	    dcache_enable();
 	}
 	else if (strcmp(s, "icache") == 0)
 	{
 	    icache_enable();
 	}
 	else if (strcmp(s, "on")== 0 || strcmp(s, "both") == 0)
 	{
 	    dcache_enable();
 	    icache_enable();
 	}
    }
    /*   show_bat_mapping();*/
 }
--- a/board/MAI/bios_emulator/glue.h
+++ b/board/MAI/bios_emulator/glue.h
@ -0,0 +1,57 @@
 #ifndef GLUE_H
 #define GLUE_H
 typedef unsigned int pci_dev_t;
 int mypci_find_device(int vendor, int product, int index);
 int mypci_bus(int device);
 int mypci_devfn(int device);
 unsigned long get_bar_size(pci_dev_t dev, int offset);
 u8   mypci_read_cfg_byte(int bus, int devfn, int offset);
 u16  mypci_read_cfg_word(int bus, int devfn, int offset);
 u32  mypci_read_cfg_long(int bus, int devfn, int offset);
 void mypci_write_cfg_byte(int bus, int devfn, int offset, u8 value);
 void mypci_write_cfg_word(int bus, int devfn, int offset, u16 value);
 void mypci_write_cfg_long(int bus, int devfn, int offset, u32 value);
 void _printf(const char *fmt, ...);
 char *_getenv(char *name);
 void *malloc(size_t size);
 void memset(void *addr, int value, size_t size);
 void memcpy(void *to, void *from, size_t numbytes);
 int  strcmp(char *, char *);
 void enable_compatibility_hole(void);
 void disable_compatibility_hole(void);
 void map_rom(pci_dev_t dev, unsigned long address);
 void unmap_rom(pci_dev_t dev);
 int  attempt_map_rom(pci_dev_t dev, void *copy_address);
 #define  PCI_BASE_ADDRESS_SPACE 0x01    /* 0 = memory, 1 = I/O */
 #define  PCI_BASE_ADDRESS_SPACE_IO 0x01
 #define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
 #define  PCI_BASE_ADDRESS_MEM_MASK      (~0x0fUL)
 #define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
 #define PCI_BASE_ADDRESS_1      0x14    /* 32 bits [htype 0,1 only] */
 #define PCI_BASE_ADDRESS_2      0x18    /* 32 bits [htype 0 only] */
 #define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
 #define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
 #define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
 #define PCI_BUS(d)      (((d) >> 16) & 0xff)
 #define PCI_DEV(d)      (((d) >> 11) & 0x1f)
 #define PCI_FUNC(d)     (((d) >> 8) & 0x7)
 #define PCI_BDF(b,d,f)  ((b) << 16 | (d) << 11 | (f) << 8)
 #define PCI_ANY_ID (~0)
 #define PCI_ROM_ADDRESS         0x30    /* Bits 31..11 are address, 10..1 reserved */
 #define PCI_ROM_ADDRESS_ENABLE 0x01
 #define OFF(addr) ((addr) & 0xFFFF)
 #define SEG(addr) (((addr)>>4) &0xF000)
 #endif
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/trans
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/trans
--- a/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat
@ -0,0 +1,28 @@
@echo off
 REM Setup for compiling with Borland C++ 3.1.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC3;%BC3_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC3;%BC3_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC3_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC3.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_SNAP=
 PATH %SCITECH_BIN%;%BC3_PATH%\BIN;%DEFPATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC3_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BC3_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BC3_PATH%\BIN\tlink.cfg
 echo Borland C++ 3.1 DOS compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat
@ -0,0 +1,37 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto createfiles
 call win32sdk.bat borland
 :createfiles
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
 echo Borland C++ 4.5 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat
@ -0,0 +1,32 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 16 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
 echo Borland C++ 4.5 16 bit DOS compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat
@ -0,0 +1,33 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 32 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
 echo Borland C++ 4.5 32 bit DOS compilation configuration set up (DPMI32).
--- a/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat
@ -0,0 +1,32 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=1
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
 echo Borland C++ 4.5 Snap compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat
@ -0,0 +1,46 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 32 bit mode with Phar Lap TNT
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=1
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM If you set the following to a 1, a TNT DosStyle app will be created.
 REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
 REM run under real DOS when using our libraries, since we require access
 REM to functions that the Win32 API does not support (such as direct access
 REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
 REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
 REM work too well).
 REM
 REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
 REM and hence will never be able to run under Win95 or WinNT, only DOS.
 SET DOSSTYLE=
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
 echo Borland C++ 4.5 32 bit DOS compilation configuration set up (TNT).
--- a/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat
@ -0,0 +1,32 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows VxD mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=1
 SET USE_TNT=
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
 echo Borland C++ 4.5 32-bit VxD compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat
@ -0,0 +1,32 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 16 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
 SET USE_DPMI16=
 SET USE_WIN16=1
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_BC5=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
 echo Borland C++ 4.5 16 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat
@ -0,0 +1,37 @@
@echo off
 REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_BC5=
 SET WIN32_GUI=1
 SET USE_SNAP=
 SET BC_LIBBASE=BC4
 PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto createfiles
 call win32sdk.bat borland
 :createfiles
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
 echo Borland C++ 4.5 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat
@ -0,0 +1,40 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET C_INCLUDE=%BC5_PATH%\INCLUDE
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto createfiles
 call win32sdk.bat borland
 :createfiles
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 16 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
 echo Borland C++ 5.0 16 bit DOS compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat
@ -0,0 +1,35 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit DOS compilation configuration set up (DPMI32).
--- a/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat
@ -0,0 +1,35 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=1
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit SMX compilation configuration set up (SMX32).
--- a/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=1
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 Snap compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat
@ -0,0 +1,48 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit mode with Phar Lap TNT
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=1
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM If you set the following to a 1, a TNT DosStyle app will be created.
 REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
 REM run under real DOS when using our libraries, since we require access
 REM to functions that the Win32 API does not support (such as direct access
 REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
 REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
 REM work too well).
 REM
 REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
 REM and hence will never be able to run under Win95 or WinNT, only DOS.
 SET DOSSTYLE=
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit DOS compilation configuration set up (TNT).
--- a/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=1
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit Windows (VxD) compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat
@ -0,0 +1,34 @@
 @echo off
 REM Setup for compiling with Borland C++ 5.0 in 16 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
 SET USE_DPMI16=
 SET USE_WIN16=1
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_BC5=1
 SET USE_SMX32=
 SET USE_SMX16=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
 echo Borland C++ 5.0 16 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat
@ -0,0 +1,40 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET C_INCLUDE=%BC5_PATH%\INCLUDE
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=1
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto createfiles
 call win32sdk.bat borland
 :createfiles
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=1
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
 echo Borland C++ 5.0 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat
@ -0,0 +1,40 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET C_INCLUDE=%BCB5_PATH%\INCLUDE
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto createfiles
 call win32sdk.bat borland
 :createfiles
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
 echo Borland C++ Builder 5.0 16 bit DOS compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat
@ -0,0 +1,35 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (DPMI32).
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat
@ -0,0 +1,35 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=1
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit SMX compilation configuration set up (SMX32).
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=1
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 Snap compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat
@ -0,0 +1,48 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode with Phar Lap TNT
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_DPMI16=
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_TNT=1
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
 REM If you set the following to a 1, a TNT DosStyle app will be created.
 REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
 REM run under real DOS when using our libraries, since we require access
 REM to functions that the Win32 API does not support (such as direct access
 REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
 REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
 REM work too well).
 REM
 REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
 REM and hence will never be able to run under Win95 or WinNT, only DOS.
 SET DOSSTYLE=
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (TNT).
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_VXD=1
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit Windows (VxD) compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat
@ -0,0 +1,34 @@
 @echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
 SET USE_DPMI16=
 SET USE_WIN16=1
 SET USE_WIN32=
 SET USE_VXD=
 SET USE_BC5=1
 SET USE_SMX32=
 SET USE_SMX16=
 SET WIN32_GUI=
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
 echo Borland C++ Builder 5.0 16 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat
@ -0,0 +1,40 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET C_INCLUDE=%BCB5_PATH%\INCLUDE
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=1
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto createfiles
 call win32sdk.bat borland
 :createfiles
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat
@ -0,0 +1,34 @@
@echo off
 REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
 if .%CHECKED%==.1 goto checked_build
 SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
 SET USE_WIN16=
 SET USE_WIN32=1
 SET USE_VXD=
 SET USE_TNT=
 SET USE_SMX32=
 SET USE_SMX16=
 SET USE_BC5=1
 SET WIN32_GUI=1
 SET USE_SNAP=
 SET BC_LIBBASE=BC5
 PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
 REM: Create Borland compile/link configuration scripts
 echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
 echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
 echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.
--- a/board/MAI/bios_emulator/scitech/bin/build
+++ b/board/MAI/bios_emulator/scitech/bin/build
@ -0,0 +1,22 @@
 #! /bin/sh
 if [ $# -lt 1 ] || ( [ "$1" != gcc-linux ] && [ "$1" != qnx4 ] ) ; then
 	echo Usage: $0 compiler_name [DMAKE commands]
 	echo
 	echo Current compilers:
 	echo "  gcc-linux  - GNU C/C++ 2.7 or higher, 32 bit"
 	echo "  qnx4  - Watcom C/C++ 10.6 or higher, 32 bit"
 	exit 1
 fi
 unset DBG OPT OPT_SIZE BUILD_DLL IMPORT_DLL FPU CHECKS BETA
 . ${1}.sh
 shift
 dmake $* && exit 0
 echo *************************************************
 echo * An error occurred while building the library. *
 echo *************************************************
 exit 1
--- a/board/MAI/bios_emulator/scitech/bin/build.bat
+++ b/board/MAI/bios_emulator/scitech/bin/build.bat
@ -0,0 +1,4 @@
@echo off
 rem Disable checked build and build release code
 set CHECKED=
 call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9
--- a/board/MAI/bios_emulator/scitech/bin/build_db.bat
+++ b/board/MAI/bios_emulator/scitech/bin/build_db.bat
@ -0,0 +1,4 @@
@echo off
 rem Enable checked build and build debug code
 set CHECKED=1
 call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9
--- a/board/MAI/bios_emulator/scitech/bin/build_it.bat
+++ b/board/MAI/bios_emulator/scitech/bin/build_it.bat
@ -0,0 +1,432 @@
@echo off
 rem Generic batch file to build a version of the library. This batch file
 rem assumes that the correct batch files exist to setup the appropriate
 rem compilation environments, and that the DMAKE.EXE program is available
 rem somewhere on the path.
 rem
 rem Builds as release or debug depending on the value of the CHECKED
 rem environment variable.
 rem Unset all environment variables that change the compile process
 set DBG=
 set OPT=
 set OPT_SIZE=
 set BUILD_DLL=
 set IMPORT_DLL=
 set FPU=
 set CHECKS=
 set BETA=
 if %1==bc31-d16 goto bc31-d16
 if %1==bc45-d16 goto bc45-d16
 if %1==bc45-d32 goto bc45-d32
 if %1==bc45-tnt goto bc45-tnt
 if %1==bc45-w16 goto bc45-w16
 if %1==bc45-w32 goto bc45-w32
 if %1==bc45-c32 goto bc45-c32
 if %1==bc45-vxd goto bc45-vxd
 if %1==bc45-snp goto bc45-snp
 if %1==bc50-d16 goto bc50-d16
 if %1==bc50-d32 goto bc50-d32
 if %1==bc50-tnt goto bc50-tnt
 if %1==bc50-w16 goto bc50-w16
 if %1==bc50-w32 goto bc50-w32
 if %1==bc50-c32 goto bc50-c32
 if %1==bc50-vxd goto bc50-vxd
 if %1==bc50-snp goto bc50-snp
 if %1==gcc2-d32 goto gcc2-d32
 if %1==gcc2-w32 goto gcc2-w32
 if %1==gcc2-c32 goto gcc2-c32
 if %1==gcc2-linux goto gcc2-linux
 if %1==vc40-d16 goto vc40-d16
 if %1==vc40-tnt goto vc40-tnt
 if %1==vc40-w16 goto vc40-w16
 if %1==vc40-w32 goto vc40-w32
 if %1==vc40-c32 goto vc40-c32
 if %1==vc40-drv9x goto vc40-drv9x
 if %1==vc40-drvnt goto vc40-drvnt
 if %1==vc40-rtt goto vc40-rtt
 if %1==vc40-snp goto vc40-snp
 if %1==vc50-d16 goto vc50-d16
 if %1==vc50-tnt goto vc50-tnt
 if %1==vc50-w16 goto vc50-w16
 if %1==vc50-w32 goto vc50-w32
 if %1==vc50-c32 goto vc50-c32
 if %1==vc50-drv9x goto vc50-drv9x
 if %1==vc50-drvnt goto vc50-drvnt
 if %1==vc50-rtt goto vc50-rtt
 if %1==vc50-snp goto vc50-snp
 if %1==vc60-d16 goto vc60-d16
 if %1==vc60-tnt goto vc60-tnt
 if %1==vc60-w16 goto vc60-w16
 if %1==vc60-w32 goto vc60-w32
 if %1==vc60-c32 goto vc60-c32
 if %1==vc60-drv9x goto vc60-drv9x
 if %1==vc60-drvnt goto vc60-drvnt
 if %1==vc60-drvw2k goto vc60-drvw2k
 if %1==vc60-rtt goto vc60-rtt
 if %1==vc60-snp goto vc60-snp
 if %1==wc10ad16 goto wc10ad16
 if %1==wc10ad32 goto wc10ad32
 if %1==wc10atnt goto wc10atnt
 if %1==wc10aw16 goto wc10aw16
 if %1==wc10aw32 goto wc10aw32
 if %1==wc10ac32 goto wc10ac32
 if %1==wc10ao32 goto wc10ao32
 if %1==wc10ap32 goto wc10ap32
 if %1==wc10asnp goto wc10asnp
 if %1==wc10-d16 goto wc10-d16
 if %1==wc10-d32 goto wc10-d32
 if %1==wc10-tnt goto wc10-tnt
 if %1==wc10-w16 goto wc10-w16
 if %1==wc10-w32 goto wc10-w32
 if %1==wc10-c32 goto wc10-c32
 if %1==wc10-o32 goto wc10-o32
 if %1==wc10-p32 goto wc10-p32
 if %1==wc10-snp goto wc10-snp
 if %1==wc11-d16 goto wc11-d16
 if %1==wc11-d32 goto wc11-d32
 if %1==wc11-tnt goto wc11-tnt
 if %1==wc11-w16 goto wc11-w16
 if %1==wc11-w32 goto wc11-w32
 if %1==wc11-c32 goto wc11-c32
 if %1==wc11-o32 goto wc11-o32
 if %1==wc11-p32 goto wc11-p32
 if %1==wc11-snp goto wc11-snp
 echo Usage: BUILD 'compiler_name' [DMAKE commands]
 echo.
 echo Where 'compiler_name' is of the form comp-os, where
 echo 'comp' defines the compiler and 'os' defines the OS environment.
 echo For instance 'bc50-w32' is for Borland C++ 5.0 for Win32.
 echo The value of 'comp' can be any of the following:
 echo.
 echo    bc45 - Borland C++ 4.5x
 echo    bc50 - Borland C++ 5.x
 echo    vc40 - Visual C++ 4.x
 echo    vc50 - Visual C++ 5.x
 echo    vc60 - Visual C++ 6.x
 echo    wc10 - Watcom C++ 10.6
 echo    wc11 - Watcom C++ 11.0
 echo    gcc2 - GNU C/C++ 2.9x
 echo.
 echo The value of 'os' can be one of the following:
 echo.
 echo    d16   - 16-bit DOS
 echo    d32   - 32-bit DOS
 echo    w16   - 16-bit Windows GUI mode
 echo    c32   - 32-bit Windows console mode
 echo    w32   - 32-bit Windows GUI mode
 echo    o16   - 16-bit OS/2 console mode
 echo    o32   - 32-bit OS/2 console mode
 echo    p32   - 32-bit OS/2 Presentation Manager
 echo    snp   - 32-bit SciTech Snap application
 echo    linux - 32-bit Linux application
 goto end
 rem -------------------------------------------------------------------------
 rem Setup for the specified compiler
 :bc31-d16
 call bc31-d16.bat
 goto compileit
 :bc45-d16
 call bc45-d16.bat
 goto compileit
 :bc45-d32
 call bc45-d32.bat
 goto compileit
 :bc45-tnt
 call bc45-tnt.bat
 goto compileit
 :bc45-w16
 call bc45-w16.bat
 goto compileit
 :bc45-w32
 call bc45-w32.bat
 goto compileit
 :bc45-c32
 call bc45-c32.bat
 goto compileit
 :bc45-vxd
 call bc45-vxd.bat
 goto compileit
 :bc50-d16
 call bc50-d16.bat
 goto compileit
 :bc50-d32
 call bc50-d32.bat
 goto compileit
 :bc50-tnt
 call bc50-tnt.bat
 goto compileit
 :bc50-w16
 call bc50-w16.bat
 goto compileit
 :bc50-w32
 call bc50-w32.bat
 goto compileit
 :bc50-c32
 call bc50-c32.bat
 goto compileit
 :bc50-vxd
 call bc50-vxd.bat
 goto compileit
 :gcc2-d32
 call gcc2-d32.bat
 goto compileit
 :gcc2-w32
 call gcc2-w32.bat
 goto compileit
 :gcc2-c32
 call gcc2-c32.bat
 goto compileit
 :gcc2-linux
 call gcc2-linux.bat
 goto compileit
 :sc70-d16
 call sc70-d16.bat
 goto compileit
 :sc70-w16
 call sc70-w16.bat
 goto compileit
 :sc70-tnt
 call sc70-tnt.bat
 goto compileit
 :sc70-w32
 call sc70-w32.bat
 goto compileit
 :sc70-c32
 call sc70-c32.bat
 goto compileit
 :vc40-d16
 call vc40-d16.bat
 goto compileit
 :vc40-tnt
 call vc40-tnt.bat
 goto compileit
 :vc40-w16
 call vc40-w16.bat
 goto compileit
 :vc40-w32
 call vc40-w32.bat
 goto compileit
 :vc40-c32
 call vc40-c32.bat
 goto compileit
 :vc40-drv9x
 call vc40-drv9x.bat
 goto compileit
 :vc40-drvnt
 call vc40-drvnt.bat
 goto compileit
 :vc40-rtt
 call vc40-rtt.bat
 goto compileit
 :vc50-d16
 call vc50-d16.bat
 goto compileit
 :vc50-tnt
 call vc50-tnt.bat
 goto compileit
 :vc50-w16
 call vc50-w16.bat
 goto compileit
 :vc50-w32
 call vc50-w32.bat
 goto compileit
 :vc50-c32
 call vc50-c32.bat
 goto compileit
 :vc50-drv9x
 call vc50-drv9x.bat
 goto compileit
 :vc50-drvnt
 call vc50-drvnt.bat
 goto compileit
 :vc50-rtt
 call vc50-rtt.bat
 goto compileit
 :vc60-d16
 call vc60-d16.bat
 goto compileit
 :vc60-tnt
 call vc60-tnt.bat
 goto compileit
 :vc60-w16
 call vc60-w16.bat
 goto compileit
 :vc60-w32
 call vc60-w32.bat
 goto compileit
 :vc60-c32
 call vc60-c32.bat
 goto compileit
 :vc60-drv9x
 call vc60-drv9x.bat
 goto compileit
 :vc60-drvnt
 call vc60-drvnt.bat
 goto compileit
 :vc60-drvw2k
 call vc60-drvw2k.bat
 goto compileit
 :vc60-rtt
 call vc60-rtt.bat
 goto compileit
 :wc10ad16
 call wc10ad16.bat
 goto compileit
 :wc10ad32
 call wc10ad32.bat
 goto compileit
 :wc10atnt
 call wc10atnt.bat
 goto compileit
 :wc10aw16
 call wc10aw16.bat
 goto compileit
 :wc10aw32
 call wc10aw32.bat
 goto compileit
 :wc10ac32
 call wc10ac32.bat
 goto compileit
 :wc10ao32
 call wc10ao32.bat
 goto compileit
 :wc10ap32
 call wc10ap32.bat
 goto compileit
 :wc10-d16
 call wc10-d16.bat
 goto compileit
 :wc10-d32
 call wc10-d32.bat
 goto compileit
 :wc10-tnt
 call wc10-tnt.bat
 goto compileit
 :wc10-w16
 call wc10-w16.bat
 goto compileit
 :wc10-w32
 call wc10-w32.bat
 goto compileit
 :wc10-c32
 call wc10-c32.bat
 goto compileit
 :wc10-o32
 call wc10-o32.bat
 goto compileit
 :wc10-p32
 call wc10-p32.bat
 goto compileit
 :wc11-d16
 call wc11-d16.bat
 goto compileit
 :wc11-d32
 call wc11-d32.bat
 goto compileit
 :wc11-tnt
 call wc11-tnt.bat
 goto compileit
 :wc11-w16
 call wc11-w16.bat
 goto compileit
 :wc11-w32
 call wc11-w32.bat
 goto compileit
 :wc11-c32
 call wc11-c32.bat
 goto compileit
 :wc11-o32
 call wc11-o32.bat
 goto compileit
 :wc11-p32
 call wc11-p32.bat
 goto compileit
 :compileit
 k_rm -f *.lib *.a
 dmake %2 %3 %4 %5 %6 %7 %8 %9
 if errorlevel 1 goto errorend
 goto end
 :errorend
 echo *************************************************
 echo * An error occurred while building the library. *
 echo *************************************************
 :end
--- a/board/MAI/bios_emulator/scitech/bin/cddrv.bat
+++ b/board/MAI/bios_emulator/scitech/bin/cddrv.bat
@ -0,0 +1,6 @@
@echo off
 %1
 cd %3
 %4 %5 %6 %7 %8 %9
 %2
--- a/board/MAI/bios_emulator/scitech/bin/cdit
+++ b/board/MAI/bios_emulator/scitech/bin/cdit
@ -0,0 +1,10 @@
 #! /bin/sh
 cd $1
 PROG=$2
 shift 2
 rm -f *.lib *.a
 $PROG $*
 RET=$?
 cd ..
 exit $RET
--- a/board/MAI/bios_emulator/scitech/bin/cdit.bat
+++ b/board/MAI/bios_emulator/scitech/bin/cdit.bat
@ -0,0 +1,5 @@
@echo off
 cd %1
 k_rm -f *.lib *.a
 shift 1
 %1 %2 %3 %4 %5 %6 %7 %8 %9
--- a/board/MAI/bios_emulator/scitech/bin/djgpp.env
+++ b/board/MAI/bios_emulator/scitech/bin/djgpp.env
@ -0,0 +1,46 @@
 #= Don't edit this line unless you move djgpp.env outside
 #= of the djgpp installation directory.  If you do move
 #= it, set DJDIR to the directory you installed DJGPP in.
 #=
 DJDIR=%:/>DJGPP%
 +USER=dosuser
 +TMPDIR=%DJDIR%/tmp
 +EMU387=%DJDIR%/bin/emu387.dxe
 +LFN=y
 [bison]
 BISON_HAIRY=%DJDIR%/lib/bison.hai
 BISON_SIMPLE=%DJDIR%/lib/bison.sim
 [cpp]
 CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
 C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
 OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
 OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
 [gcc]
 COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
 LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/release/dos32/dj2
 [info]
 INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
 INFO_COLORS=0x1f.0x31
 [emacs]
 INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
 [less]
 LESSBINFMT=*k<%X>
 LESSCHARDEF=8bcccbcc12bc5b95.b127.b
 LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
 [locate]
 +LOCATE_PATH=%DJDIR%/lib/locatedb.dat
 [ls]
 +LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
 [dir]
 +LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
 [vdir]
 +LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
--- a/board/MAI/bios_emulator/scitech/bin/djgpp_db.env
+++ b/board/MAI/bios_emulator/scitech/bin/djgpp_db.env
@ -0,0 +1,46 @@
 #= Don't edit this line unless you move djgpp.env outside
 #= of the djgpp installation directory.  If you do move
 #= it, set DJDIR to the directory you installed DJGPP in.
 #=
 DJDIR=%:/>DJGPP%
 +USER=dosuser
 +TMPDIR=%DJDIR%/tmp
 +EMU387=%DJDIR%/bin/emu387.dxe
 +LFN=y
 [bison]
 BISON_HAIRY=%DJDIR%/lib/bison.hai
 BISON_SIMPLE=%DJDIR%/lib/bison.sim
 [cpp]
 CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
 C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
 OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
 OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
 [gcc]
 COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
 LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/debug/dos32/dj2
 [info]
 INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
 INFO_COLORS=0x1f.0x31
 [emacs]
 INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
 [less]
 LESSBINFMT=*k<%X>
 LESSCHARDEF=8bcccbcc12bc5b95.b127.b
 LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
 [locate]
 +LOCATE_PATH=%DJDIR%/lib/locatedb.dat
 [ls]
 +LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
 [dir]
 +LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
 [vdir]
 +LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
--- a/board/MAI/bios_emulator/scitech/bin/findint3.bat
+++ b/board/MAI/bios_emulator/scitech/bin/findint3.bat
@ -0,0 +1 @@
 perl c:\scitech\src\perl\findint3.per
--- a/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh
+++ b/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh
@ -0,0 +1,16 @@
 #! /bin/sh
 # Setup for compiling with GCC/G++ for BeOS
 if [ "$CHECKED" = "1" ]; then
    echo Checked debug build enabled.
 else
    echo Release build enabled.
 fi
 export MAKESTARTUP=$SCITECH/makedefs/gcc_beos.mk
 export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
 export USE_X11=0
 export USE_BEOS=1
 echo GCC BeOS console compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh
+++ b/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh
@ -0,0 +1,16 @@
 #! /bin/sh
 # Setup for compiling with GCC/G++ for FreeBSD
 if [ "$CHECKED" = "1" ]; then
    echo Checked debug build enabled.
 else
    echo Release build enabled.
 fi
 export MAKESTARTUP=$SCITECH/makedefs/gcc_freebsd.mk
 export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
 export USE_X11=1
 export USE_FREEBSD=1
 echo GCC FreeBSD console compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh
+++ b/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh
@ -0,0 +1,19 @@
 #! /bin/sh
 # Setup for compiling with GCC/G++ for Linux
 if [ "$CHECKED" = "1" ]; then
    echo Checked debug build enabled.
 else
    echo Release build enabled.
 fi
 export MAKESTARTUP=$SCITECH/makedefs/gcc_linux.mk
 export INCLUDE="include;$SCITECH/include;$PRIVATE/include"
 export USE_LINUX=1
 if [ "x$LIBC" = x ]; then
 	echo "GCC Linux console compilation environment set up (glib)"
 else
 	echo "GCC Linux console compilation environment set up (libc5)"
 fi
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat
@ -0,0 +1,26 @@
@echo off
 REM Setup for compiling with GNU C compiler
 if .%CHECKED%==.1 goto checked_build
 set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
 echo Release build enabled.
 goto setvars
 :checked_build
 set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
 echo Checked debug build enabled.
 goto setvars
 :setvars
 set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
 set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
 set MAKE_MODE=
 set USE_WIN16=
 set USE_WIN32=1
 set WIN32_GUI=
 set USE_SNAP=
 set GCC_LIBBASE=gcc2
 PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
 echo GCC 2.9.x 32-bit Win32 console compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat
@ -0,0 +1,28 @@
@echo off
 REM Setup for compiling with DJGPP 2.02
 if .%CHECKED%==.1 goto checked_build
 set LIB=%SCITECH_LIB%\LIB\release\dos32\dj2
 %SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP.ENV %DJ_PATH%\DJGPP.ENV
 echo Release build enabled.
 goto setvars
 :checked_build
 set LIB=%SCITECH_LIB%\LIB\debug\dos32\dj2
 %SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP_DB.ENV %DJ_PATH%\DJGPP.ENV
 echo Checked debug build enabled.
 goto setvars
 :setvars
 set DJGPP=%DJ_PATH%\DJGPP.ENV
 set INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%DJ_PATH%\INCLUDE;
 set MAKESTARTUP=%SCITECH%\MAKEDEFS\DJ32.MK
 set USE_WIN16=
 set USE_WIN32=
 set WIN32_GUI=
 set USE_SNAP=
 set DJ_LIBBASE=dj2
 PATH %SCITECH_BIN%;%DJ_PATH%\BIN;%DEFPATH%
 echo DJGPP 2.02 32-bit DOS compilation environment set up (DPMI).
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat
@ -0,0 +1,26 @@
@echo off
 REM Setup for compiling with GNU C cross-compiler
 if .%CHECKED%==.1 goto checked_build
 set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
 echo Release build enabled.
 goto setvars
 :checked_build
 set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
 echo Checked debug build enabled.
 goto setvars
 :setvars
 set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
 set MAKESTARTUP=%SCITECH%\MAKEDEFS\gcc_linux.mk
 set MAKE_MODE=UNIX
 set USE_WIN16=
 set USE_WIN32=
 set WIN32_GUI=
 set USE_SNAP=
 set GCC_LIBBASE=gcc2
 PATH %SCITECH_BIN%;%GCC2_PATH%\cross-linux\i386-redhat-linux\BIN;%DEFPATH%
 echo GCC 2.9.x 32-bit Linux console cross compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat
@ -0,0 +1,26 @@
@echo off
 REM Setup for compiling with GNU C compiler
 if .%CHECKED%==.1 goto checked_build
 set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
 echo Release build enabled.
 goto setvars
 :checked_build
 set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
 echo Checked debug build enabled.
 goto setvars
 :setvars
 set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
 set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
 set MAKE_MODE=
 set USE_WIN16=
 set USE_WIN32=1
 set WIN32_GUI=1
 set USE_SNAP=
 set GCC_LIBBASE=gcc2
 PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
 echo GCC 2.9.x 32-bit Win32 GUI compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/makelib.bat
+++ b/board/MAI/bios_emulator/scitech/bin/makelib.bat
@ -0,0 +1,97 @@
 call wc11-d32.bat
 cd c:\private\src\license
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\pm
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\console
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\nucleus
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\zlib
 dmake clean
 dmake depend
 dmake -u install
 cd c:\private\src\graphics\ref2d
 dmake clean
 dmake depend
 dmake -u install
 cd c:\private\src\drvlib
 dmake clean
 dmake depend
 dmake -u install
 call wc11-w32.bat
 cd c:\private\src\license
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\pm
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\console
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\nucleus
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\zlib
 dmake clean
 dmake depend
 dmake -u install
 cd c:\private\src\graphics\ref2d
 dmake clean
 dmake depend
 dmake -u install
 cd c:\private\src\drvlib
 dmake clean
 dmake depend
 dmake -u install
 call wc10-d32.bat
 cd c:\private\src\license
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\pm
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\console
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\nucleus
 dmake clean
 dmake depend
 dmake -u install
 cd c:\scitech\src\zlib
 dmake clean
 dmake depend
 dmake -u install
 cd c:\private\src\graphics\ref2d
 dmake clean
 dmake depend
 dmake -u install
 cd c:\private\src\drvlib
 dmake clean
 dmake depend
 dmake -u install
 cd \private\src\graphics\drivers
--- a/board/MAI/bios_emulator/scitech/bin/meltobjs.sh
+++ b/board/MAI/bios_emulator/scitech/bin/meltobjs.sh
@ -0,0 +1,23 @@
 #! /bin/sh
 #
 # This script generates a single object file from a set of libraries (*.a files)
 # Usage: meltobjs.sh target.o library1.a library2.a ...
 #
 # (C) SciTech Software, Inc. 1998
 #
 TMPDIR=/tmp/melt$$
 TARGET=$1
 TARGETDIR=$PWD
 shift
 mkdir $TMPDIR
 cd $TMPDIR
 for a in $*
 do
    ar x $a
 done
 ld -r -o $TARGETDIR/$TARGET *.o
 rm -fr $TMPDIR
--- a/board/MAI/bios_emulator/scitech/bin/ntddk.bat
+++ b/board/MAI/bios_emulator/scitech/bin/ntddk.bat
@ -0,0 +1,42 @@
@echo off
 REM: Set up environment variables for Microsoft Windows NT DDK development.
 REM: Note that we have hard coded this for Windows NT i386 development.
 SET USE_NTDRV=1
 SET USE_W2KDRV=
 SET BASEDIR=%NT_DDKROOT%
 SET PATH=%BASEDIR%\bin;%PATH%
 SET NTMAKEENV=%BASEDIR%\inc
 SET BUILD_MAKE_PROGRAM=nmake.exe
 SET BUILD_DEFAULT=-ei -nmake -i
 SET BUILD_DEFAULT_TARGETS=-386
 SET _OBJ_DIR=obj
 SET NEW_CRTS=1
 SET _NTROOT=%BASEDIR%
 SET INCLUDE=%BASEDIR%\inc;%INCLUDE%
 if .%CHECKED%==.1 goto checked
 REM: set up an NT free build environment
 SET DDKBUILDENV=free
 SET C_DEFINES=-D_IDWBUILD
 SET NTDBGFILES=1
 SET NTDEBUG=
 SET NTDEBUGTYPE=
 SET MSC_OPTIMIZATION=
 set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\RELEASE\NTDRV\VC6;%MSVCDir%\LIB;.
 goto done
 :checked
 REM: set up an NT checked build environment
 SET DDKBUILDENV=checked
 SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
 SET NTDBGFILES=
 SET NTDEBUG=ntsd
 SET NTDEBUGTYPE=both
 SET MSC_OPTIMIZATION=/Od /Oi
 set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\DEBUG\NTDRV\VC6;%MSVCDir%\LIB;.
 :done
--- a/board/MAI/bios_emulator/scitech/bin/qnx4.sh
+++ b/board/MAI/bios_emulator/scitech/bin/qnx4.sh
@ -0,0 +1,18 @@
 #! /bin/sh
 # Setup for compiling with Watcom C/C++ for QNX4
 if [ "$CHECKED" = "1" ]; then
    echo Checked debug build enabled.
 else
    echo Release build enabled.
 fi
 export MAKESTARTUP=$SCITECH/makedefs/qnx4.mk
 export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/include"
 export USE_QNX=1
 export USE_QNX4=1
 export WC_LIBBASE=wc10
 echo Qnx 4 console compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/qnxnto.sh
+++ b/board/MAI/bios_emulator/scitech/bin/qnxnto.sh
@ -0,0 +1,21 @@
 #! /bin/sh
 # Setup for compiling with Watcom C/C++ for QNX Neutrino
 if [ "$CHECKED" = "1" ]; then
    echo Checked debug build enabled.
 else
    echo Release build enabled.
 fi
 if [ X$GCC_PATH = "X" ]; then
 	export GCC_PATH=/usr/gcc/bin
 fi
 export MAKESTARTUP=$SCITECH/makedefs/qnxnto.mk
 export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/nto/include"
 export USE_BIOS=1	# VBIOS lib is tiny under Neutrino, always include it
 export USE_QNX=1
 export USE_QNXNTO=1
 echo Qnx Neutrino console compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh
@ -0,0 +1,42 @@
 #! /bin/sh
 # BeOS VERSION
 # Set the place where SciTech Software is installed, and where each
 # of the supported compilers is installed. These environment variables
 # are used by the batch files in the SCITECH\BIN directory.
 #
 # Modify the as appropriate for your compiler configuration (you should
 # only need to change things in this batch file).
 #
 # This version is for a normal BeOS installation.
 # The SCITECH variable points to where batch files, makefile startups,
 # include files and source files will be found when compiling.
 export SCITECH=$MGL_ROOT 
 # The SCITECH_LIB variable points to where the SciTech libraries live
 # for installation and linking. This allows you to have the source and
 # include files on local machines for compiling and have the libraries
 # located on a common network machine (for network builds).
 export SCITECH_LIB=$SCITECH
 # The PRIVATE variable points to where private source files reside that
 # do not live in the public source tree
 export PRIVATE=$HOME/private
 # The following define the locations of all the compilers that you may
 # be using. Change them to reflect where you have installed your
 # compilers.
 export GCC_PATH=/boot/develop/tools/gnupro/bin
 # Add the Scitech bin path to the current PATH
 export PATH=$SCITECH/bin:$SCITECH/bin-beos:$PATH
 #if [ "x$LIBC" = x ]; then
 #	export PATH=$PATH:$SCITECH/bin-beos/glibc
 #else
 #	export PATH=$PATH:$SCITECH/bin-beos/libc
 #fi
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh
@ -0,0 +1,37 @@
 #! /bin/sh
 # LINUX VERSION
 # Set the place where SciTech Software is installed, and where each
 # of the supported compilers is installed. These environment variables
 # are used by the batch files in the SCITECH\BIN directory.
 #
 # Modify the as appropriate for your compiler configuration (you should
 # only need to change things in this batch file).
 #
 # This version is for a normal Linux installation.
 # The SCITECH variable points to where batch files, makefile startups,
 # include files and source files will be found when compiling.
 export SCITECH=$MGL_ROOT 
 # The SCITECH_LIB variable points to where the SciTech libraries live
 # for installation and linking. This allows you to have the source and
 # include files on local machines for compiling and have the libraries
 # located on a common network machine (for network builds).
 export SCITECH_LIB=$SCITECH
 # The PRIVATE variable points to where private source files reside that
 # do not live in the public source tree
 export PRIVATE=$HOME/private
 # The following define the locations of all the compilers that you may
 # be using. Change them to reflect where you have installed your
 # compilers.
 export GCC_PATH=/usr/bin
 # Add the Scitech bin path to the current PATH
 export PATH=$SCITECH/bin:$SCITECH/bin-freebsd:$PATH
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh
@ -0,0 +1,43 @@
 #! /bin/sh
 # LINUX VERSION
 # Set the place where SciTech Software is installed, and where each
 # of the supported compilers is installed. These environment variables
 # are used by the batch files in the SCITECH\BIN directory.
 #
 # Modify the as appropriate for your compiler configuration (you should
 # only need to change things in this batch file).
 #
 # This version is for a normal Linux installation.
 # The SCITECH variable points to where batch files, makefile startups,
 # include files and source files will be found when compiling.
 export SCITECH=$MGL_ROOT 
 # The SCITECH_LIB variable points to where the SciTech libraries live
 # for installation and linking. This allows you to have the source and
 # include files on local machines for compiling and have the libraries
 # located on a common network machine (for network builds).
 export SCITECH_LIB=$SCITECH
 # The PRIVATE variable points to where private source files reside that
 # do not live in the public source tree
 export PRIVATE=$HOME/private
 # The following define the locations of all the compilers that you may
 # be using. Change them to reflect where you have installed your
 # compilers.
 export GCC_PATH=/usr/bin
 export TEMP=/tmp TMP=/tmp
 # Add the Scitech bin path to the current PATH
 export PATH=$SCITECH/bin:$SCITECH/bin-linux:$PATH
 if [ "x$LIBC" = x ]; then
 	export PATH=$SCITECH/bin-linux/glibc:$PATH
 else
 	export PATH=$SCITECH/bin-linux/libc:$PATH
 fi
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh
@ -0,0 +1,37 @@
 #! /bin/sh
 # QNX 4 VERSION
 # Set the place where SciTech Software is installed, and where each
 # of the supported compilers is installed. These environment variables
 # are used by the batch files in the SCITECH\BIN directory.
 #
 # Modify the as appropriate for your compiler configuration (you should
 # only need to change things in this batch file).
 #
 # This version is for a normal Linux installation.
 # The SCITECH variable points to where batch files, makefile startups,
 # include files and source files will be found when compiling.
 export SCITECH=$MGL_ROOT 
 # The SCITECH_LIB variable points to where the SciTech libraries live
 # for installation and linking. This allows you to have the source and
 # include files on local machines for compiling and have the libraries
 # located on a common network machine (for network builds).
 export SCITECH_LIB=$SCITECH
 # The PRIVATE variable points to where private source files reside that
 # do not live in the public source tree
 export PRIVATE=$HOME/private
 # The following define the locations of all the compilers that you may
 # be using. Change them to reflect where you have installed your
 # compilers.
 export WC10_PATH=/usr/watcom/10.6/usr
 # Add the Scitech bin path to the current PATH
 export PATH=$SCITECH/bin:$SCITECH/bin-qnx:$PATH
--- a/board/MAI/bios_emulator/scitech/bin/set-vars.bat
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars.bat
@ -0,0 +1,110 @@
@echo off
 REM:=========================================================================
 REM: Master batch file to set up all necessary environment variables for
 REM: the SciTech makefile utilities. This batch file should be executed
 REM: *first* before any other batch files when you start a command shell.
 REM: You should not need to modify any batch files except this one to
 REM: configure the makefile utilities.
 REM:=========================================================================
 REM: Set the place where SciTech Software is installed, and where each
 REM: of the supported compilers is installed. These environment variables
 REM: are used by the batch files in the SCITECH\BIN directory.
 REM:
 REM: Modify the as appropriate for your compiler configuration (you should
 REM: only need to change things in this batch file).
 REM:
 REM: This version is for a normal MSDOS installation.
 REM: The SCITECH variable points to where batch files, makefile startups,
 REM: include files and source files will be found when compiling.
 SET SCITECH=c:\scitech
 REM: The SCITECH_LIB variable points to where the SciTech libraries live
 REM: for installation and linking. This allows you to have the source and
 REM: include files on local machines for compiling and have the libraries
 REM: located on a common network machine (for network builds).
 SET SCITECH_LIB=%SCITECH%
 REM: The PRIVATE variable points to where private source files reside that
 REM: do not live in the public source tree
 SET PRIVATE=c:\private
 REM: The following sets up the path to the SciTech command line utilities
 REM: for the development operating system. We select either DOS hosted
 REM: tools or Win32 hosted tools depending on whether you are running
 REM: on NT or not. Windows 9x users can use the Win32 hosted tools but
 REM: they run slower, but you will have long filenames if you do this.
 IF .%OS%==.Windows_NT goto Win32_path
 IF NOT .%WINDIR%==. goto Win32_path
 SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-dos
 goto path_set
 REM: The following sets up the path to the SciTech command line utilities
 REM: for the development operating system. This version uses the Win32
 REM: hosted tools by default, so you can use long filenames.
 :Win32_path
 SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-win32
 :path_set
 REM: Set the TMP variable for dmake if this is not already set
 SET TMP=%SCITECH%
 REM: Set the following environment variable to use the Netwide Assembler
 REM: (NASM) provided with the MGL tools to build all assembler modules.
 REM: If you have Turbo Assembler 4.0 or later and you wish to use it,
 REM: you can use it by removing the following line.
 SET USE_NASM=1
 REM: The following is used to set up DDK directories for device driver
 REM: development. They can safely be ignored unless you are using the
 REM: SciTech makefile utilities to build device drivers.
 SET DDKDRIVE=c:
 SET MSSDK=c:\c\win32sdk
 SET W95_DDKROOT=c:\c\95ddk
 SET W98_DDKROOT=c:\c\98ddk
 SET NT_DDKROOT=c:\c\ntddk
 SET W2K_DDKROOT=c:\c\2000ddk
 SET MASM_ROOT=c:\c\masm611
 SET VTOOLSD=c:\c\vtd95
 SET SOFTICE_PATH=c:\c\sint
 REM: The following define the locations of all the compilers that you may
 REM: be using. Change them to reflect where you have installed your
 REM: compilers.
 SET BC3_PATH=c:\c\bc3
 SET BC4_PATH=c:\c\bc45
 SET BC5_PATH=c:\c\bc50
 SET BCB5_PATH=c:\c\bcb50
 SET VC_PATH=c:\c\msvc
 SET VC4_PATH=c:\c\vc42
 SET VC5_PATH=c:\c\vc50
 SET VC6_PATH=c:\c\vc60
 SET SC70_PATH=c:\c\sc75
 SET WC10A_PATH=c:\c\wc10a
 SET WC10_PATH=c:\c\wc10
 SET WC11_PATH=c:\c\wc11
 SET TNT_PATH=c:\c\tnt
 SET DJ_PATH=c:\c\djgpp
 SET GCC2_PATH=c:\unix\usr
 REM: The following define the locations of the IDE and compiler path
 REM: tools for Visual C++. If you do a standard installation, you wont
 REM: need to change this. If however you did a custom install and changed
 REM: the paths to these directory, you will need to modify this to suit.
 SET VC5_MSDevDir=%VC5_PATH%\sharedide
 SET VC5_MSVCDir=%VC5_PATH%\vc
 SET VC6_MSDevDir=%VC6_PATH%\common\msdev98
 SET VC6_MSVCDir=%VC6_PATH%\vc98
--- a/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat
@ -0,0 +1,36 @@
@echo off
 REM Setup environment variables for Visual C++ 4.2 32 bit edition
 if .%CHECKED%==.1 goto checked_build
 set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 set TOOLROOTDIR=%VC4_PATH%
 set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
 set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
 set INIT=%VC4_PATH%
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
 SET USE_TNT=
 SET USE_WIN16=
 SET USE_WIN32=1
 SET WIN32_GUI=
 SET USE_VXD=
 SET USE_NTDRV=
 SET USE_RTTARGET=
 SET USE_SNAP=
 SET VC_LIBBASE=VC4
 PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
 REM: Enable Win32 SDK if desired (sdk on command line)
 if NOT .%1%==.sdk goto done
 call win32sdk.bat
 :done
 echo Visual C++ 4.2 32 bit Windows compilation environment set up
--- a/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat
@ -0,0 +1,27 @@
@echo off
 REM Setup environment variables for Visual C++ 1.52c 16 bit edition
 if .%CHECKED%==.1 goto checked_build
 set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC4;%VC_PATH%\LIB;.
 echo Release build enabled.
 goto setvars
 :checked_build
 set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC4;%VC_PATH%\LIB;.
 echo Checked debug build enabled.
 goto setvars
 :setvars
 set TOOLROOTDIR=%VC_PATH%
 set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
 set INIT=%VC_PATH%
 SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
 SET USE_WIN16=
 SET USE_WIN32=
 SET USE_RTTARGET=
 SET USE_SNAP=
 SET VC_LIBBASE=VC4
 PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
 echo Visual C++ 1.52c 16 DOS bit compilation environment set up.
--- a/Show More
+++ b/Show More
`@ -1 +1 @@`
	`TEXT_BASE = 0xFFE00000`	`TEXT_BASE = 0xF0000000`